Ipad facetime no audio output since ios7.0.3 update. Was working pre update

My ipad facetime has no sound since i did the latest ios release last week. Perfect picture no audio. I can hear the caller but they cannot hear me. Please help.

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

Similar Messages

Audio output and left USB port is not working!

Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
What happened?
Part No.: Z0JH000TE RS

If the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
The newest BIOS is already installed?
Have you removed all USB ports from device manager and restarted your notebook?
If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :)

Why did the new update for my macbook air hinder my ability to use my camera for google and skype but not photobooth or facetime??? This is messed up it was working yesterday and now neither google or facetime can find a camera on from my mac?

Why did the new update for my macbook air hinder my ability to use my camera for google and skype but not photobooth or facetime??? This is messed up it was working yesterday and now neither google or skype can find a camera on from my mac? what do I do??

An update for same is coming.
Theres a patch for same, see here:
https://discussions.apple.com/thread/5306216?tstart=30

My iPad 2 will not connect to my wifi. It was working and now will not connect.

My iPad 2 will no longer connect to my wifi. It was working and just stopped. My wifi still works on my laptop. I have tried resetting my network connections, rebooting, turning wifi off and then back on. Not sure what else to do.....

So whats the exact issue? Can you see the network? What happens when you try and connect to the network
If you can see the network and can connect to it do you see a little blue circle with an arrow pointing to the right? If you do could you please click that & confirm what IP address you are receiving.

My iPad mini will not backup since ios7; i have tried deleting the account,etc..it says the last backup could not be completed

i can not back up my ipad mini over wifi into icloud...since ios7

Morning joohn101,
Thanks for using Apple Support Communities.
You can resolve backup errors by following the steps in this article.
For more information on this, take a look at this article:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
and
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Best of luck,
Mario

IPad 3 (old connector) pausing since ios7 ?

Since the update to 7 from time to time the pad seems to hang for a few moments and then resume this even happens in text entry ( for example as I was hunt and peck typing this the letters stopped showing up on screen as I typed the word hang above, then the words for a few momen. Were put up just before I hit the t in moment...
I see this in every thing from a simple solitaire game where the card turning will stop for quite a few sec. And it makes some games all but unusable
I am guessing this is caused by the iOS 7 being designed for the new faster processors but is there any way I can adjust the settings to reduce the problem?
This is on the first version of the retina iPad

Have you tried these:
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Audio issues since Snow Leopard 10.6.8 and Lion update

My problem since the update 10.6.8 of Snow Leopard and also after updating to Lion, has been that after playing a surroundsound movie or some kind of audio 5.1 all of the audio from the (in my case) mac mini, except for another 5.1 soundsource stops working.
I know that many people experiences similar problem, some people have no audio at all and some people have the problem the other way around, after playing a 2.0 soundsource no 5.1 soundsource is audioable. And it seems that the SL update or Lion is the key to this problem.
I dont know if there is some kind of fix for this or it's just to sit back and wait for another update?

There has been an update release for 10.6.8 that
supposedly fixes things. Some have said that
some of the fixes done for 10.6.8 work for Lion.
They do require messing with system files though.
May just want to wait for an official Lion update.

HT4623 I downloaded ios7 and initially it was working fine. Now it is flashing from my home screen to the white screen with the black apple every 3-5 seconds. It's so annoying and I can't make it stop! I tried shutting down all the way - nope! HELP!

I downloaded ios7 on my iphone 5 yesterday. All day it worked fine, then last evening it started blinking from the white screen with the black apple to my home screen. Each screen only stays up for 3-5 seconds then switches back. I have tried shutting down and it is still happening! Does anyone know how to fix this issue without having to go into the store?

Your power adapter is OK. If the only place it will not work is in your home, your house wiring and / or the appliances connected to it are likely to be the reason your Mac will not charge.
From Troubleshooting MagSafe adapters:
Identify line noise issues.
Unplug the power adapter from the wall, let it sit for 60 seconds, then plug the adapter back in.
If the adapter works after this 60-second "rest", you most likely have a line noise issue with your power source. You should reset the adapter periodically by repeating this moment of rest. This issue occurs when the AC adapter's "over voltage protection" feature senses ground noise and then turns off the adapter.
Some possible sources of line noise include lights with ballasts, refrigerators, or mini-refrigerators that are on the same electrical circuit as your computer. This behavior may not occur if you plug the power adapter into an uninterruptible power supply (UPS) or plug it into a different circuit.
Unless the adapter continues to exhibit this behavior on a known good outlet, it does not need to be replaced.
Household wiring problems are very common. They can also be very dangerous. Fortunately most problems can be easily fixed by a qualified electrician.

I have an application with my bank (Banque populaire) named cyberplus. I can't no more manage my bank accounts since last week when there was a new update version of Firefox

I can't no more logged on my banks accounts since the last week-end and : I enter the good logging and password and the web site answer always just : "Fermeture de votre espace sécurisé
Votre connexion étant inactive depuis plusieurs minutes,
par mesure de sécurité, vous avez été automatiquement déconnecté. Pour retourner dans votre espace sécurisé, identifiez-vous à nouveau depuis la page d’accès. ".Cyberplus said that the reason is the new update of firefox

The old Firefox is no longer supported and presumably no longer supported by your email service so there is not much we can do to help you. Itis of course totally insecure.
If you must attempt to use Fx3.6 have you tried zooming the page or trying to work out if there are any keyboard shortcuts available for the actions. You should contact your email provider's support site for help
* [[Problems with email and how to find help]]

IPad audio output is not working properly, except on Siri. Any ideas on what is wrong and how to fix it?

iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
my iPad is a 3rd gen, 16GB wifi only model, if that helps
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!

Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

No Audio Output or Internal Speakers

Just this weekend my computer suddenly stopped emitting any sound. I can change the volume levels but there are no "chirping" sounds when I change it. I have no sound when I restart my computer, I fiddled with the audio output jack to see if it was the switch, but nothing happened.
My computer thinks it has sound. Sometimes when I try to have it make sound it will make a small pop sound. Other than that, nothing at all.

I'm having the same sort of troubles. I checked the Sound pane in Preferences, and that fixed it once, where under Output it was set incorrectly.
But since then, I've been having trouble even doing that: It's stopped detecting if I have headphones plugged in, and says only "Internal Speakers". Under that, instead of controls, it says "The selected device has no output controls".
So what have I ended up doing? I noticed that AirPhones worked (software-based, forwards over wifi to your iPhone, sounds like a 96kbps MP3 at times) -- occasionally as what I assume is a side-effect of this problem, iTunes stops playing and stays at 0:00 even when the Play button changes to Pause -- So given that another sound option worked, I decided I'd plug in my Creative E-MU 0404 to use as an external sound card. And the sound is perfect.
I'd suggest anyone having troubles with their Mac's sound card to add a new one. Unfortunately, you'll need to skip any PCIe Creative sound cards, and even likely most of the X-Fi series, as the USB ones I looked at don't support Mac. The best thing to get, it looks like, is the Creative Xmod. It has Mac, Linux and Windows compatibility, and will work with a power adapter with any MP3 player. It will sound AMAZING, I promise. My dad has one, actually.
Those looking for excuses to use XLR mics or MIDI in Garageband, grab something like the Creative EMU 0404 if you're made of money (sigh) or if you have Firewire for extra XLR inputs, pay the extra. (It's worth it for the flexibility. I'd rather have 8 channels for 3 times the price than the 2 channels I have now. Live and learn.)
Of course, Creative isn't the only option out there, you can also take a look at M-Audio, or if you don't care about sound quality (I'm only assuming here), even Griffin iMic: http://www.griffintechnology.com/products/imic

Select audio output manually?

Hi
is there any solution to select the audio output manually?
My problem is, it works only without plugged in 3,5mm Analogue output. I can select the hdmi, or internl speaker
But right after I put the 3,5mm output to my MacMini, all the choices deselected, and only the line out is active.
I would keep the line out plugged in (through my PA), and keep the HDMI cable as well.
Then I would like to chose between the outputs manually
Regards
Peter

No.
You can not switch back and forth when something is plugged into the Audio Output (headphone) port, because there is a micro switch built into the port that only allows the software to output thru the Audio Output (headphone) port.
From:
https://discussions.apple.com/message/21190197#21190197

NO AUDIO OUTPUT DEVICE IS INSTALLED AFTER WINDOWS 8.1 UPDATES

Hi,
Getting the error " No Audio Output device installed" on my laptop after installing windows update on 8.1.
Please let me know what can be the cause of this issue.
Product # B6B48AV HP ENVY dv6 Notebook PC
Thanks In Advance.
Ratheesh

Hi rvariar,
Welcome to the HP Support Forums, I have you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are getting a 'No Audio Output device installed' and I will be happy to help. This could be cause by an issue during the upgrade. The upgrade process should have automatically created a restore point to go back to Windows 8 and then try upgrading again.
You can try a Hard Reset to see if a clean restart resolves the issue. You can also try Refreshing your Windows and see if that helps at all. Let me know how it goes.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

No Headphones Audio Output T440

Hi,
I have a Lenovo T440 running Microsoft Windows 7.
I cannot get any audio output on my headphones. The speakers work just fine. The headphone are in perfect condition and I have tried them on other audio devices. I have also tried to use other headphones just to be sure my primary headphones i not the issue.
The Realtek Control Panel recognizes the headphones as soon as they are inserted into the headphone jack.
Link to image 1
Headphones is not muted from Mixer.
Link to image 2
I have the latest Realtek Drivers and client control panel installed. I have selected headphones from the Realtek Control panel.
Link to image 3
When I click the play button for the test, I get no audio output.
I have tried to uninstall the sound card from System>Device Manager, reboot, reconfigure the sound card, reboot again and still no audio. Device Driver Infromation is as follow:
Link to image 4
This thing has been going on for quite sometime now for many people but apparently no forum has posted a solution. Would appreciate any help.
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Classic mode should make the headphones option disappear as it autoswitches on attach.
Try a bootable Linux live environment; if it doesn't work there, you might have a damaged headphone jack.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

IPad Music App in IOS 7 is such a crap, When you gonna update it ?

Guys Guys Guys, What happened to you ?
Since the ios7 1st update am Waiting for Music app to be updated. I liked iphone music app, and i thought i could get in my ipad also but sad !
since that day am waiting for music app update. In real words you guys f****d up the MUsic app. you should have make it better than iOS 6 but its such a crap i cant even think of opening it.
There are no any major Pros if you guys compare it with iOS 6 Music app and Cons are First of all App is not Good in Looks Second, there were no need to show album art in Songs List & Third, it could not show Now Playing screen when you tap on album art such as in Itunes desktop app.
Guys if you Cannot update the app then Please give us iOS 6 Music app back.

Agreed!!
The new Music app in iOS7 is horrible. Reduced functionality and the functionality that is there doesn't make intuitive sense.
My main issues/corrections:
1) Give the user an option to display, or not display, the large album art beside the Artist listing. The large album art beside each Artist takes up too much room and conveys no useful information.
2) Within each Artist allow the user to select a listing of the albums (as in iOS6). Scrolling through albums does not make sense. Allow the user to select from a list!
3) Within each Artist allow the user to sort the albums alphabetically. Sort the albums by title NOT date! Why sorting albums by date?
4) Within each Artist replace the selection to play all songs (as in iOS6). In iOS7 only option is to shuffle play the songs.
As it stands now in iOS7 the Music app has reduced functionality and is a horrible experience for the user.

Ipad facetime no audio output since ios7.0.3 update. Was working pre update

Similar Messages

Maybe you are looking for