IPad fails to restore with error 28

I was charging my iPad overnight and the next morning, I see that it has been set in recovery mode. I tried restoring, but iTunes says it can't be done with error 28 (hardware). I bought the iPad in Singapore and I'm living in the Philippines. The Apple stores here do not service iPads. Is there a way to fix this problem on my own? Any similar problems?

HI and welcome to Apple Discussions...
Definitely sounds like a hardware issue.
Try the Apple / Singapore site for contact information and support.
http://www.apple.com/sg/
If you haven't done so, try resetting your iPad. Press and hold both the Sleep/Wake button and the
Home button for at least ten seconds, until the Apple logo appears.
Then try restoring your iPad.
Carolyn

Similar Messages

IPad Fails to Restore after recent update through iTunes

iPad failed the recent update and now fails to restore with a 1014 error code. I tried all of the items listed on the Apple site regarding restoring an iPad. Any ideas?

Have you looked at the three precious threads on this forum that discussed the same error? You can find those by searching the iPad forum for : 1014

Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5

My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
{CE3119AD-35EF-41CF-9C21-C7698FEB8393}   2013-10-14 21:53:00:256-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 4 updates.
{EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1}   2013-10-15 04:15:54:069-0700   1   162   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Download   Download succeeded.
{77DAE88F-2795-4258-8BBF-8D27E53662CF}   2013-10-15 12:10:38:196-0700   1   193   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems (KB2862330)
{1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C}   2013-10-15 12:15:25:676-0700   1   183   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Install   Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
{A220898A-E5FE-4FE7-8413-2B0C7B4013D0}   2013-10-15 12:15:25:766-0700   1   202   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Reboot completed.
{A5400FF2-33ED-4A47-8409-13E5DFE16A6D}   2013-10-15 19:29:31:486-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{43C533EE-775D-445E-A652-06648B72DE65}   2013-10-15 19:29:49:702-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D}   2013-10-15 19:30:05:744-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 3 updates.
{4E73B1C1-5BA2-415D-AB34-92F7AB3DB418}   2013-10-15 19:30:08:753-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{51248882-41AC-4E59-B813-87AD326310AD}   2013-10-15 20:00:05:044-0700   1   183   101   {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6}   501   0   wusa   Success   Content Install   Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
{FB2B8E5E-442C-4E76-B23D-6A41B4324C9D}   2013-10-16 00:11:39:832-0700   1   148   101   {00000000-0000-0000-0000-000000000000}   0   c8000247   AutomaticUpdates   Failure   Software Synchronization   Windows Update Client failed to detect with error 0xc8000247.
Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
(1) Checked Setting, set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
(2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
(3) Ran MS FIXIT
(4) Ran System File checker Scan (sfc /scannow)
(5) Ran CHKDSK /F
(6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
(7) Ran Update for Windows 7 for x64-based Systems (KB971033)
None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
Any help or guidance is appreciated.
Solved!
Go to Solution.

The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
The End!

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.

The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names. This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
for this DNS name exisits in the DNS database. Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
service on this computer is restarted.

Try updating my ipad 2 ,came back with error 1602, and now my ipad is stuck with the itune and usb icon on the screen

Try updating my ipad 2, pop up with error 1602 and now my ipad is stuck with the itune and USB icon on the screen. I tried to restart it, but screen still comes up the same.

See if this page helps http://support.apple.com/kb/TS3694#error1602

HT201413 the iPad cannot be restored unknown error (-1)...no solution?

ipad cannot be restored -1 error pops up while upgrading to ios6 .. & it was not jailbroken, i have only access to Recovery mode and DFU mode,tried so many computers but no solution,status bar on ipad stucks on 60% and then after a hour an error pops up on iTunes 'This iPad cannot be Restored,an unknown error occured (-1) ..i need help please tell me what to do?

ok after so many tries nothing worked so what i did i went to apple store & they said we have no solution...?? now i dont know wt i have to do...

ITunes fails to install with error Ox800736FD. Any ideas?

iTunes fails to install with error Ox800736FD. Any ideas?
Trying to install on a Acer Aspire-- no CD/DVD

Ox800736FD
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?)

ORA-39083: Object type TRIGGER failed to create with error:

i m getting these two error when i import data using impdp.
ORA-39083: Object type TRIGGER failed to create with error:
ORA-00942: table or view does not exist
i have exported (expdp) data from production db, when i importing (impdp) the dump file to the test db i m geting the above two errors.
example:
ORA-39083: Object type TRIGGER failed to create with error:
ORA-00942: table or view does not exist
Failing sql is:
CREATE TRIGGER "NEEDLE"."CC_BCK_TRG" BEFORE INSERT OR UPDATE
ON NIIL.cc_bck_mgmt REFERENCING NEW AS NEW OLD AS OLD FOR EACH ROW
DECLARE
w_date DATE;
w_user VARCHAR2(10);
BEGIN
SELECT USER,SYSDATE INTO w_user,w_date FROM DUAL;
IF INSERTING THEN
:NEW.cretuser :=w_user;
:NEW.cretdate :=w_date;
END IF;
IF UPDATING THEN
:NEW.modiuser :=w_user;
:NEW.modidate :=w_date;
END IF;
END;
status of the above trigger in pro db is valid. and source table also exist even though i m getting error when i import
please suggest me...

perhaps you don't have table... (impdp created trigger before create table)
check about "NIIL.cc_bck_mgmt" table.
and then create it (trigger) manual ;)
Good Luck.

3GS froze, then said Activation required, now fails to restore with unknown error (1)

My 3GS froze while using Navigon, then showing a pop-up saying "Activation required". When tapping the pop-up, an unusual white question box regarding location service shows up, after tapping "next" the process hangs. Connected to iTunes later, same procedure again, hangs again. When trying restore with iTunes, the whole load process looks ok, but at the end fails with "unknown error (1)", probably when trying to rstart the phone. I tried all variations (restore mode, DFU mode, hard reset) but no luck. The phone was recently officially unlocked (AT&T), could this be a factor? Or is this a harware problem? Any ideas aor hints welcome.
Thanks,
Manfred

Thanks for the pointer to the KB article. Error 1 is missing from the list provided by iTunes (more information), but I was afraid it means hardware. Will try on another computer, but I'm afraid the phone is sick.
Thanks,
Manfred

IPad cannot be restored unknown error 1; I tried to update my iPad 1 to new os5 by syncing to new version of iTunes and found a message that my iPad needs to be restored. I tried several times and continue to get same error code unknown 1; how to fix?

When trying to sync my ipad to latest version of itunes, it appears the ipad identity was lost and a message in itunes says to restore the ipad. However, multiple attempts to do this continue to provide the "This ipad cannot be restored. Unknown error 1" I have tried resetting my ipad which just brings back the screen to connect it to itunes. I have updated all software on my computer and restarted. No luck!. Please help!!

Thank goodness for this thread!
I installed iOS5 last night and was having the same problems described above with my iPad 1 32 GB + 3G. Unknown Error (1) and was unable to restore.
I took my ipad to the local Apple Store today and was told by the genius that it was a hardware issue, and because the warranty had expired, there was nothing the Store could do. He suggested that I try calling AppleCare. Then I asked to speak with a manager. He apologized again and said there was just nothing the Store could do. I was close to leaving, when I asked a second time if it would be possible to see a Manager.
After asking a second time, he called a manager. After explaining my issue to her, she immediately authorized him to give me a new iPad ! Anyone with this problem should definitely go to the store and be polite but adamant. You should get a new iPad.

Messages fail in PI with error "Message ID already exists in database"

Hi Guru's,
The scenario is from FILE->PI->MDM .
Few messages fail in PI with the error Message ID 415a6324-dd3d-11e3-94e0-00000613e84e already exists in database .
I have already seen the SAP NOTE : 1361305 , My doubt is if this error is any way related to MDM side issue or anything else.
Please help me out .
Attached the full trace in PI :
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: Message ID 415a6324-dd3d-11e3-94e0-00000613e84e already exists in database: com.sap.sql.exception.OpenSQLIntegrityConstraintViolationException: ORA-00001: unique constraint (SAPSR3DB.I_XI_ID_MAP_ID1) violated OpenSQLExceptionCategories: [NON_TRANSIENT, INTEGRITY_CONSTRAINT_VIOLATION]

Hi Gowtham,
Can you check once whether message gets failed after it is automatically restarted.
Check traces for each defined pipeline.
I think, at first message got failed due to some reason (i forgot the reason for my case) and when it automatically restart it fails saying message id already exist. Check the root cause why it failed for the first time.
Also check with basis team on tablespace issue.
Regards
Jitender

DBcheck get failed from db13 with error BR0301E SQL error -1031

Hi,
I am executing DBcheck from db13 but it gets failed with error "BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement".
Here is the job logs:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000424, user ID SVKM_BASIS2)
Execute logical command BRCONNECT On host svkmeccdbci
Parameters: -u / -jid CHECK20110930103211 -c -f check
BR0801I BRCONNECT 7.00 (40)
BR0477I Oracle pfile /oracle/SEP/102_64/dbs/initSEP.ora created from spfile /oracle/SEP/102_64/dbs/spfileSEP.ora
BR0805I Start of BRCONNECT processing: cegwudvg.chk 2011-09-30 10.32.12
BR0484I BRCONNECT log file: /oracle/SEP/sapcheck/cegwudvg.chk
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.12
BR0813I Schema owners found in database SEP:
DBSNMP, DIP, OPS$ORASEP, OPS$SAPSERVICESEP, OPS$SEPADM, ORACLE_OCM, OUTLN, SAPSR3*, SYS, SYSTEM,
TSMSYS
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.20
BR0814I Number of tables in schema of owner SAPSR3: 77207
BR0836I Number of info cube tables found for owner SAPSR3: 49
BR0814I Number of tables/partitions in schema of owner SYS: 625/189
BR0814I Number of tables/partitions in schema of owner SYSTEM: 134/27
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.29
BR0815I Number of indexes in schema of owner SAPSR3: 92099
BR0815I Number of indexes/partitions in schema ofowner SYS: 678/199
BR0815I Number of indexes/partitions in schema ofowner SYSTEM: 175/32
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
BR0816I Number of segments in schema of owner DBSNMP: 25
BR0816I Number of segments in schema of owner OPS$SEPADM: 1
BR0816I Number of segments in schema of owner OUTLN: 9
BR0816I Number of segments/LOBs in schema of owner SAPSR3: 174072/2383
BR0816I Number of segments/LOBs in schema of owner SYS: 1838/87
BR0816I Number of segments/LOBs in schema of owner SYSTEM: 353/22
BR0816I Number of segments in schema of owner TSMSYS: 4
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
BR0961I Number of conditions found in DBCHECKORA:118
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement:
'PREPARE stmt_5 STATEMENT FROM'
'SELECT OBJNAME FROM "SAPSR3".DBDIFF WHERE DBSYS IN ('ORACLE', ' ') AND OBJTYPE = 'TABL' AND DIFFKIND IN ('02', '61', '99') ORDE
ORA-01031: insufficient privileges
BR0806I End of BRCONNECT processing: cegwudvg.chk2011-09-30 10.32.52
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Please help.
Thanks in advanced.
Ocean

Dear,
Thanks for the reply.
I have checked the note you have mention, but it show it is for SAP Release 6.20 or lower.
we have ECC6 EHP4 release 700.
So, please advise, should i go for that note and perform the required action ?
Thanks.

Exchange 2013 : OWA failing after login with error "HTTPS 400"

Greetings,
I am in phase of Upgrading my existing Exchange 2007 Infra to Exchange 2013.
The environment is as mentioned below:
4 Mailbox Server (DAG)
4 CAS Servers (NLB)
Everything has been configured and working properly, except Only one CAS server is able to pass the login request
https://servername/owa
Rest of all the CAS servers are failing with error "HTTPS 400" while accessing OWA
https://localhost/owa
Its happening only while accessing OWA, ECP works fine.
Please let me know the fix to counter this strange issue.
Thanks in advance.
Regards

Hi,
Please check if IIS log is enabled on the CAS server, if not, please enable it.
Then check the detailed error code from IIS logs (Path: inetpub\logs\Logfiles\W3SVC1 ) , some code like 400.1, 400.2 ect.
Refer to this KB for more details
http://support.microsoft.com/kb/943891
After that, please post the OWA related login entry with error code shows 400.
Thanks for your time and patience.
Meanwhile, please check the OWA authentication method by command
Get-OWAVirtualDirectory –Server “Ex2013 CAS server” | fl *authentication*
We should set the authentication as the below:
Get-OWAvirtualdirectory -Server “Ex2013_CAS_server” | set-OWAvirtualdirectory -windowsAuthentication $False -BasicAuthentication $True -FormsAuthentication $True
Then perform iisreset and try to access OWA again.
Best Regards.

EMac wont install OSX, fails on install with errors every time

I have a 1.25GHz emac that I just recently got, Well it wouldnt boot at first at all and had the Rom password crap on it. So i got rid of all of that and now it boots from the CD just fine it just wont install OSX im using a Retail Black disc for Tiger and it just wont get past a certain spot in the install and fails with errors every time. Any suggestions? Ive tried to install panther & Jaguar and neither of those discs will boot.
Thanx
Jeremy

Sometimes, the OSX installer wants a clean partition. As the computer is new to you and probably has no files on the drive you need, I suggest you wipe the drive before trying again. Boot from the install CD and choose "Open Disk Utility" from the installer's File menu. Use DU to erase and reformat the disk, choosing "Mac Extended (Journaled)" format.
This will clear any old files that are interfering with the installer and leave a blank slate.

Activation of data fails in ods with error 9

I am running the a process chain and during the process, activation of data in ODS fails with error 9.
any suggestions to correct the issue?

Hi,
open the Process Chain if the load is through PC.
right click on the failed task and click repeat.
in the pop-up window leave the seconds field blank and click continue
you can find the activation has started again.
this muct help resolve your issue.

IPad fails to restore with error 28

Similar Messages

Maybe you are looking for