IPad first gen not turning on!

Hello, please help me!! My iPad first gen isn't turning on!! It's just a black screen. Tried resetting it and tried dfu mode but nothing!! When I plug it in to charge then the screen keeps flashing on and off, no apple logo just a black screen lighting up and switching off immediately and looping again. When I plug it out of charge then its completely unresponsive!! Not even lighting up!! Tried whacking it near the headphone jack but still not working... Is there a problem with the battery? Or the screen. I've never dropped it ever.  Itunes doesn't recognise it at all. Do I have to replace the battery or something? I really need help so please help me!! I'm going crazy!!
thank you soo much

I went to to apple to fix it and they said it's the batteries problem so they did something and now instead of a black screen it has an apple logo!! It's progress!! But they said the battery is gone bad so I have to change it but apple is not allowed to do that so I'm guessing I have to do it myself... Oh well, thank you for your help!!

Similar Messages

  • IPad (first gen) wont turn on

    Hi. I got an 32 gb wifi only ipad (1st gen) recently. I had taken really, really good care of it and never dropped it or got it wet or anything. Yesterday I set it down for about 20 minutes. When I came back it had turned off and would not turn back on when I pressed the power button. After a quick search on the internet I found something that said holding home + power for 10 seconds would do the trick. I did that and the iPad turned back on and all my stuff was still on it.
    Does anybody know what causes this or how I can prevent it from happening again? Is this a normal thing or should I get a new iPad? And what did holding the two buttons like that actually do? I researched a bit online and I cant seem to figure it out. Any help is greatly appreciated
    Message was edited by: Jman117

    Jman117 wrote:
    I wonder if its actually bad for the device to reboot it like that.. Anybody else know the cause, or if this is actually a bad thing?
    Apple recommends this particular fix if the iPad does not respond, turn on, goes a little haywire. It's merely rebooting the device and clearing the memory. It's not a problem at all unless you have to resort to the "hard reset" as it is called on a daily basis in order to get it to work properly. If you have to do it every day, then there probably is an underlying problem.
    IMHO - with all the hype about the incredible battery life, I think users don't turn their iPads off on a regular basis and they just let their devices go to sleep and then use it maybe for several days, until it needs a charge. They plug in the charger, let it sleep, get back up to full charge and start the whole cycle again.
    Rebooting every few days - again - IMHO - is a good idea.
    Message was edited by: Demo

  • ICloud Synchronization not working between iPad first gen 5.1.1 & iPhone 4S 6.0.1?

    iCloud Synchronization not working between iPad first gen 5.1.1 & iPhone 4S 6.0.1?

    I can see the acknowledgement that this issue will be fixed in the 'next' software update. Considering the original post was for an iPad 2 running 5.0.1, I am not sure if this issue on iOS 5.1 which runs on my new iPad (4G) is considered fixed. As I reported in my previous post it is impossible to update individual tracks. I also tried adding entire collection to a single playlist, shuffling the playlist. While shuffle is in progress, turning to the 'list' view that allows tracks to be rated does who the currently shuffled playlist and the currently playing track and assigns the rating to the track correctly. However, as soon as the second track plays, switching to list view (which displays the ratings) lists only the tracks from the currently playing track's album. Which is insane IMHO.
    So, was this not fixed with 5.1 update? Or the iOS 5.1 will get it's own piece of update on this?

  • IPad first gen Calendar will not show month view for March. When you go feb to march the pad goes back to the home screen. Apr etc are all there. March seems to have some problem always going to the home screen. How can I fix this

    I am haveing trouble with the calandar view on an iPad first gen. the month of March will not display , no matter how it is asked for the device drops out of calandar and defaults to the home screen. all other months display. Any fix suggestions welcome.

    Try removing any all-day events from the calendar for the 1st April 2013 e.g. if you are syncing the calendar from somewhere else (e.g. Outlook on a PC or iCal/Calendar on a Mac) then change it to a timed event instead of all-day (if you don't sync your calendar from anywhere then try going into list view, go to 1st April and change any 'all day' events to times e.g. change Easter Monday to start at something like 4am) - it seems that there is a problem with all day events on that date which is when the clocks change due to daylight saving on the day before.

  • Hello. I dropped my ipad first gen from my chair, about 2 feet above the floor. The screen went black and I can't turn it on again. I have tried holding both buttons down at the same time, but nothing happens. Any help?

    Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?

    You will probably have to contact Apple for repair but before you do try this:
    Turn your iPad upside down on your lap and give it a hard smack on the back.

  • IPad first gen 3g, battery died, wont start

    I have been happily using my iPad first gen since i got it when the iPad 3g launched. Every night i would put it on the charger, but recently i went back vacation and didnt charge it for a week. When i got home my iPad was dead, so i placed it on the charger. It shows the charger connecting, the symbol on the face turns to the lightning bolt with a flashing red empty battery. After sitting like this for four hours, it still refuses to boot up. This is the exact same charger i have used for years, and i have tried pressing the home and lock button to force a restart (after about 6 seconds it just turns off). No idea whats wrong, hoping he isnt dead because i cannot afford a new one =(

    Check that your cable is in good working order and that you are using the appropriate charger. The iPad required a 10W charger, not the 5W that comes with an iPhone. Most other third-party chargers not SPECIFICALLY stated to be for iPad will charge, but very slowly.
    Also, you should;t let the battery drain completely before charging it. You can do that maybe once per month, but repeatedly doing this is not good for Li-ion batteries. Follow Apple's recommendations for battery care and you should be ok. https://www.apple.com/batteries/ipad.html

  • IPad 1st gen not syncing with pc windows desktop

    IPad 1st gen not syncing with pc windows desktop

    Try disabling a/v software and turn off the Firewall.
    Disable antivirus software
    Turn Windows Firewall on or off
    iOS: Device not recognized in iTunes for Windows

  • My iPad (first gen) crashes each time I put it in the keyboard dock

    My iPad (first gen) crashes each time I put it in the keyboard dock. When I put it in, it freezes and I need to do a reset..

    It's not possible to say, it depends on how much of that data changes between back ups.
    The first time it will use up 6 GB, if you have changed say 500 KB when you next back up, then you'll use 500 KB.

  • TS1559 hello guys i wanted to ask u about my ipad wifi is not turning on and i have tried to reset the network but still is not working please i need ur help

    hello guys i wanted to ask u about my ipad wifi is not turning on and i have tried to reset the network but still is not working please i need ur help

    Thank you. I will try your tip. And if it works, I'll give you 10 points . But now its been charging for hours and its still the same . But thank you!

  • What do I do when iPad 3 does not turn off?

    What do I do when my iPad 3 does not turn off?

    Try a device reset:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • My home button stopped working and now iPad mini will not turn.

    My home button stopped working a few weeks ago, and now my iPad mini will not turn on. I can't restart the iPad, and it will not pop up in iTunes. What can I do?

    Make an appointment with the nearest apple store and they will be able to replace it or give you directions otherwise. Hope this helps
    -24GHz

  • Ipad 3 will not turn on

    Ipad 4G will not turn on
    dark screen no reaction from pressing any button

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??

    My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??

    i plugged it and pressed the home button for a few seconds. the connect to itunes screen appeared and the moment i disconnect the cable from the electric plug, it switches off. when i connect the cable to the PC, nothing happens, its as if nothing has been done.

  • I have a iPad first gen but can't doe a software update off my computer can I do it wirelessly and unlike my other apple products in settings there is no software update botton

    I have a iPad first gen but can't doe a software update off my computer can I do it wirelessly and unlike my other apple products in settings there is no software update botton

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • My ipad air is not turning on, when I plug it in it doesnt even show that is charging and I tried several chargers they all work fine, its just when off and pitch black help!!!

    my ipad air is not turning on, when I plug it in it doesn't even show that is charging and I tried several chargers they all work fine, its just when off and pitch black help!!!

    If the battery is very low, it can take 15 minutes or maybe even longer befor you will see any response at all on the screen. If you have let the iPad charge for what you think is a sufficient length of time and it still hasn't shown any signs of life, try a reset and see if that will force it to start up.
    Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo apperas on the screen and then let go of the buttons. If that still doesn't work, try charging the device again overnight. If it's still dean in the morning, try restoring the device with iTunes.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If that doesn't work, make an appointment at an Apple Store and seek their guidance.

Maybe you are looking for

  • 3G phone discharges when computer shuts down?

    I have a 3G iPhone that is synched with my desktop G5 system. I use the supplied cable that's plugged into the front panel of the G5. When the G5 shuts down for the night the iPhone, which had been charged completely at that time, is about 2/3rds cha

  • Doubt about  doFaultRecovery() of IActivityHandle

    Hello I have to automate the process of continuing the activities through java code.I am very new to BPEL.Can someone tell me how to give tha parameter for continuing the activity just like how we abort and retry.

  • How does the RoboEngine Search Function Work?

    When I perform a keyword search via the RoboEngine, the results include .doc, .xls, .pdf files. I thought the RoboEngine performed a keyword search through the HTML pages. Was I wrong in that assumption? Thxs.

  • Network printing?? 2 questions for m1217 mf printer

    I have new m1217 mf printer. on hp desktop with Win7 Ultimate, using ethernet as printer will not do both ethernet and Wi-Fi at same time. I got it because it has both ethernet and WiFi. I won't go there about support telling me it will do both, just

  • Cant get update to work on 3.6.8.

    I have gust upgraded my old imac os power pc to current 10.8.2 and cant get foxfire to update. set on auto update nothing happens