IPad Folio Overlay Preview Only Displays One Orientation at a Time

I have a simple two page InDesign doc created from the ground up for DPS. It has some text, image, slider overlay, and video embedded, and has a file_v vertical (portrait) layout and file_h horizontal (landscape) layout.
My problem is when I preview it on a connected iPad, only one orientation is previewed at a time. I double checked my iPad, its orientation is not "locked". I also tried on another iPad and had the same results. For example, only the portrait version is previewed on the iPad no matter how I try and change the iPad orientation. In order to preview the landscape version, I need to go back to my doc, scroll down to the page where the file_h version starts, and hit folio preview from there.
If I preview on desktop, the Adobe Viewer correctly shows both layout orientations and I can switch between them.
I only had this problem after recently renaming the doc. I tested an older version of the doc, and had this same problem.
My question is: might there be a setting or preference somewhere to lock an iPad preview to only one orientatation? I'd really like to get the function back to preview both orientations at the same time to see how they compare.

Thanks Bob, that was it!
I was indeed using the folio overlay vs the folio builder.
From the folio builder panel, I setup a quick test folio and added my current doc, then from the top level folio builder panel, hit the twirly-down for preview on iPad.

Similar Messages

Force oraclexe to only display one page at all times

<pre>Hallo everyone. In oracleXE,when logged in , if you have the same page open in two or more browser windows . the pages change session state.
This is normal behaviour but for my requirements this could be dangerous (a user thinking he has submitted some information when actually he has submitted the information set in session state by the other page).
How can you restrict/force OracleXE to show only one page at all times?.
Or, how can you restrict Oraclxe so that certain pages can be shown in only one browser window at a time</pre>

Hallo Dietmar,
The page that i use,uses a view with instead of triggers to update the underlying tables.
I do use dml for updating the view, but I use an application item to store the
number of the current form accessed. ( a form that is used in the process that i
have to automate) .
If two browser windows are open and the application item is changed, it will be set
to the value in the window that updated the item last.
When i open the first browser window and save the form, the value of the
application item used will be the value set by the window that updated the form
last.
How can I make it possible for a user to open two browser windows in one
session, without this problem, or if that isn't possible, how can i restrict the user
from opening more than one application page in the same session?
[pre]

Since the os7 update on my iPad, my safari is not right, it only opens one page at a time, crashes when trying to open more, it has no back button. Help

Since the os7 update on my iPad, my safari is not right, it only opens one page at a time, crashes when trying to open more, it has no back button. Help

Well, I rebuilt the entire workbook... that was a few months ago and so far, the problem hasn't resurfaced. It really wasn't fun to do, but whatever glitch there was in the file, I eliminated it.
I think I should mention that I am using Office v.X, NOT Office 2004. I got a new Intel iMac this week and yesterday when I opened up my files, it opened up the test drive (a JOKE of a program if you ask me) Anyway, some of the very minor issues I had with Office v.X were solved in the 2004 version. (When opening up large multi worksheet files without Excel being already opened, the tabs have white text) Anyway, I am still going to wait for the universal version to come out, but it seems that the newer versions may have fewer glitches (as is to be expected)
At any rate, best of luck to you!

I want to play music from my playlist when I am using slideshow of my pictures in Ipad, but I can only choose ONE SINGLE song, and it continuously repeates itself. Is there a way to play the complete playlist while showing my pictures?

I want to play music from my playlist when I am using slideshow of my pictures in Ipad, but I can only choose ONE SINGLE song, and it continuously repeates itself. Is there a way to play the complete playlist while showing my pictures?

You can start the playlist playing in the iPod app and then switch into the Photos app and start your (non-music) slideshow - as you've found out you can currently only select a single track in the Photos app. Whether that will change in iOS 5 I don't know, but you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

My Itunes will load on Apple TV and play, but only plays one song at a time. It will not shuffle or continuously play an album. All of the songs display, but will only play one at a time...home sharing is on. Any suggestions?

My Itunes info will load onto Apple TV, but will only play one song at a time of my music. Home sharing is on, airplay is on, router info has been reset. What am I missing? It has never done this before....

My Itunes info will load onto Apple TV, but will only play one song at a time of my music. Home sharing is on, airplay is on, router info has been reset. What am I missing? It has never done this before....

Transfer purchases only transfers one app at a time

I'm trying to back up my iPad in preparation for installing the new iOS, I'm transferring purchases first, but iTunes only transfers one app each time I click transfer purchases! This never used to happen, any idea how to stop it doing this, how do I transfer all the apps at once?
Also, when I sync my iPad or iPhone, iTunes frequently moves the apps around on the screen of the iPhone/iPad, taking them out of folders etc, and re-installs ones I've deleted from the iPhone/iPad. How do I get it to stop doing this? I just want it to back up whatever is on the iPhone/iPad, not change it in any way.

My iPhone4 and iPad2 are both doing this same thing (only transferring one app at a time). It is really frustrating because I purchase a lot of apps from my phone or ipad and it takes forever to keep clicking 'transfer purchases' over and over again for each individual app every time that I sync or update. It would be great if someone could figure out how I could enable it so that all of the apps transfer to the computer at once.
Regarding the second part of your post, I've had that same problem before. When doing a sync, after backing up my iPhone/iPad, the apps are updated, and when the screen comes back all or most of the folders are missing and I have more apps than can fit in the display. Or sometimes it happens after upgrading the software or restoring it. After reading other posts about the same thing, I've found that doing a restore from your latest backup will usually restore all of your folders, too. The trick is that you might have to do the restore twice. Try to restore your phone from a backup and when it comes back, if the folders are still missing, do the restore one more time. I don't know why doing it the second time works, but it has worked for me on 3 separate occasions when nothing else would. I know that it is a pain to have to waste the time of doing an entire restore (especially if you have to do it twice), but it is less work than having to remember and recreate your folders from scratch.
Message was edited by: bigdaddylongluv
Message was edited by: bigdaddylongluv

My Viewing area only shows one photo at a time now :(

Yesterday I noticed that my viewing area only shows one photo at a time. It used to display thumbnails of all the photos in the selected event - or library. Now, I'm forced to scroll down and view them one at a time or go into edit mode to see some thumbnails across the top of the screen.
Did I accidently do this? Was it part of an OS update? (I've been away for a month and just don't think I did anything to cause a change...) Can anyone tell me how to view all the thumbnails in the viewing area again?
I'm using iphoto 08 version 7.1.5 (378)
I would very much appreciate some help with this.

Thank you so much!! I love simple answers. I actually spent a few hours on this - seemed to play and test all the settings - and I just didn't understand this application of that slider.
Thank you again.
I'm very happy.

Displaying one page at a time in a form

I have a bunch of different single-page forms for people to fill out but they only will be filling out one of them at a time. I want to create one pdf document that contains all the different forms available (about 50 different pages) but only displays one of them at a time. I was wondering if there was a way to have someone chose what form they wanted to fill out when they opened the pdf and then only allow them to view that one page. Any thoughts on how to do this would be a great help!

Thanks for the help so far. I think the solution that I am going to try to go with is creating a file that has all the forms in it and setting it so that all the visibility is off for all layers and fields when it opens. A pop up comes up and prompts the user to chose several options which are necessary to determine the form they should fill out. Then I will extract that page from the main document into a new pdf and turn on the visibility of that page. I've read conflicting things online about extracting a page to create a new pdf. If I don't specify a path to save the new pdf to will it just allow the user to save it on their own or will this solution not work?

When I print from my pad it only print one page at a time, why?

Why can I only print one page at the time when using the iPad?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

Power View can only print one sheet at a time with Power BI Mobile Apps

I have PowerView for Excel 2013 on Power BI Preview. I have 2 reports sheet and 2 hidden data sheets on Excel.
I'm getting error on Mobile Application in Windows 8 RT tablet.
I should see 4 reports in preview page, but I see 2 correct reports and 2 errors.
Power View can only print one sheet at a time. Please switch to the desired sheet and try again.
Why this occurs? What should done in Excel?
Kenny_I

Thank you for reporting this issue. This is a known issue that we had fixed last week. In a few days, the updated version of the app will be available in the Windows store. At that time, your app should automatically get updated to the newest version, if
you have not changed your default settings.
If you still experience issues next week this time, please post back and perhaps share your workbook, so we can do a thorough investigation.
Thank you.

My iPod only plays one song at a time

I don't store any music on my iPod - only music videos. They all play fine, and they're stored as properly tagged music video files under Menu->Videos->Music Videos. After I first synced them from my PC, I noticed that they also all appear under Menu->Music as songs. I can play them all just fine, either by selecting one through Menu->Videos (in which case it plays as a video) or by selecting one though Menu->Music, in which case it plays as a regular song with a little picture displayed instead of the video.
So far, so good.
The only problem is, I can only play one song at a time. I navigate through the menu, select either a song or a video, and the iPod will play that just fine, get to the end, and then bring up the menu again.
How can I get it to play the one I select, and then just play other random songs? It makes no difference whether or not 'shuffle' is selected, it still only plays one then stops. Also, putting the songs in a playlist doesn't seem to make any difference.
Any advice gratefully received.

Are you sure you don't have Shuffle on? There are a couple of ways to Shuffle on a 5th Gen. iPod. You can't simply choose Shuffle Songs from the Main Menu and shuffle the entire library...or you can go to Settings > Shuffle and choose Songs or Albums and apply that to any playlist you select. The behavior you describe is what happens when Shuffle is turned on and items are set to Skip When Shuffling (an option found on the tracks under Get Info). If Shuffle is on, you should see the little green crossed arrows in the upper right of the iPod window.

Displaying one record at a time

Is any body able to help me? I need to display one record at a time from a Select statement.
Could I copy the results of the Select query from a table into an array for later display or is there a better alternative.
Please, any part knowledge with regard to the above would be usefull.
Regards
Eddie

What application do you want to use to display the data?
You can use "rownum" in your SQL statement to ensure that you only get record N of a query. Asktom has a good article on this sort of windowing
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:127412348064
More commonly, however, you'll write a SQL query that returns all the rows, fetch a small number, display those to the user, and then fetch more records.
Justin

Can only print one item at a time

Hey everyone,
Bit of a Photoshop novice here, use it for DVD covers and labels. I have been using CS3 previously but upgraded to CS5.5 last year. The thing is on CS5.5 I can only print one page at a time even when I input say 20 copies to be printed, only one will print. That goes for the regular printer for printing covers and the disc printer.
I can open CS3 up and right away it will print however many I ask it to.
Is there something I am missing? Something so painfully obvious that it is staring me in the face but I am just not seeing it?
Thanks in advance!

It isn't a printer setting. I have 3 different printers connected to my system and all of them worked with CS3 fine. And when I delete the preferences folder for CS5.1 it works as it should but only once, then afterwards it only prints one copy, no matter how many I ask it to print!
So if it works when the preferences have been removed, then fails to work afterwards, how can that be a printer setting?
I have read elsewhere that others have had similar issues with CS5 and Windows 7.

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5. Can this be overcome?

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

You can use printPages(1, 5), however I need to know how you print current page.

IPad Folio Overlay Preview Only Displays One Orientation at a Time

Similar Messages

Maybe you are looking for