Ipad froze after trying to upgrade to ios 8
good day, I tried to update my ipad mini to ios 8, it started the process and then froze on a black screen w/the apple logo, any suggestions ? thank you
Try to reset it
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Similar Messages
-
IPad locked after trying to upgrade to IOs 8
Have iPad 2 and tried to update OS fro 6.x to 8.x through iTunes. Downloaded fine and began to install. Asked for passcode for iPad which I put in. Grey screen came up with Apple icon and progress bar. Progress went to about 95% and a box came up saying iTunes could not connect to iPad because needed passcode. Only options were more info, cancel or try again. There was no place to put in a pass code again. Tried "try again" but nothing happened. Now, the same screen is up with apple icon and progress bar at 95% but I can't do anything. Tried shutting off iPad but even after holding on/off button for 5 minutes, nothing other then the grey screen with progress bar. Looked up this issue and all "fixes" begin with shutting down the iPad, which I cannot do. Need help ASAP as battery on iPad will drain. As of now, iPad unusable. Thanks.
Update to above: was able to finally shut iPad off by pressing both the home button and the on/off button together. When I then push the on/off button for a few seconds, the black screen with the Apple icon comes up followed by a blank screen with "slide to upgrade" at the bottom of the screen. When I "slide" that, the next screen is number pad to put in the password. When I do that, the grey screen with the Apple icon and the progress bar comes up and the progress bar moves to about 95% whether the iPad is connected to my iTunes or not. If connected to my iTunes, I get the same box saying "iTunes could not connect to the iPad “D’s iPad” because it is locked with a passcode. You must enter your passcode on the iPad before it can be used with iTunes." It gives three options again: More Info, Cancel, Try again. If I hit try again, the box disappears and comes up again. Is there any way to remove the passcode at this time. After this problem, I tried upgrading my wife's iPad, but turned off the passcode first. Everything went fine. Seems the passcode is the issue or???. Anyone have any helpful ideas?? Thanks
-
Ipad2 froze after trying to upgrade to ios6, how can i get it to come back on?
ipad2 froze after trying to upgrade to ios6, , have a black blank screen. how can i get it to come back on?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
HT4972 my phone went frozen mode after trying to upgrade for iOS
My iphone went wird when i was trying to upgrade for iOS. It doesn't turn on or off and it doesn't do anything else besides flashing the apple logo on and off continuaslly. What can I do to fix this?
iOS: Unable to update or restore
FYI, you can't have iOS 6.1.4 whichi is for the iPhone 5 only. -
I lost all of my information after trying to upgrade to iOS 5
Hello.
i have ipod touch 4th gen, 32 GB.
just tried upgrading to iOS 5.
first had issues with downloading. finally managed to download.
now i does not let me restore my information after installing iOS 5.
first it tells me "10 minutes remaining". then the time goes up and up. after it reaches 10 hours, error messege pops "iTunes could not restore because backup could not be saved on this computer":
http://i.imgur.com/FLLd0.png
same thing happens when i restore to default, and then try to restore again from my backup.
i am frastrated. i have a serious headache. 5 hours of trying to upgrade. i really want to CRY (really).
i REALLY need ALL of my information. including contacts, calendar and internal information of application i bought (like 2Do, awesome note etc.). i can not afford myself losing all of this information. i have no other backup. this information worth more then 5k $ to me.
what can i do? i need HELP.
only thing it let me restore is my music.Try moving the existing backup file to a safe location so that iTunes has to create an entire new file. If you get a successfull backup you can delete the moved backup. The backup is located:
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista, Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory. -
My ipad froze after a failed upgrade to IOS6.
I was trying to upgrade my iPad 3 to IOS6 via iTunes, and it failed and has frozen my iPad.
It has the iTunes screen with a USB cord, but my iTunes doesn't recognize it. I've tried restarting both iPad & the PC, but nothing seems to unfreeze the iPad.
Any suggestions???
Thanks,
AlisaSee Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
i have tried to update my ipad 2 in ios 6 and since then is stucked in recovery mode and i tunes cant restore it as i receive a message about device not being eligible for the requested build
helpDo you have to restore your iPhone again? You could try uninstalling and reinstalling iTunes. You could also try checking out this link.
http://www.ipadforums.net/jailbreaking-hacking-tutorials-how-guides/28716-how-re solve-itunes-unknown-error-3194-a.html -
Can't restore after trying to upgrade to iOS 4.0.1
I tried installing the 4.0.1 update but it stopped downloading when the bar was about 70% full. Eventually I decided to disconnect the phone, knowing that I would have to restore. However, while trying to restore, it stopped again at about 70% full.
I have updated to the newest iTunes
I restarted my computer
I changed the USB cord
But nothing happens. All it says is "restoring iPhone software", yet it has completely stopped syncingError 14 is not a USB problem, but a CRC problem of OS image.
Image is corrupted.
Delete it (.ipsw) and it will worked well -
Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6
Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!
Restore ur iPad to iOS 5 or 6( if u have downloaded)
<edited by host>
Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
Then set up your iPad as a new iPad .
Here you go, Now your iPad will be perfectly fine.. -
After the recent upgrade to ios 8 ipad air has no audio coming out
HI
After the recent upgrade to ios 8 ipad air has no audio coming outI had the same problem until tonight. Played with ring tones, do not disturb, volume, and everything else posted. What I found is that when you go to sounds/text tone, there are two types of tones in the scrolling menu. The top set of tones are for alert tones and the bottom set are ringtones. They are separated by a gray bar that states their purpose. Many of the tones are the same name. You need to set your text alert in the Ringtones and reminders, alarms, and such in alerts. The weird thing about this menu is when you go to sounds/ringtone the menu is reversed. Mine works in locked mode or unlocked now. I have an Iphone 6 8.1.2. My problem started after my latest OS upgrade. Hope this helps.
-
I have an ipad 2, MC769x it is running 4.3.3 (8j2) i have been trying to upgrade to ios 5 or higher but a) I don't have a software update option on my Settings / General screen. And b) when I go into itunes I don't get tihe options suggested on the forums. I really want to upgrade my ipad as I want to buy and install some apps that are only available from ios5 onwards. I have been a big apple fan but I am now wondering if my ipad2 was a mistake.
If your are using IOS 4, see below.
http://support.apple.com/kb/HT4972 -
When I am trying to upgrade my iOS version I am getting an error message saying " the iPad software update server could not be contacted", I also get an error message prior to that which says the certification of the server is invalid?
Temporarily disable any security software on the computer and try again.
-
After trying to update to iOS 7, my iPhone 4 says connect to iTunes, which I've done 4 times. It keeps saying restore and upgrade but won't do it. Help!,,,,
Hi there,
You may find the troubleshooting steps in the article below helpful.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
When trying to upgrade to iOS 6 after a few minutes message pops up: unable to complete download, options cancel or settings? what do I need to change in the settings? What have I set in settings that is stopping my upgrade??
Sorry, good network connection, happily downloaded for 15 minutes before this popup appeared... Staying with iOS 5.1.1 for now hoping Apple can sort it..oO
-
Error message after trying to upgrade iOS 6, Error message after trying to upgrade iOS 6
I tried to upgrade to IOS 6 on my ipad2 and get an error message. It won't let me try to download again. What do I do to download iOS 6?
I tried to upgrade to IOS 6 on my ipad2 and get an error message. It won't let me try to download again. What do I do to download iOS 6?
Maybe you are looking for
-
How to catch exception when have max connection pool
hi, i have define in oracle user that i could have max 10 sessions at the same time. I have jdbc datasource & connection pool defined at glassfish server(JSF application). now, if in application is too many queries to the database then i have error:
-
Newbie question :- An IN statement question
I have the following issue. I want to use an IN statement (As below), This will enable the user to enter upto 5 serial numbers. select col.contract, col.order_no, col.customer_no, ci.name Customer_Name, odn.ship_address1, odn.ship_address2, odn.ship_
-
Deploying a track to another server
We are using NWDI and we are in the middle of development. We have successfully setup the runtime systems such as dev and consolidation systems. Everthing is working fine. Now we have a request to demo this application from a different server other t
-
Hello, I have a 3GS but I cannot either make calls or receive them but I can send messages, could anyone help me, pleaseeeee? I do not know what to do. Many thanks.
-
Unable to login. Facebook not recognized.
I cannot log in through facebook. Which I have been able to for the past 2 months. Then suddenly I can't, and when trying to reset my password it doesn't recognize the email address I have been using. I sent a question two days ago with the same prob