Ipad froze during ios6 update
My ipad 2 froze during ios6 update. it is over two hours since it started the update.
Does anyone know how to do a hard reset or something similar?
pressing and holding the power button does not do anything.
Thanks
You may have to try the above proceedure More than Once...
Some Users have reported that as many as 7 attempts were tried before success...
Also, if the Device has been Modified, this will Not necessary work...
Similar Messages
-
My new IPAD froze during software update thru itunes on my winows PC. The normal reset instructions holding the home and power buttons do not work. Itunes no longer recognizes my IPAD. What can i do?
See here -
Recovery Mode
http://support.apple.com/kb/HT1808
iPad not showing up in iTunes on a PC
http://www.apple.com/support/ipad/assistant/itunes/
iPad not showing up on a Mac
http://support.apple.com/kb/TS1591 -
My iPad froze during an update. What do I do?
My iPad froze during an update. What do I do next?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Ipad froze during latest update
during the latest update my ipad froze at the screen with the apple, how can i reboot
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPad froze during latest update.
I Have an iPad 3, 128 gb, less than 6 months old. I was installing the latest update and it froze with the white Apple logo on the black screen and the download
bar 1/4 of the way finished. I have no response from the power button or the reset button. Any suggestions?You've tried a soft-reset, pressing and holding both the home and sleep buttons for 10 to 15 seconds ?
If that doesn't work then try recovery mode and then restore to your backup : If you can't update or restore your iOS device -
I tried to update my iPod Touch 4th Generation with the new ios6 release but it froze during the update. Now all I get when I try to turn the iPod on is a blank screen. Can anyone advise me?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts. -
my iphone 4s froze during software update. I have removed and reinstalled itunes, but still will not recognize it nor reset it. In the screen I can only see a pic of the usb cable indicating me to conect with itunes. have done it several times but still does not solve my issue. I cannot use the device at all. any suggestions?
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
TS1629 An unknown error occurred (3194) during ios6 update pls help to get it resolved
An unknown error occurred (3194) during ios6 update pls help to get it resolved
There is no supported method to downgrade iOS.
Put the device in DFU mode and restore. Be aware, ALL iPhones require a valid SIM for activation. The SIM does not need to be for an active account, but it must be a SIM from the carrier the device is locked to. -
HT4972 My iPad hung during Os update
My iPad hung during Os update ... screen shows the silver apple and a bar with less than 1/8th progress. My iMac does not seem to see the iPad nor can I power the iPad up or down. What can I do?
Try restoring with recovery mode.
http://support.apple.com/kb/ht4097 -
My ipad 1 froze during an update of OS...how do I reset?
My IPAD 1 froze before the update to OS system Began. I am unable to turn it off. Is there a way for me to force it close and start over?
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts. -
Iphone froze during iOS update
My iPhone 4s froze up the other day. I was installing the newest iOS update. It starts with the apple logo and then a progress bar starts to build underneath it not long after that starts it switches to a loading wheel that freezes up until it starts the process all over again. I tried both holding the power button and the soft reset which both just start this same process over again. I tried connecting to my MacBook but it says I need to verify on the phone that I want to connect to iTunes, which I can't do because I get nothing on the screen besides what I already described. Any suggestions? Thank You.
Hey jonesjm25,
Thanks for the question. It sounds like something may have been interrupted during the update process. To resolve your issue, let’s try restoring your iPhone in recovery mode:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
MacBook Pro froze during software update, now it's stuck at gray screen
My MacBook Pro was running a little slow today so I did a Disk Utility repair and that went fine then I did a software update (OS X, Java and remote desktop) but it froze during the last ten percent of the update install and now when I boot up it won't get past the gray apple screen. I tried to restore Lion but since I bought this used my Apple ID wasn't used to purchase Lion so I can't do a restore.
I've tried to safe boot and boot from a CD but no go.
I also tried the short and long Apple hardware tests and those found no problemsIn case anyone else needs an answer to this, I called in to Apple. Tech support said to power it off and let it reboot itself. I had to go back into updates and tell it to finish the install (restart computer, was the only step remaining) and it worked fine. It took longer because it had gotten hung up during the previous restart. ( Just to clarify, I was stuck on the grey screen after the restart step of the install.)
-
Lenovo 3000 n200 0769 BRG
As per the title my laptop froze during a bios update, I now have a €300 paper weight.
When turning on the fan spins, the cd tray works, but the screen stays blank and only a single power light stays on. I tried starting the machine with no RAM inserted to see if the bios would beep. It didnt.
I think i need to reset the CMOS and in another thread there were instructions as follows " two exposed metal traces labelled CLRP1. You need to short those traces together for a few seconds."
I can get to the traces CLRP1, but it doesnt work.
Could someone please verify how to short those? What do you actually do?
I lightly pushed a flat head Metal screwdriver on the traces, also tried a paperclip,other screwdrives, and basically everything metal.
Could someone clarify what needs to be done? Thanks so muchIf the bios is corrupted, yes, it may be bricked.
Search the web and these forums for "phoenix bios recovery"
there may be some hope. I have never tried any of the solutions
I have found about a Bios recovery disk.
The solution for a bios "hard reset" on my N100 was to dis-assemble
it to the point where I could short the leads of the bios backup battery
for about 5 seconds. The bios on mine was not corrupted, though.
Find the Hardware Maintenance Manual for your laptop model HERE
and look for how to remove the top cover. The battery is probably
on the bottom of the motherboard. A bit tedious and complicated
if you are doing something like this for the first time. -
My iPad froze while upgrading to iOS8. It's two years old, but still qualified for the upgrade. The entire upgrade happened. The iPad then shut down and restarted. The black apple on the white screen came up along with a progress bar. The bar kept loading until to it was over 95% done. It stopped and has been that way for almost an hour. What can I do? Should I just turn it off and start it again?
Thanks!
PatI would wait onager to see if the upadate completes. if it remains stuck try a reset of the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the buttons and let the device restart. You will not lose data doing this. It's like a computer reboot.
Maybe you are looking for
-
Default XSLT Stylesheet to transform BW XML Data?
I'm currently working on a deafult XSLT Stylesheet to convert a BW XML Query Result Set into an html grid. [code] <!-- #========================================================================== XSL Transformation that displays Template Properties, L
-
Issue in mapping Operation subcontracting scenario
Hi all, I will explain my scenario of subcontracting, i am getting issue when mapping the scenario in SAP. Scenario: For manufasturing 1 SF my client require 4 operations. All the raw materials required will be issued in the first operation. After fi
-
I have a JFrame in my application and I want to bring to front to other frames in my application when some event occurs. Any combination of frame.toFront(), frame.requestFocus(), frame.show(), frame.setVisible(true) didn't work. Only this code worked
-
hi all, can any one send me the Design patterns used for ABAP objects programming in ABAP. eg mvc and sample code which uses the design patterns cheers senthil
-
i buy macbook pro occsaion ; i download osx 10.8.2 from internet and reintal osx , after 2 days my keyboard is not working correctly ( i mean when i touch the keys ,i see the symles , i cant get letters when i type . i try with externel keyboard b