Ipad froze during latest update
during the latest update my ipad froze at the screen with the apple, how can i reboot
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
My iPad froze during latest update.
I Have an iPad 3, 128 gb, less than 6 months old. I was installing the latest update and it froze with the white Apple logo on the black screen and the download
bar 1/4 of the way finished. I have no response from the power button or the reset button. Any suggestions?You've tried a soft-reset, pressing and holding both the home and sleep buttons for 10 to 15 seconds ?
If that doesn't work then try recovery mode and then restore to your backup : If you can't update or restore your iOS device -
My new IPAD froze during software update thru itunes on my winows PC. The normal reset instructions holding the home and power buttons do not work. Itunes no longer recognizes my IPAD. What can i do?
See here -
Recovery Mode
http://support.apple.com/kb/HT1808
iPad not showing up in iTunes on a PC
http://www.apple.com/support/ipad/assistant/itunes/
iPad not showing up on a Mac
http://support.apple.com/kb/TS1591 -
My iPad froze during an update. What do I do?
My iPad froze during an update. What do I do next?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
My ipad 2 froze during ios6 update. it is over two hours since it started the update.
Does anyone know how to do a hard reset or something similar?
pressing and holding the power button does not do anything.
ThanksYou may have to try the above proceedure More than Once...
Some Users have reported that as many as 7 attempts were tried before success...
Also, if the Device has been Modified, this will Not necessary work... -
HT201263 Crashed iPad during latest update and unable to restore
I have followed all of these steps:
iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.
Use iTunes to restore your device.
When I connect to iTunes and the above message appears, I can see behind the message that it says "iPad Recovery Mode" but for the serial number it has n/a it says that I am up to date on software on iPad, but when I click ok on the "iTunes has detected..." the opportunity to click on "restore iPad" disappears! I am stymied!PS: I read all of the threads on: Re: iPad crashed during OS update and now iTunes can't restore and followed what they suggested - no resolution to be had
-
Ipad 3 with latest updated software
since updating my ipad 3 to latest update i now have on my email button 3076 emails unread i do not have any unread emails at all so this should not be there would be grateful for any help on how to get rid of it
There are no unread emails on your pad, but I bet there are 3, 076 in the inbox on your mail providers side. Sometimes, during an upgrade, the mail program on the pad gets the number of e mails from the mail providers server.
So using a computer, or safari on the pad, use web mail to look at the account, and I suspect you will find a bunch of real old unopened emails sitting there. Probably from before you even had the pad. Delete them there - there is likely some sort of bulk delete capability at that end of the process. -
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts. -
my iphone 4s froze during software update. I have removed and reinstalled itunes, but still will not recognize it nor reset it. In the screen I can only see a pic of the usb cable indicating me to conect with itunes. have done it several times but still does not solve my issue. I cannot use the device at all. any suggestions?
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
Cannot connect to iCloud server on iPad after installing latest update
I cannot access iCloud through iPad since installing latest update. Keep getting Accept the new terms etc" but can't do so through the setting s page
When I go to the settings page to access iCloud and click on terms and conditions it gives the message
-
ITunes won't recognise my iPad since the latest update.
iTunes won't recognise my iPad since the latest update. I have tried the solution on http://support.apple.com/kb/TS1538, twice over but with no result.
I have repaired each of the iTunes elements and restarted both the computer and the iPad several times.
I have Windows Vista Ultimate 64-bit operating system.
Processor: Intel (R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz 2.40 GHz
iOS 8.0.2 iPad 64GBHi Skydiver119
Thanks for your reply. That was what the solution I found on that link I posted, except it said to include the 'Bonjour' too. I've uninstalled everything, downloaded the latest iTunes, reinstalled and restarted the computer twice, but it still won't recognise the iPad. I've also rebooted the iPad each time.
Any other ideas on what might work?
Thanks in advance -
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
Hi ....
"I get the itunes logo and then nothing else"
Use Recovery Mode > If you can't update or restore your iPhone, iPad, or iPod touch -
My iphone5 has locked up during latest update
my iphone 5 has locked up during latest update. I cannot turn off and it is halfway thro update. Been like
this for8 hours!Reset the phone: Press both the home and lock buttons for up to 1 minute, releasing when the Apple logo appears.
-
I tried to update my iPod Touch 4th Generation with the new ios6 release but it froze during the update. Now all I get when I try to turn the iPod on is a blank screen. Can anyone advise me?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
PCI-MIO-16XE-50 abruptly failed
My PCI-MIO-16XE-50 can't read any analog inputs (always sees the most negative possible voltage) and can't write any analog outputs (outputs always 0). It was working fine on Friday, and I don't know what happened over the weekend to make it fail--th
-
How to return Varchar2(1) from function ?? Simple but annoying :(
Hi, I have a function something like... CREATE OR REPLACE FUNCTION Test ( id number) RETURN VARCHAR2 ... Now I am using this function in a View as ... select test(123) as Test In the View description, this column appears as Varchar 4000. whereas I wa
-
Forms won't do order by after the formula columns or constants in union all
i have a big select as : select * from ( select .....,id doc_id, '1' op from ..... union all select ......., id doc_id, '2' op from ..... union all select ......., id doc_id, '3' op from ..... ) order by id, op where i can have the same id for a numb
-
How to edit head tag for fullscreen presentation
Hello! I'm making a presentation and as such I would like to open fullscreen in safari. I have read some posts in various places suggesting the use of <meta name="apple-mobile-web-app-capable" content="yes"> , but for that I have to include the code
-
how much it costs to replace earphones output in mac book pro 13''