Ipad frozen after resetting wont respond

I reset my ipad to restore factory settings, that was over an hour ago and i still see the apple logo with a black screen. I have shut it donwn by pressing both buttons at the time, but the apple disappears for a second than reappears agin and nothing happen.

If you tried this and the iPad did not respond.....
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
It might be time for recovery mode.
http://support.apple.com/kb/ht4097

Similar Messages

  • IPad 3rd Generation frozen after reset was done. I get a logo but no status bar

    iPad 3rd Generation frozen after reset was done. I get a logo but no status bar

    Hello there, darney87.
    The following Knowledge base article offers up some great troubleshooting steps for the issue you're describing with your iOS device showing an Apple logo:
    iOS: Not responding or does not turn on
    Resolution
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected,  restart your device.
    If the device remains unresponsive or does not turn on (or power on),  reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Ipad frozen after itunes closed during download....any suggestions

    ipad frozen after itunes closed during download..........any suggestions?

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Reset of iPad. After reset was done the Apple logo never appeared just have a rotating circle in the middle of the screen. What do I do now?

    Had a problem with my mail and was following online suggestion to do a reset of iPad. After reset was done the Apple logo never appeared just have a rotating circle in the middle of the screen. What do I do now?

    Restore the iphone from itunes on your computer

  • Music not syncing on iPad 3 after resetting

    After resetting my iPad 3 and setting it as a "new" iPad, I have not been able to sync any of my music onto it. I can, however, sync the apps. Any suggestions on how to fix this?

    Via iTunes while connected to my computer. It get go as far as "Step 6 of 6", then will show "Waiting for changes to be applied" and won't do anything. I've even let it sync for 2+ hours and none of my music get's added while still showing the Waiting message.

  • IPad frozen after attempting to restore earlier version

    My iPad is frozen after I tried to restore an earlier version - 20 Dec 2012 - via my laptop. I have used the on/off and centre control together to try and re-boot, but the apple returns and no further action occurs. Connecting it to iTunes via the laptop does not work as it appears the laptop does not read that the iPad is connected. Any suggestions?

    Are you using iTunes to restore it? Were you getting error messages? If so, what were they?
    ~Lyssa

  • IPad Frozen after 3.2 update

    Help, my ipad froze after attempting to install the update today. I tried putting it into DFU mode and now it won't even turn on. I received an itunes 1602 error. Anybody else experience this?
    Jay

    Winnersall wrote:
    Help, my ipad froze after attempting to install the update today. I tried putting it into DFU mode and now it won't even turn on. I received an itunes 1602 error. Anybody else experience this?
    Jay
    If you search 1602 in these discussions, you'll get some answers.

  • TS4062 ipad frozen, tried reset from rec. mode, usb cable showing on screen, waiting for ipad, then ipad fails to respond. what can i do?

    ipad mini froze when charging, have tried all restore options, when i get to waiting for ipad in itunes when restoring in recovery mode the usb cable disappears from the screen, the apple logo appears then the recovery line beneath logo, then there is no further response from ipad. have been trying to resolve this issue for couple days now very frustrated. can anyone help please?

    Use the charger that came with the iPad or a name brand charger of equal or greater capacity. Plug that into a known good wall outlet. Then wait at least an hour. While the iPad is still plugged in to the charger reset your iPad. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
    If the iPad restarts continue to charge it until the battery is at 100%
    If the iPad does not start Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • My 3rd generation iPod Touch is still frozen after reset.

    Hello
    I have a 3rd generation iPod Touch. But it's frozen. I can't turn it on. I only see a black screen. I already tried to reset/reboot it, but it didn't worked. I already connected it to my computer, but nothing happened. My battery has more than 50 %.
    Can someone help me , please ?

    Hold the Sleep/Wake + Home button down for at least 30-seconds or until the Apple logo appears.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Ipad frozen after reinstalling updated software

    My ipad is stuck with an apple and a line below after it reinstalled new software, now PC wont recognize it, It just sits there?

    Sounds like your iPad is in recovery mode.
    Follow these instructions to resolve recovery mode:
    http://support.apple.com/kb/HT1808

  • Ipod frozen after reset

    after I reseted my ipod, I got the apple logo, but the ipod never moves on to the main menu. It is just frozen on the apple logo.
    Also, if I connect it to my PC, it is not recognized ...

    Have downloaded latest ipod update and instructed to plug into mains power (why ? what would be the sense of complicating a system by having varing power sources? which is what I thought original) but now i am comforted by the fact that the ipod doesn't recognise the mains power and neither does the PC now recognise the ipod. When I go on line for support Apple doesn't recognise the serial number of the ipod so after resorting to reboot as all else has failed to find that the ipod does recognise the reboot, just keeps coming back to asking for mains power. My ipod has become and expensive paper weight
    My ipod was purchased 21 Nov 04 suggestions at this point are
    1. Don't buy one
    2. If to late for one then if it isn't broken then don't try to fix it with updates.
    Any help?
    In the land of the blind apple the one eyed geek would be king.

  • IPad frozen after trying to install iso 7

    I just downloaded iso 7 on my iPad. I can enter my password, but it still says it's "joining network"...about 15 hours?! I can't cancel, I did get a pop up twice saying it wasn't complete, continue, so I clicked continue. But it's frozen on Joining network.
    Any ideas? I can't go back to look, but I think it was the iso 7.0.2
    Thanks!

    Please see: http://support.apple.com/kb/HT1808 for assistance.
    Regards,
    Steve

  • Ipad frozen after software update

    When I turn my ipad on the screen is locked with a picture of the charger cable going up to an arrow below the itunes symbol.
    This happened after I updated it to the new version.

    Sounds like your iPad is in recovery mode.
    Follow these instructions to resolve recovery mode:
    http://support.apple.com/kb/HT1808

  • Apps still frozen after reset when you touch the app the screen flashes and then goes back to selection screen

    Help

    Try another  Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.]

  • How do I get my gmail working on my iPad again after resetting the account password?

    I changed my Gmail account password and now when I try to access my mail with my iPad it says it cannot connect to the server because the password is incorrect, even when I try to update it to the new one.  Any thoughts?

    Hi jrevans99,
    If you are having password issues with your mail account on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
    iOS: Troubleshooting Mail
    Regards,
    - Brenden

Maybe you are looking for

  • Importing and Exporting Data with a Clob datatype with HTML DB

    I would like to know what to do and what to be aware of when Importing and Exporting data with a Clob Datatype with HTML DB?

  • Hp g62 and windows 8.1- rebooting loop

    Hi, I have a hp g62-b16st. It's a remarketed product with Intel core i3 2,4, 500GB HDD, 4gb RAM, integrated Intel HD graphics and dedicated ATI Mobility Radeon card (5470 hd I believe). This setting worked pretty well with 64-bit Windows 7 but recent

  • CFMail breaks up attachments filename with non ASCII

    Hi CF-Devs out there! My problem is, that when attaching files via cfmailparam - no matter if inline or not - and using a filename that contains or a non 7bit-ASCII character or a simple space, the filename is not displayed correctly in Outlook nor T

  • Account determination movement 309- Transfer posting material to material

    Hi, I have two materials: - Material A--> Valuation Class 6005; valuated material - Material B--> Valuation Class 6006; valuated material I need to convert material 'A' in material 'B' with movement type '309' - Transfer posting material to material

  • Add field to GR

    HI How can we add the field in GR for text purpose? Pls tell me the steps how to configure or how to select the fields in SPRO