Ipad frozen in Recovery/Restore
Bought my ipad 2 today....was syncing with itunes, pushed the bar to stop syncing on ipad after an hour.....then itunes said ipad in "recovery" and I had to "restore"---pushed the button and now it's frozen with a picture of an apple. Someone...PLEASE HELP!!! What can I do to get my ipad going again?
Hi,
Help here for an unresponsive iPad.
http://support.apple.com/kb/TS3281
Carolyn
Similar Messages
-
HT201210 ipad frozen unable to restore thru updated itunes
Have 2 iphones and 2 ipads mine has been out for a month and 1/2 my itunes is updated I have spent days and nights trying to get it restored all I get is the usb plug with arrow going to itunes on my screen when I go to resore as it says to do it says unable
Regarding my last post unable to Restore my Ipad 2 , The screen is black except for usb cord with arrow up to iTunes . I have on multiple times tried to restore as it recommends but every time it says unable to restore ... THis is with the new updated Itunes as it also says to do.
-
Ipad frozen in software restore
my ipad2 32 gig locked up in a restore settings, it is frozen in the apple displayed, anyway to fix this
thanksTry a hard reset. To do a hard reset hold in the home and power buttons untill a silver apple symbol appears then, follow the instructions.
Good Luck Jake -
my ipad is in recovery mode that failed,it shows the progress bar but is frozen. Itunes shows the wrong name for the Ipad but the correct account.
You're gonna have to restore the iPhone from your last backup with iTunes. You did do a backup before you attempted to update the software didn't you?
-
I am trying to restore software on my iPad which is connected to my PC with iTunes when i'm in recovery mode a warning comes up
"The iPad could not be restored an unknown error occurred (1604) This i have discovered probably a USB timing problem ?
I have followed all suggestions but still my iPad screen is locked with a iTunes logo and a USB cable beneath it, wish I had never bothered
to update it now. Any help would be appreciated. rgWhen I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
I recently did the latest update, and then I charged my Ipad 2 afterwards. I went to use my Ipad 2 days later, and it would not even turn on. Then after a couple minutes, the apple logo appeared as if it were loading. It continued to do this for a few minutes, and then the screen starting turning on and off. Then 5 minutes after that, my lock screen appeard and froze. Then it shut itself off again. I tried plugging my ipad into Itunes to do the recovery restore, but I kept getting error messages.
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
Hey,I've got a problem on my iPad mini for a few days now?My iPad is in recovery mode at the moment and I Cannot restore my Ipad with iTunes...Can anyone help me with the solution?Each of your helps will be appreciate...Thanks for all the helps...
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times -
What if you have a situation where Restore did not work. I do. The ipad mini says it is disabled, connect to itunes. When connected, it says that it is locked! I have tried using Recovery/Restore but after it completed, the ipad mini still malfunctions. It does not allow you to start the device. The slide image keeps dancing around the screen. The opening page keeps changing in size and the keyboard types on its own! What can be done to fix this????????
Maybe a reset would help, to be followed by trying the recovery again.
To reset, hold the on/off and home buttons together for about 10 seconds till the Apple logo appears. Then do the recovery.
If this doesn't solve it, I recommend visiting an Authorized Apple Service Center. -
What does it mean when my ipad is in Recovery mode? It's connected to my imac for software update and it says I must "restore" the ipad before itunes can be used. Will I lose everything on my ipad?
Unless you have a backup from which you can restore, yes you will lose all of your data and settings.
You should be able to sync your content back to the iPad if you have been syncing with iTunes all along. If you don't sync with iTunes, you can download much of your paid content again for free as long as you use the same Apple ID. This explains downloading past purchases.
http://support.apple.com/kb/ht2519
Unfortunately, at this point, you must restore the device before you can move on. There is nothing you can do to avoid it now. -
I forgot my ipad passcode. I tried:
1. Simply to restore the ipad on the computer it is normally synced with, but it askes me to enter the passcode.
2. to restore ipad using the recovery mode option. However when I try this iTunes askes me to turn off the "find my ipad" cloud option (which of course I cannot do as I cannot open the ipad).
3. to remotely erase my ipad, but as it is locked down it does not seem to be connecting to the internet and hence cannot seen through my "find my ipad".
I am completely stuck! Any suggestions please?!?!?I forgot my ipad passcode. I tried:
1. Simply to restore the ipad on the computer it is normally synced with, but it askes me to enter the passcode.
2. to restore ipad using the recovery mode option. However when I try this iTunes askes me to turn off the "find my ipad" cloud option (which of course I cannot do as I cannot open the ipad).
3. to remotely erase my ipad, but as it is locked down it does not seem to be connecting to the internet and hence cannot seen through my "find my ipad".
I am completely stuck! Any suggestions please?!?!? -
After updating my ipad to ios7 it is on recovery mode. Then I tried to reboot it and it shows an image to connect to iTunes. I tried to connect to iTunes and restore it but it says ipad could not be restored and an error occurred. What can I do now???
http://support.apple.com/kb/TS3694#error3194
This might help. Good luck, I really hope this all works out. :-) -
My ipad 2 on recovery mode I try to restore is but prompting m e with error
my ipad 2 on recovery mode I try to restore is but prompting m e with error
What error?
If it's error 37, try this:
http://support.apple.com/kb/TS3694#error37
You may also be interested in this article:
http://support.apple.com/kb/HT1808 -
NEW IPAD 2 STUCKED ITUNES LOGO/ RECOVERY/RESTORE MODE.HELP!
Just bought Ipad2 the 2 days ago. now it's stucked to itunes logo after an update. at first it says in recovery/restore mode.now can't detect by itunes.need help pls.
With you iPad connected to your computer via USB, open iTunes, then press and hold BOTH the power and home buttons at the SAME time until your iPad begins to restore.
-
my ipad i have been restore it yesterday my computer shut down in the middel now my ipad2 stuck in recovery mode and cant be detect by itunes and it is jaikbroken ?
Try these steps. If it doesn't work the first time, try a second time.
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off. (If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.)
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on. (Note: If you see the screen that shows you are out of battery, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.)
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button
If necessary, open iTunes. You should see the following "recovery mode" alert: "iTunes has detected an iPhone in recovery mode..."
Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links. http://support.apple.com/kb/TS1538
Hope this helps!
~Joe -
Okay, so I forgot my password and so I restored it through iTunes, it downloaded the update but when it came to restore, I got an alert which said "This iPad could not be restored. An unknown error occured(21)" and my iPad is stuck in recovery mode and it won't even turn on. Please help me!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
Maybe you are looking for
-
In the past two weeks I have been documenting my Lion problems. First, Arrows gone from finder windows; makes it difficult in comparing long lists of files in folder, or compare documents when reviewing line by line. This is obviously a change by peo
-
How can i use reuse_alv_fieldcatalog_merge function module
I am using below steps for populating the final internal table.How can I use reuse_alv_fieldcatalog_merge function module in the place of declaring all these fields.How canI put title of the report in reuse_alv_fieldcatalog_merge function module. FOR
-
How to make a link in a report open a Form in a different region of the same page ?
Hi, I developped a report and a form for the same table. I also created a link and used it in my report so that when I click on the link of one record, the form is opened and display this record. My problem is that when I include my report as a portl
-
Hi all. We have a SQL Server 2012 installed to a fresh Windows Server 2012 Server. There is a service account domain\rusystem01 created to run SQL services. It is added as a Local administrator on this server. The issue is that SQL Server does not se
-
Again about External Window in WDA
I have some troubles with running new processes in E-Recruiting. It is necessary to run my process when I'm pushing the button in the requisition form. I'm creating external window with method CREATE_EXTERNAL_WINDOW and after that my process is runni