IPad full after last upgrade

When I plug my iPad into my computer to sync, it is now saying it is full, and sometimes over capacity. It's been switching back and forth between full, 6.25 GB remaining, and over capacity by 2.46 GB for the last half an hour. I've removed all my music, movies, calendar, etc. and a bunch of aps from the iPad, and it is now reading that there are 10 GB free, but they are all OTHER. When it was reading full the majority was OTHER. Before the last sync, without making any changes to what I had on the iPad, it read 12.46 GB free. Anyone else have this problem? What can I do to fix it?

It synched when it wasn't plugged in to the computer, but won't sych plugged in.

Similar Messages

  • [SOLVED] Unable to boot after last upgrade [HP Smart Array]

    Hello guys.
    After last upgrade I'm unable to boot. I have fileserver with 2 discs in HP Smart Array RAID 1.
    While booting, kernel is unable to find my raid (should be cciss) and therefore lvm2 hook fails to find root partition. While going into recovery, I can chroot without an issue, lsmod shows that cciss driver is properly loaded, disk exits in /dev/cciss/, logical group and volumes are detected properly.
    No matter what I do, I just can't get cciss module into kernel. Putting in MODULES in mkinitcpio.conf's MODULES="" didn't help. I'm listing my initramfs images and there is no cciss.ko. I'm also searching for module in my filesystem and can not find it.
    Any help will be appreciated.
    Last edited by edke (2012-06-04 10:39:20)

    Thank you for your quick reply.
    DSpider wrote:First of all, have you tried the Fallback entry? Because initramfs-linux-fallback.img is supposed to have a full range of modules.
    Of course, no change.
    DSpider wrote:
    Second, after editing /etc/mkinitcpio.conf you need to regenerate your initramfs.
    # mkinitcpio -p linux
    But the MODULES section needs to have something in there...
    Here's mine:
    MODULES="pata_amd sata_nv ehci-hcd ohci-hcd ext2 ext3 ext4 vfat snd-hda-intel"
    You probably need "mdadm" or "mdadm_udev" in there too, I'm not sure... I don't use RAID, but maybe these will help:
    https://wiki.archlinux.org/index.php/Mk … Using_RAID
    https://wiki.archlinux.org/index.php/So … ID_and_LVM
    HP Smart Array is hardware RAID, therefore I don't need mdadm. Right module should be cciss, but this is somehow not working. Adding this into MODULES does not add cciss module to image.
    When I'm booting from Arch install for recovery and chroot, cciss is loaded and my HP Smart Array disk is visible.

  • I tunes is missing after last upgrade help! Please

    After last upgrade I noticed ITunes App is not on iPad.  How do I get it back?  I tried to download it again but all I get is it comes loaded on iPad.  Can anyone help me.  Thank you

    Home Screen: Missing App Store, FaceTime, iTunes or Other Icon

  • I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

    I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
    I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

    I am going on the guess that an old driver is still installed...
    Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
    Reset the Printing System:
    OS X Mavericks: Reset the printing system
    Now, Add the printer in Print & Scan prefs.

  • I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices

    I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
    People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
    Sorry for my english, i am from Russia.

    I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
    It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones!

  • [NEARLY SOLVED] font rendering in gtk apps problem after last upgrade

    Im' using KDE, cairo-lcd, libxft-lcd... my fonts looked beautifully, but now they look horrible...
    After last upgrade my gtk apps (firefox, thunderbird) render fonts in an ugly way...
    I've tried to revert to pango 1.16.5 with no lucky result (the same problem)...
    here is the log:
    [2007-08-19 14:56] upgraded bind (9.4.1_P1-2 -> 9.4.1_P1-3)
    [2007-08-19 14:56] upgraded glib2 (2.14.0-2 -> 2.14.0-3)
    [2007-08-19 14:56] upgraded gnupg2 (2.0.5-1 -> 2.0.6-1)
    [2007-08-19 14:57] upgraded gtk2 (2.10.14-2 -> 2.10.14-3)
    [2007-08-19 14:57] upgraded kernel26ck (2.6.22.2.ck1-1 -> 2.6.22.3.ck1-1)
    [2007-08-19 14:57] upgraded libdownload (1.1-1 -> 1.1-2)
    [2007-08-19 14:57] upgraded libevent (1.3b-1 -> 1.3d-1)
    [2007-08-19 14:57] upgraded libxtst (1.0.2-1 -> 1.0.3-1)
    [2007-08-19 14:57] upgraded nvidia-ck (100.14.11-2 -> 100.14.11-3)
    [2007-08-19 14:57] upgraded sip (4.6-1 -> 4.7-1)
    [2007-08-19 14:57] upgraded pyqt (3.17.2-1 -> 3.17.3-1)
    [2007-08-19 14:57] upgraded xf86-input-joystick (1.2.2-1 -> 1.2.3-1)
    [2007-08-19 14:57] upgraded xorg-server-utils (1.0.4-1 -> 1.0.4-2)
    [2007-08-19 14:57] upgraded xorg-utils (1.0.2-2 -> 1.0.2-4)
    [2007-08-19 14:57] upgraded xorg-xdm (1.1.5-1 -> 1.1.6-1)
    [2007-08-19 14:57] upgraded xterm (225-1 -> 229-1)
    [2007-08-21 00:16] upgraded cpio (2.8-1 -> 2.9-1)
    [2007-08-21 00:16] upgraded ed (0.5-3 -> 0.8-1)
    [2007-08-21 00:16] upgraded initscripts (2007.08-1 -> 2007.08-2)
    [2007-08-21 00:16] upgraded intltool (0.36.0-1 -> 0.36.1-1)
    [2007-08-21 00:16] upgraded libarchive (2.2.5-1 -> 2.2.6-1)
    [2007-08-21 00:16] upgraded man-pages (2.60-1 -> 2.64-1)
    [2007-08-21 00:16] upgraded pciutils (2.2.4-2 -> 2.2.6-1)
    [2007-08-21 00:16] upgraded readline (5.2-2 -> 5.2-3)
    [2007-08-22 00:16] upgraded gdbm (1.8.3-3 -> 1.8.3-4)
    [2007-08-22 00:17] upgraded kernel26 (2.6.22.3-1 -> 2.6.22.4-2)
    [2007-08-22 00:17] upgraded lcms (1.16-1 -> 1.17-1)
    [2007-08-22 00:17] upgraded libice (1.0.2-1 -> 1.0.4-1)
    [2007-08-22 00:17] upgraded libxrender (0.9.2-1 -> 0.9.3-1)
    [2007-08-22 00:17] upgraded procinfo (18-3 -> 19-1)
    [2007-08-22 00:17] upgraded xorg-apps (1.0.2-4 -> 1.0.3-1)
    [2007-08-22 23:49] upgraded kernel26 (2.6.22.4-2 -> 2.6.22.4-2.1)
    [2007-08-22 23:49] upgraded librsvg (2.18.0-1 -> 2.18.1-1)
    [2007-08-22 23:49] upgraded libxpm (3.5.6-1 -> 3.5.7-1)
    [2007-08-22 23:49] upgraded libxaw (1.0.3-1 -> 1.0.4-1)
    [2007-08-22 23:49] upgraded makedev (3.8.3-1 -> 3.23-1)
    [2007-08-22 23:49] upgraded mcpp (2.6-1 -> 2.6.4-1)
    [2007-08-22 23:49] upgraded naim (0.11.8.2.1-1 -> 0.11.8.3.1-1)
    [2007-08-22 23:49] upgraded nfs-utils (1.0.12-2 -> 1.0.12-3)
    [2007-08-22 23:49] upgraded pam (0.81-4 -> 0.99.8.1-3.1)
    [2007-08-22 23:49] upgraded pango (1.16.5-1 -> 1.18.0-1)
    [2007-08-22 23:49] upgraded sox (13.0.0-1 -> 13.0.0-2)
    [2007-08-22 23:49] upgraded xorg-apps (1.0.3-1 -> 1.0.3-2)
    [2007-08-22 23:49] upgraded xtrans (1.0.3-1 -> 1.0.4-1)
    [2007-08-25 15:25] upgraded glibc (2.6.1-1 -> 2.6.1-2)
    [2007-08-25 15:25] upgraded bftpd (1.9-1 -> 2.0-1)
    [2007-08-25 15:25] upgraded gcc (4.2.1-3 -> 4.2.1-3.1)
    [2007-08-25 15:25] upgraded gtk-doc (1.8-2 -> 1.8-3)
    [2007-08-25 15:25] upgraded hal-info (0.20070618-1 -> 0.20070725-1)
    [2007-08-25 15:25] upgraded perl-xml-simple (2.16-2 -> 2.18-1)
    [2007-08-25 15:25] upgraded icon-naming-utils (0.8.2-2 -> 0.8.5-1)
    [2007-08-25 15:26] upgraded kernel26 (2.6.22.4-2.1 -> 2.6.22.5-1)
    [2007-08-25 15:27] upgraded kernel26ck (2.6.22.3.ck1-1 -> 2.6.22.5.ck1-1)
    [2007-08-25 15:27] upgraded libgnomeprint (2.18.0-1 -> 2.18.1-1)
    [2007-08-25 22:41] removed libgnomeprintui (2.18.0-1)
    [2007-08-25 22:41] removed libgnomeprint (2.18.1-1)
    i dunno what happened...
    plz, someone help me
    regards
    Last edited by saneone (2007-08-30 18:11:32)

    Bogart wrote:
    I think the spacing now is correct, while before it was wrong. The only "problem" is that you got used to a bad font rendering, and now that it has changed for better you feel like it's different and don't like it.
    Really, *most* of the problems that people find in Linux's fonts are just because they are used to the awful default fonts from Windows XP. Yes, people can even get used to those fonts and believe they're good!!! And when they see correct fonts in Linux they think they're bad...
    What I would do is remove the MS TTF fonts. They work bad in Windows and worse in Linux. You should use Bitstream Vera or DejaVu if you want good quality fonts (especially in web pages).
    But, then again, you might think that they look wrong just because you're not used to it... Oh, well...
    What does correct font / correct spacing mean ?
    IMO, that doesn't make any sense, because that's a totally subjective matter, like many other things in this world.
    BTW, I love how fonts look in Windows, and I think that must be the only thing MS got right. Thus, I'm using ms fonts in linux, and a rendering as close as possible (no autohinting or antialiasing or subpixel rendering).
    Similarly, I could find a woman beautiful that you would find ugly or just average. We are all different, and it's better that way

  • Startdict crashes after last upgrade

    Startdict crashes after last upgrade
    $ stardict
    XDXF data parsing plug-in loaded.
    HTML data parsing plug-in loaded.
    Dict.cn plug-in loaded.
    Man plug-in loaded.
    PowerWord data parsing plug-in loaded.
    WordNet data parsing plug-in loaded.
    Spelling plugin loaded.
    Wiki data parsing plug-in loaded.
    QQWry plug-in loaded.
    WordNet dict rendering plug-in loaded.
    bookname: slovnyk_en-pl, wordcount 15424
    bookname: slovnyk_pl-en, wordcount 20087
    bookname: StarDict dictionary, wordcount 9
    [warning] Binding '<Ctrl><Alt>x' failed! Already assigned.
    (Gdk) [critical] IA__gdk_window_set_cursor: assertion `GDK_IS_WINDOW (window)' failed
    ERROR:compositelookup.cpp:34:void CompositeLookup::send_net_dict_request(const std::string&, const std::string&): assertion failed: (NetDictRequests.end() == std::find(NetDictRequests.begin(), NetDictRequests.end(), request))

    Maybe (because of occurrences of NetDictRequests) it is caused by internet modules which you don't have to need. I use just my local dictionaries and my ~/.stardict/stardict.cfg looks like:
    [stardict-private]
    version=1.0
    [/apps/stardict/manage_dictionaries]
    dict_order_list=/usr/share/stardict/dic/quick_italian-english.ifo/usr/share/stardict/dic/encz.ifo/usr/share/stardict/dic/czen.ifo/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo
    dict_config_xml=<dictgroup name="Default Group"><querydict><localdict enable="true" file="/usr/share/stardict/dic/quick_italian-english.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/encz.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/czen.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo"/></querydict><scandict><localdict enable="true" file="/usr/share/stardict/dic/quick_italian-english.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/encz.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/czen.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo"/></scandict></dictgroup>
    dict_default_group=Default Group
    [/apps/stardict/preferences/dictionary]
    only_scan_while_modifier_key=true
    use_scan_hotkey=false
    enable_sound_event=false
    [/apps/stardict/preferences/network]
    enable_netdict=false
    [/apps/stardict/preferences/main_window]
    hide_on_startup=true
    search_website_list=
    window_width=680
    window_height=359
    hpaned_pos=114
    (Well, there are some strange symbols after ".ifo"s on "dict_order_list=" line, they couldn't be pasted.)
    Internet (mainly those Chinese) modules are really unusable for me, so the first thing I do when I install StarDict is I delete all occurrences of <virtualdict ... /> and <netdict ... /> in the configuration file. Maybe it will help you too if you keep just <localdict ... /> items.
    There's other thing that bothers me now with StarDict - RealPeopleTTS works fine with the version 3.0.1-3 but hesitates to with the up-to-date version 3.0.2-2.
    Last edited by nemamradfazole (2011-01-23 01:33:27)

  • I cannot access Facebook on my iPad since the last upgrade

    I cannot access Facebook on my iPad since the last upgrade - I have turned the iPad off, recharged it and still brings up an old page every time.

    Private Browsing can be found in the lower left hand side in Safari. It just says "Private". I'm not sure what to tell you about the mail issue. You might
    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • After last upgrade Apple TV 3 blue dots not disappearing after podcast is watched. How do I fix?

    After last upgrade Apple TV 3 blue dots not disappearing after podcast is watched. How do I get them to disappear like they always have?

    That crash appears to be casued by the Facebook plug-in.
    Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

  • Cant open my ipad 2 after i upgrade it to IOS 7.1 what will i do

    i cant open my ipad 2 after i upgrade it in IOS 7.1 what should i doipa

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Ipad mini, after ios7 upgrade if turn off the mobile data, my carrier gets turned off and wifi doesnt work at all. Its slow and app store crashes everytime. Help me to gowngrade to ios6. This really *****.

    Ipad mini, after ios7 upgrade if turn off the mobile data, my carrier gets turned off and wifi doesnt work at all. Its slow and app store crashes everytime. Help me to gowngrade to ios6. This really *****.

    Tap Settings > General > Reset > Reset All Settings
    Then restart your iPad.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
    Then press and hold the Sleep/Wake button until the Apple logo appears.
    Downgrading is not an option for an iOS device.

  • Displaying bash-3.2$ in terminal [NOT-SOLVED after last upgrade]

    hello, I have this same problem: http://bbs.archlinux.org/viewtopic.php?id=39192 but the "solution" posted there does not help me at all, I wish I could reuse the old thread but the 'SOLVED' keyword in the title may be confusing so I'm starting a new one.
    the problem is that the prompt of my terminals (konsole, yakuake, xterm) is PS1='\s-\v\$ ' in all users; this started to happen after the last upgrade when the profile mechanism was changed somehow, I have no PS1 in my .bashrc and the PS1 in profile.bash is PS1='[\u@\h:\w]\n\$ '.
    an interesting thing to know is that the virtual consoles (the ones accessed with Ctrl+Alt+F[1-6]) have the right prompt, and sourcing /etc/profile also fixes the problem on the others so I'm guessing that some other configuration file (possibly KDE or X related) is overwriting my prompt but I can't find it! fgrep -R 'PS1' /etc/profile* only shows the one I set not the wrong one.
    /etc/profile and /etc/profile.bash are being loaded since the other declarations are present as well when running `set` only PS1 has changed it's value.
    any help is appreciated.

    still searching, first of all some tests I've made with the help of the guys at #bash
    [11:33] <`Samus_> guys is it possible that starting X somehow erases my prompt?
    [11:33] <`Samus_> I know that's is not purely bash and maybe OS-specific sorry
    [11:33] <`Samus_> but it's geting me nuts
    [11:33] <{xmb}> cant find it
    [11:34] * Vadi ([email protected]) has joined #bash
    [11:34] * Vadi ([email protected]) has left #bash
    [11:34] <pgas> `Samus_: where do you define your prompt?
    [11:34] * albech ([email protected]) has joined #bash
    [11:35] * Agiofws has quit (Remote closed the connection)
    [11:35] <`Samus_> is bieng defined in /etc/profile (/etc/profile.bash really but it-s sourced from there) there-s no PS1 in .bashrc and the rest of the variables are set
    [11:35] <`Samus_> the most weird part is that in the virtual consoles (Ctrl+Alt+[1-6]) is ok
    [11:36] <{xmb}> smells likke a code fault
    [11:36] <`Samus_> but everything under X not
    [11:36] <pgas> what if you do bash --login in xterm?
    [11:36] * Oper_ ([email protected]) has joined #bash
    [11:36] <`Samus_> let's see
    [11:37] <`Samus_> bash --login shows it ok
    [11:37] <`Samus_> in fact resourcing /etc/profile fixes it too
    [11:38] <{xmb}> code fault something where
    [11:38] <pgas> ok, so one of the script starting X sets PS!
    [11:38] <pgas> you are on debian? have you checked /etc/bash.bashrc ?
    [11:38] <`Samus_> that's what I think but I can't find it
    [11:39] <`Samus_> no I'm on archlinux
    [11:39] <pgas> what if you type just "bash" in a terminal?
    [11:39] <`Samus_> and it might be some mistake because it started to happen after the last upgrade
    [11:39] * floyd_n_milan ([email protected]) has joined #bash
    [11:39] * hark ([email protected]) has joined #bash
    [11:40] <`Samus_> 'bash' shows the wrong prompt, 'bash --login' the right one
    [11:40] <pgas> in a terminal with the correct PS1 that is
    [11:40] * osfulgore ([email protected]) has joined #bash
    [11:40] <`Samus_> oh, in a terminal with the right prompt it stays ok
    [11:40] * `Samus_ fells kinda lost...
    [11:41] <pgas> ok, so the problem seems to be in one of the script used to start X
    [11:42] * prince_jammys has quit ("Konversation terminated!")
    [11:42] * Oper_ has quit ("Íå çíàåòå Äàíèëà Áåðåíöåâà? Îí ñêîðî âñòðåòèòñÿ âàì! Íå ñëûøàëè òàêîãî àâòîðà? Äîñòàíüòå ïðÿìî çàâòðà!!!")
    [11:42] * Oper_ ([email protected]) has joined #bash
    [11:42] <`Samus_> grepping 'PS1' in /etc/X11 didn't showed anything
    [11:42] <`Samus_> some clue of what should I look for (or where)?
    [11:43] <pgas> startx? ask #archlinux?
    [11:43] <`Samus_> going...
    I've also tried different WMs (KDE, xmonad) and they have this same problem but then, "fgrep 'PS1' /usr/bin/startx" and "fgrep -R 'PS1' /etc/X11/" showed nothing!! now what?
    truly wtf...

  • My 4s seems different after last upgrade

    should my 4s be any different after this last upgrade. My calander sound will go off but when I open it the sound will not shut off. My autofill is not always working

    Do the basic troubleshooting steps described in the User Guide, Appendix B:
    Restart, Reset, Restore

  • IPad Problem Since Last Upgrade

    Since last upgrade, safari will just shut down, for no apparent reason. Very irritating! Thoughts? Suggestions?
    I also have problems in FB with it showing Access Denied ... On some videos. Never had this before.

    restart the ipad http://support.apple.com/kb/ht1430
    restart the appletv
    restart the router

  • After last upgrade my itunes album covers dont match the songs.  any ideas why?

    after last system upgrade, the album covers do not match the music.  I called apple, they walked me thru something that did NOT work.  I delete the music, then readd...get the song with dotted circle....what does this mean??  The info is correct in my itunes under get info and then album art work.....

    Did you select the playlists to sync in itunes under the music tab?

Maybe you are looking for