IPad fully charged symbol at 2% and does not charge.
Hello.
My iPad will not charge past 2%, and it's constantly restarting as if it just doesn't have enough power to stay on. I've checked the actual charger, used different ones, but this does not help. I've restarted, I've even backed up, erased and restored everything to start all over again but the problem still persists.
I think I already know the answer, but is there anything else that anyone can recommend? Any other suggestions?
Please help.
Thanks,
Rich
I thought I should add an update to my problem... After leaving my iPad for about a month or two it just suddenly started working again. In fact I'm writing this ménage on my iPad right now.
Thanks for all those (2) that replied.
Rich
Similar Messages
-
My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
IPad 2 stuck in recovery mode and does not respond to usual cures.
I wonder if anyone can suggest what further I can do to get an iPad 2 16MB WiFI model out of recovery mode. The machine was previously working normally but after a charge would not turn on. It connected to iTunes on a Windows system when started using the home button press before USB plug method. iTunes reported the iPad in restore mode even though the diagnostic tools menu in iTunes said that the ipad was not connected. The Windows system device manager showed that the Apple USB driver was loaded but did not show the iPad as a device. However, running restore from iTunes seemed to work correctly with the progress bar showing on the iPad and the information bar on iTunes showing installation of software and firmware. iTunes then said that the iPad would restart - but it did not. It just stayed in restore mode. A new USB cable made no difference and the same thing happens when I repeat the attempted restore on another Windows system. I have done the attempted restore multiple times as has been suggested is needed. I also let the battery run flat before doing restore attempts. Both Windows system were cleaned of everything non essential and the iTunes is up to date. Doing the restore from DFU mode gives the same result. I have occasionally had the error code oxe8000084 reported by iTunes. Am I dealing with a hardware fault?
This is the error report from iTunes which despite saying that device connectivity fails - seems to be able to see what is on the iPad.:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Acer Aspire 5732Z
iTunes 11.1.0.126
QuickTime 7.7.4
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00E0BDA80A765FC0
Current user is not an administrator.
The current local date and time is 2013-10-06 17:13:18.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
(Standard display types), Standard VGA Graphics Adapter
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {EA4D900B-F6D1-4672-854A-C64A3F3650C1}
Description: Broadcom 802.11n Network Adapter
IP Address: 10.0.0.5
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.0.138
DHCP Enabled: Yes
DHCP Server: 10.0.0.138
Lease Obtained: Sun Oct 06 18:01:20 2013
Lease Expires: Sun Oct 06 19:01:20 2013
DNS Servers: 10.0.0.138
Adapter Name: {FE6F70C0-1133-45C5-B4EF-D9BF04CE4923}
Description: Atheros AR8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 02:00:00 1970
Lease Expires: Thu Jan 01 02:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-10-03 18:21:08.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D: Slimtype DVD A DS8A4SH, Rev CA11
Drive is empty.
**** Device Connectivity Tests ****
iPodService 11.1.0.126 (x64) is currently running.
iTunesHelper 11.1.0.126 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
Standard Enhanced PCI to USB Host Controller
Standard Enhanced PCI to USB Host Controller
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPad 2 running firmware version 7.0.2
Serial Number: DN6G8MG7DKPH
**** Device Sync Tests ****
No iPod, iPhone or iPad found. -
My iPad Mini has a black screen and does not respond to anything.
I got my iPad Mini 6 days ago, and this morning I woke up to it overheating (to a point which any contact with it, or the case) was painful. Along with this overheating, the screen was and still is black. The iPad is not responding when I try to turn it on, off, hard reset it, etc.. It has not been taken off charge in approximately 6 hours, so I highly doubt lack of battery is a reason.
HElp, please. And thank you in advance.Time to make an appointment with Apple.
-
When attempting to update my iPad from iOS 5.1.1 to iOS 7, I continue to get the message my software is up to date instead of getting a download prompt for iOS 7. Anyone else experience similar issue? If so, how do I resolve?
You can't resolve the issue, because the original iPad can only be updated to iOS 5.1.1 and no further.
-
Whenever sound comes through my iPad 4 it is really blury and does not sound good at all please help
Please help the sound is deep and when i play the same thing at the same time on another device it sounds completely fine and normal
Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset. -
while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?
Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808 -
Why does ios7 not let my ipad fully charge?
Ios7 seems to not let my ipad fully charge... Restart does not help. Any ideas?
Why do you think it is not letting it fully charge? What, exactly, are you seeing?
GB -
genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge - went to Apple in Milton keynes to get a replacement charger this weekend that does not work as well!
Well, if this problems is so old I think it is strange that Apple hasen't fixed the bug long time ago, and certainly after the release of iOS 8.1.
Well, thank you very much for your answer, Lawrence Finch. I think the best thing to do is to send the phone to repair, if there is no solution to fix this by my self. I will anyway call the Apple support tomorrow, but I don't think they will illuminate me... -
My IPad connects with my hotel wifi, but does not indicate that it is a secure wifi, even though it requires a password to access - no lock symbol appears against the wifi network, hence no password request, hence no internet access - help. My collegue who also has an Ipad can access the same wifi with ease, so it must be something to do with the settings on my machine, although checking the two machines, there appears to be no difference in the settings.
My experience with hotel wifi is that it's an open, and unsecured, connection, but unless you agree to their terms on a launch page, you can't go any further or connect. Sometimes I need to force safari to come up and even make it go to a page, to trigger the auto load of the 'agree to our terms' page.
Unless your machine is work provided so maybe could be blocked from unsecured net access? -
My IPad just shut down and does not want to start again?
My IPad just shut down and does not want to start again....what can I do?
Assuming that the battery isn't empty (it can take up to 10 or 15 minutes charging before it responds) then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
IPhone 3GS no longer recognized in iTunes and does not charge via wall
I upgraded my iMac to iTunes 9.2 when it came out.
My wife then upgraded her iPhone 3GS to iOS4.
Since then it is not recognized in iTunes and does not charge via the wall adapter.
I realize this topic crosses over with several ongoing discussions, but there are no 3rd party peripherals involved here.
The only major changes to our set up have been the itunes and iOS upgrades.
The battery is running down, any ideas to fix this, or other similar experiences welcome.Went to the Apple store and they replaced the cable.
-
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Do you have to use PhotoStream to do this?
How did the photos that you want to copy off get on the iPad ? To copy photos to your computer that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites then see this page - on a Mac you should be able to use iPhoto, Aperture or Image Capture
To copy photos that were originally synced from a computer you will need a third-party app on your iPad such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer. -
Admission charge my iPod is turned a corner, and Does not want to load composure?
Admission charge my iPod is turned a corner, and Does not want to load composure?
Could English not be your native language since you question does not make sense? If so try posting in your native language. Otherwise clarify.
Maybe you are looking for
-
Change message on the Purchase Order from a warning to an Error
Dear all, I am working in a global client and I would like to change a specific message (06205 - Effective price higher than material price > 20%) from a warning to an error but only for some specific users. I know that a message can be changed to an
-
Power Cord for HP Photosmart D110
Where can I buy a Power Cable for the HP Photosmart D110 Printer? .... Thank you for your reply to [Personal Information Removed]
-
Can anyone tell me how to trash pictures in photostream (w/icloud)
can anyone tell me how to trash photos in photostream. on a macbook pro w/icloud
-
Jdeveloper - setting default window geometry under x-window
Hi When I run JDeveloper (9.0.4) it creates its main window (of some size) in the center of the screen. It's fine, but... I'd like to have JDeveloper create its main window of different default size and located at different position when I start it.
-
Printing through J1IV automatically goes to spool
Hi Experts, I am trying to print excise invoice through 'J1IV' (output type ZEXC, copy of JEXC). But, when I press the print button after selecting the invoice, the output automatically goes to spool. Is there any configuration we need to maintain to