IPad guest users cannot see YouTube videos but Android devices can

Hi all,
I am in the process of moving a guest SSID from a local Wireless LAN Controller to it being anchored for security reasons to another WLC in the DMZ. I have created a test SSID which is anchored in the DMZ and have found that everything is working perfectly except for YouTube videos. While those guest users that are connected on Android devices can watch YouTube videos just fine, those connecting via iPads or iPhones are unable to watch these videos. Any ideas?
Thank you in advance for your help.
rgrds,
inayat

Hi George,
Thank you for your reply.
I did two packet captures: once with a working Android device and once with a failing iPad. There did not seem to be any difference in packet sizes when trying to download a YouTube video (both seemed to be around 1368 bytes per packet). The packet capture with the failing iPad showed a number of TCP resets and attempts to connect to 224.0.0.251 MDNS) - that seemed to be the only difference with the packet capture from the working Android device.
What I did notice when looking at the existing local WLC (from where the iPads can successfully connect to YouTube - remember that they are failing when they are tunnelled to a test SSID in the DMZ) the local WLC contained a Layer 3 MGID for 224.0.0.251 with a number of users in that group which were iPad users. When I looked at the anchor WLC in the DMZ it did not have this MGID listed - or any other Layer 3 MGID for that matter.
Your comments and ideas please!
rgrds,
inayat

Similar Messages

Guest users cannot see or connect to shares on Snow Leopard 10.6.1

I recently upgraded to Snow Leopard from 10.5. After upgrading, users connecting as "guest" to my computer cannot see any of the shares (and therefore cannot connect to them).
If I connect as my administrator user from another computer, I can see all the shares, as well as all the volumes.
I have verified that the Guest Account is enabled (Allow guests to log in to this computer) in the Accounts preference pane, and of course File Sharing is turned on in the Sharing pane, and all the shares are listed with the correct permissions.
This is a very strange and perplexing problem. Any help would be most appreciated!

If they are connecting as a registered user they can see all the shares....but as a guest they cannot...I'm trying to find what might causes that problem....I really cannot think any logical reason... Everything in my options seems to be ok... So after the 10.6.2 update your problem solved ? I think that you were very lucky man...If you find any answer to that problem please let me know...
Anyway,Thank you for your reply!

HT204291 i cannot see the video but i can heard

i heard the show but i cannot see the image

Is your version of Skype known to work with your operating system version?

Facetime users cannot see my video on ipad

When I call someone on face time on ipad2 I can hear and see them but they can only hear me not see me . Any answers
yeffahem

Does the camera work ok for taking pictures? For face time you are using the front camera, the little black dot. My mother in law holds the padmwith her thumb over the camera all the time...
If you are sure the camera works, then doulbe click the home button to see the task bar. Touch and hold any of the apps until they jiggle, then delete them all by touchimg the minus sign.
Then hold the home and sleep button until the apple logo appears. Ignore the red slider. This total reset often clears up problems with apps.

My Windows 7 PC can't connect to Internet or see base station but wifi devices can?

I set up my airport extreme a week ago and configured it in my pc. Now my pc won't find the base station and I have no Internet access on my pc but all my wireless devices are fine. I've checked the cable. Please help

Hi - is your PC telling you that a network cable is unplugged or that a webpage cannot be found or both?

I cannot see any video ( youtube etc ) on firefox. Using mac osx 10.5.2. All other browsers OK.

I cannot see any video ( youtube etc ) or anything with video when using firefox 4.0.1. I am using a macbook running mac osx 10.5.2. This has suddenly occured but I can get video on safari 3.0.4 and Chrome so I know its not my laptop. Have not changed any settings recently.

I cannot see any video ( youtube etc ) on firefox. Using mac osx 10.5.2. All other browsers OK.
I cannot see any video ( youtube etc ) or anything with video when using firefox 4.0.1. I am using a macbook running mac osx 10.5.2. This has suddenly occured but I can get video on safari 3.0.4 and Chrome so I know its not my laptop. Have not changed any settings recently.

With ios 7.03 I cannot expand youtube videos to screen size but get white blanks all around the stream

since the update to ios 7.0.3 I cannot expand Youtube videos to screen size - instead, the features around the video dissappear and are replaced by white fields. With my ipad mini I do not have that problem.
Does anybody know advice?

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings

I have a application installed in my apps folder but others users cannot see them

I installed an app on my imac using OSX Lion. The app is in the application folder of the admin account. The other standard users cannot see the app. Is there a way that they can use the app and see it in the application folder when they log in?

Then move it into their application folders as well.

Cannot play youtube videos

I cannot play Youtube videos on my MacBook Pro. I am using Safari. I checked to see if Google had signed me up in their test program and I am not. The apple store upgraded flash.
Any ideas?

If you are trying to view YouTube content from Safari, that requires Flash which cannot be installed on an iPad.
A workaround would be to download the You Tube app > YouTube for iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod touch (3rd generation), iPod touch (4th generation), iPod touch (5th generation) and iPad on the iTunes App Store

Takes too long buffering on you tube, cannot see some videos at all.

Takes too long buffering on Youtube, cannot see some videos at all. Have gone out of youtube and come back in again. have restarted the computer several times. Have come back later and tried again with the same results.

I don't have this problem - but a bunch of other people have youtube problems since upgrading to Yosemite.Yosemite 10.10.1 causing Safari not to play YouTube videos...

Standart Portal User cannot see Website created with WPC?!?

Hi there,
just a new Question.
I created a Website with WPC as shown in this Blog:
https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/5924
Web Page Composer u2013 how easy it is to create and publish a web page (Part III)
I created also a User that have rights:
Groups:
Everyone
Authenticated Users
Roles:
Testrole (That one i created for the Website)
But my user cannot see the Website after Logging in.. In the Menu there is a Menuentry called: Website
Thats correct. But the Site do not load.
After i put the User in: Group - Administrators i can see the Website... whats wrong here?
Regards
Bjoern

OK i am a step forward.
i checked help.sap.com and find a hint to the Security Zones.
Defining Permissions for Security Zones
1. Navigate to Security Zones ® com.sap.nw.wpc ® wpc.
2. In the context menu of the following folders, choose Open Permissions and define the permissions specified.
Permissions for Security Zones
Folders
Roles/Groups
Permissions
medium_safety
Site owners, editors, and authors (for example, the wpc_editor_role role)
Select the End User checkbox.
You can leave the default entry for the Administrator column as None.
no_safety
Visitors (for example, the everyone group)
Select the End User checkbox.
You can leave the default entry for the Administrator column as None.
I changed the no_safety (i added Group - Everyone)
Now i can see the Page.. but i also see at the top right of the page: EDIT PAGE
And a Standart EndUser should not see: Edit Page
What can i do here?
Regards
Bjoern

I connected my iPad to my iMac and in iTunes I went to Apps File Sharing and added a video on my iMac to iPhoto on the iPad. I cannot find the video that I added to the iPad. I looked in iPhoto and the camera roll. Any ideas? (BTW, this is a video whi

I connected my iPad to my iMac and in iTunes I went to Apps > File Sharing and added a video on my iMac to iPhoto on the iPad.
I cannot find the video that I added to the iPad. I looked in iPhoto and the camera roll. Any ideas? (BTW, this is a video which I previously had on the iPad but deleted and now I want to add it back.)

Thanks for your reply. I looked in the Video app but it is empty. When I connect the iPad to iTunes on the iMac and look in Apps > File Sharing > iPhoto, the video that I added is in iPhoto on the iPad but I cannot actually find the video in iPhoto on the iPad.

New Jabber user cannot see (only) one of the added buddies

Running ichat server, just a handful of OD users. OD is on the same machine as Ichat server. Nothing is limiting the use of Ichat by any of the OD users. Server G5 10.4.9, Clients managed Intel Imacs 10.4.9
Added a new user.
New user can add buddies in the Jabber List.
New user can see all but 1 of them in the List.
One of the buddies, lets say UserX, can see the new user in her Jabber List.
No matter what we have tried from within Ichat the new user cannot see UserX.
Both users are members of the same groups and have matching access abilities.
Any suggestions. Thanks for looking at this.

New user can see all but 1 of them in the List.
If I understand it this correctly, 'new user' can see all other buddies except one. And all the other users can see this buddy.
Lets call the new user "userX" and the one they cannot see "userY" and lets call your ichat server "jabber.myserver.com"
The configuration files for users buddylist is stored in the spool di rectorywhich you can find at /var/jabber/spool/. In there you will find a directory the matches the name of your ichat server. For me that is jabber.clayford.com. In this directory you will find one xml file for eash user of ichat server. Their file name is the OD logon name for the server.
Stop the ichat server service and make back up of any files you edit before you start.
Open the file for "userX.xml" In this file you will see some xml code that starts <item jid='[email protected]' subscription='xxxxxx'>. there will be a number of them, one for each buddy.
Mke sure the xxxxxx is the word 'both' [with the quotes] and if the text ask='subscribe' exists in that line before the >,remove it. So that definition should now be: <item jid='[email protected]' subscription='both'>.
Save the file and now open the file userY.xml and check that the item <item jid='[email protected]' subscription='both'> exists.
Restart the ichat server and the problem should be fixed...

One user cannot see Inactive Addresses in Account Overview

One user cannot see Inactive Addresses in Account Overview in the CRM 7.0 IC.
This user has the same roles and authorizations as all the other users.
We have also performed a user comparison in CRM and ERP and have also reset the user buffers in both systems.
If I copy the user to another user in CRM and ERP the copied user can see the Inactive addresses. A user comparison shows that the user and copied user are identical.
Any ideas?
Aubrey Smith

Just a gamble, but check his user parameters in SU01.

User cannot see tax amount while creating PO

Hi All
My user cannot see tax amount while creating PO but on displaying the PO after saving he can see the tax amount in the PO.
Is there any authorisation issue or what is the proble

Please check the autorixation. Take the screen shot of /nsu53 and contact with BASIS person
regards

IPad guest users cannot see YouTube videos but Android devices can

Similar Messages

Maybe you are looking for