IPad has no sound except with headphones?

I've tried all the  suggestions, pushing/pulling the jack in and out, backed up my iPad and then reset to factory setting and restored it, toggled the controller button between orientation and mute, hit the home button twice and closed all the apps running...I'm running out of options.   I am still under hardware warranty.  I bought it from Best Buy, should I take it back there, or to an apple store?

Clean iPhone charging port with clean dry toothbrush. See if better. If not, clean again with toothbrush and small amount of Isopropyl Alcohol. If still problem, faulty part could still be iPhone charging port with attached flex cable.

Similar Messages

  • My iphone 4s no longer has any sound expect with headphones.

    My iphone 4s no longer has any sound expect with headphones. I have cleaned the head jack and dock connector, restarted, and reset the phone. This occurred after updating to ISO 6. What else can be done? Thanks!

    If you are near one, make a reservation at the Genius Bar at the Apple Store.

  • Ipod Touch 4th gen has no sound except when headphones are plugged in

    I have checked sound settings, reset the ipod, powered off, and synced it.  Still no sound except when the headphones are plugged in.  Any ideas?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • 4s no sound except with headphones....no tricks worked yet ??? anyone?

    no sound atall unless headphones are inserted?

    Clean iPhone charging port with clean dry toothbrush. See if better. If not, clean again with toothbrush and small amount of Isopropyl Alcohol. If still problem, faulty part could still be iPhone charging port with attached flex cable.

  • No Sound except through headphones

    I have an Envy Phoenix 810 PC with an Envy 23 Monitor with built in speakers running windows 7. I can test sound on the computer with headphones and they work and I can test the internal speakers on the monitor and they work but I cannot get any sound externally without headphones. I called hp support and really got the run-around. This is the same problem with my home computer same configuration except it is running windows 8.1. Both computers are new but I am frustrated with this issue. HP support had me run system recovery on my computer at home with no success. Another support person reinstalled all the drivers but still there is no sound except with headphones. Do you have any suggestions? I have a jack plugged from monitor to computer.

    Hi,
    Envy Phoenix 810 PC is a series of many models/products, what is yours ? How do you connect them ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hi.bag of my ipad has a magnet that with it the lid closed, is this harmful for ipad??(software or hadware). thank you.

    hi.bag of my ipad has a magnet that with it the lid closed, is this harmful for ipad??(software or hadware). thank you.

    No. There are magnets in the iPad as well. Try the right side of the screen, around the midle point.

  • HT1766 Have sound only with headphones after apples new IOS install, any help would be appreciated.

    Have sound only with headphones after apple latest iOS install, any help out there?   

    http://support.apple.com/kb/TS2802

  • Can i connect my ipad 2 (ios 6.1) with headphones sony mdr-1rbt bluetooth?

    can i connect my ipad 2 (ios 6.1) with headphones sony mdr-1rbt bluetooth?

    According to the Sony Web page for those particular eaphones, no. They aren't compatible with iOS 6.  Only iOS 5 and below.
    http://esupport.sony.com/US/p/model-home.pl?mdl=MDR1RBT&template_id=1&region_id= 1&tab=howto#/howtoTab
    Sony wrote:
    Are the headphones compatible with the Apple® iOS®6 operating system?
    Solution
    The headphones are compatible with Apple iOS5 and lower. They are not compatible with the Apple iOS6.
    Region
    Canada
    United States
    Products
    MDR1RBT
    Last Modified Date:12-05-2012ID:C1032819
    You can still try though, but there's no guarantee.

  • My ipad 3 does'nt sound only with headphones

    my ipad 3 wifi doesn't sound only with the headphones it sound all aplications, my ipad have only 20 days of purchase

    I am trying to understand your post but it is a bit difficult for me to interpret exactly what you are saying - and the point of confusion for me is where you seem to be saying that apps DO have sound. If that is true, that would rule out systems sounds being muted.
    However - did you check to see if you have system sounds muted. You can flip the side switch and see if the sound returns or double tap the home button and swipe to the right in the task bar at the bottom and check the software switch all the way to the left.
    If your iPad is less than 3 weeks old, I would make an appointment at an Apple Store Genius Bar and ask them to evaluate your iPad. Something is obviously wrong with it and if they cannot get the speakers to work properly, they will replace the device.

  • YouTube sounds stutter with headphones in iOS 7

    In iOS 7 with my iPad 2, YouTube's sound is stuttering, sometimes completely missing. This only happens with headphones, the device speaker works fine. Also, most other web players work, so this only applies to YouTube. What can I do?

    I wonder if you have the same issue I and others have.  For us, it always happens when resuming something using the button on the mic of the apple earbuds or earpods.  The audio will start, then stop after a fraction of a second.  Then once we press the resume button again we get stuttering.  Removing and reinserting the headphone jack will always fix it.  Does this sound like you?  If so, it's an apple issue that seems to be minor enough that it will never get fixed.  Has been around since at least the introduction of ios5 and reported on many versions of apple hardware.

  • No sound except when headphones plugged in

    I just noticed that there is no sound on my phone except with earphones. The phone calls but I can't hear anything. I just started noticing this today. Alarm and timer sounds are okay.

    I have had this problem more than once, and from what I can tell it comes from unplugging headphones while playing music, talking on the phone or some combonation of all. What I have done to fix this is do just that, play music without headphones, plug them in, unplug them, play again etc. Just go through every possible combonation you can think of. Also if you use an fm transmitter that plugs into the docking port, then you need to use that in your tests as well. I can't tell you the right combination, cause I don't know excatly what it was to fix it, but this has happened to me twice, and I got sound back after both times.

  • My iPad has no sound

    My iPad has no sound

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • Sound only with headphones

    I have sound when I use headphones but when I unplug them, I lose sound and several apps tell me me i have no volume.  If I hit the home button twice the vloume bar comes up and it functions properly with headphones. As soon as I unplug the headphones the volume bar disappears.  Everything worked fine until I installed splashpoint. I have delted this app and stilll don't have sound.

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085
    If this did not solve the issue - restart or reset your iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • My Ipad has lost sound

    So my Ipad, 3rd generation, has lost sound.  The volume controls have dissappeared on the task bar, the mute button is not switched on.  But when I use the side button for volume control, I just get the little messgae sound effects.
    When I switch the mute button off and on, it shows full volume, or what ever volume I set it at using the little bar in the settings menu for sound.
    I get volume after restating my ipad and entering my password, but then it's gone.  I also get sound, when I ask Siri, and she talks when ask her a question. I have even restored the ipad software, but what ever is causing the problem is being reinstalled when the back up loads.
    How can I can fix this?  Is anyone one else having this issue?

    There have been a number of people that have talked about this same issue for weeks now. I have no idea what causes it, not have I seen anyone say that something specific fixed it. If you restored from a backup - like you said yourself - you could be restoring whatever glitch in the settings causes this to happen.
    Have you tried resetting all settings? Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
    I reset all of my settings yesterday because I was trying to fix a really weird issue with my Automatic Time Zone setting. It seemed to fix the issue for me. I don't know of it was just a coincidence or not, but it is working properly again for me now.
    You will have to go through all of the settings in the settings app and set everything up all over again. You will have to join your home network again. You will have to allow access to all of the apps in the Privacy setting, enable Siri again, Select your custom wallpaper again, reset your brightness level .... All of that stuff.
    If that doesn't work, then the next step would be to restore as new and see if the volume comes back, then start adding all of your content back to the iPad.

  • Hello,  my ipad has never been paired with any computer.  My PC is ready to die and iTunes will not upload on it.  My iPad is insisting that I connect to iTunes and I can't get out of that screen.  How can I use my iPad without syncing it to iTunes?  Than

    Hello,
    My iPad 2 has never been "paired" with any PC.  My one and only PC is corrupted and will not, after many many attempts, download iTunes.  When I turn on my iPad it insists that I connect to my iTunes.  How can I avoid this and just get the iPad to work like normal?  Any help is much appreciated

    You cannot do anything with the iPad until you do as instructed by the iPad and connect to iTunes on a computer.
    You probably need to restore the iPad and the only way to do that is via iTunes on a computer.
    Take it to an Apple Store and ask for help at a Genius bar or take it to a friend's house that is running iTunes on their computer and try to restore it.
    You will lose all of your data and settings now because you never backed the iPad up in the past.

Maybe you are looking for

  • NFe de entrada no GRC

    Pessoal, aqui no cliente existe uma categoria de NFE ex: IK. Sempre que eles fazem entrada nessa NFe, ela tá indo pro GRC. Vcs sabem o que pode ser? Existe alguma maneir, mesmo errônea do usuário enviar essa nfe pro grc? Já que essas NF-e de entrada

  • Not able to Parse XML data in Sun Application Server 8.2

    Iam not able to parse the xml data in sun application server,this is working fine in tomcat and oracle server. Please go thru the code , thanks in advance.This is used in ajax. function processStateChange() { if (req.readyState == 4) { // Complete if

  • External field addition in smartforms

    Hi dis is vinod.I want information regarding adding a field in smartform without disturbing actual print program as we can do in scripts using 'ITCSY' structure ie using subroutine.can we add a field like that or not.If so how can we go ahead. Thanxs

  • Problem integrating Weblogic 6.1 (SP2) with Bowstreet4.2.1

    I have installed weblogic6.1 with SP2.I have installed bowstreet 4.2.1. On starting the weblogic server I get stringindexoutofbound exception when it tries to load bowstreet. I have put in the following jars in the weblogic classpath in the given ord

  • Output from same script on two different platforms produce different outputs.

    I'm running a command prompt script on two different platforms (Windows 7 desktop and a Microsoft Server 2008 R2 Enterprise platform) and the output the script produces is different on each platform.  Specifically; the script is        For /f "tokens