Ipad has stopped charging properly

My Ipad has always charged really quickly. I am using an apple plug & wire not an imitation. I tried a new wire & that is the same (again a genuine apple product) both wires charge my iPhone 5s really quickly & previously i have found the same with my ipad but since the last update it's just like it is draining too quickly. Even being charged overnight it only charges to around 50 - 70%. Put it in airplane mode to charge it quicker because i read it helps but that only got it to around 90% overnight. I have tried everything i can & haven't downloaded anything new & have stopped everything running to see if it's an app causing the problem. Please can anyone help. I have tried to chat to someone from apple but it's asking for £25 which i think is disgusting with how much my ipad cost me.

sometimes it can be little things like notifications - settings>notification center - go to include section and anything internet related click on the icon for the app - and turn off show in notification center - these things may possibly be trying to connect to internet several times a day looking for stuff to notify you about - make sure that you quit out apps which it sounds like you do - double tap home and swipe up on the windows - make sure bluetooth is off when not in use - a bad wifi connection can overwork it too

Similar Messages

  • Help my ipad has stopped charging, it does charge but very very slowly, like 1% an hour

    My ipad has suddenly stopped charging, I've tried different leads and plugs but nothings working

    How are you charging it? It's charged best with its supplied power brick plugged into the wall. If it's a full sized iPad they do not charge well off USB ports.
    If you're doing that, try giving your iPad  a rest. Hold down the sleep and home keys until you see the silver apple. Let it reboot and try again.
    If the issue persists, swap out the power brick, cord, outlet to confirm or rule out those parts as being the issue. If it continues beyond that then you may have something wrong with your iPad and you should make an appointment at your local apple store to have them check it out.

  • HT4060 My ipad has stopped charging

    I was at my friends house and my iPad would not charge but they were having power surges so I put it down to that. The next morning I went to my grandma and grandad's where I also toyed to charge my iPad but then I realised there was either something wrong with my iPad or the charger I've been researching and I've found a quote saying that you shouldn't leave your iPad on charge through the night I was not aware of this and I have reason to think that, that could be the fault.

    Troubleshoot
    1. Try a reset
    2. Clean docking port with clean tooth brush
    3. Try another wall socket
    4. Try another cable (make sure it's an original Apple cable)
    5. Try another charger (make sure it's an original Apple charger)

  • My iPad has stopped charging

    my ipad 2 has suddenly  stopped taking a charge! i have tried different chargers and different plug points, it shows having a connection but dispite bieng left connected overnight it  has not gained any charge. I have recentley taken the new update could it be this, I had zero problems with my Ipad before!
    help of course I am 1 month past my warranty!!

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414

  • My Tungsten E2 has stopped charging properly.Can the internal battery be replaced?

    Post relates to: Pre Plus p100una (AT&T)

    Or you can call one of the many online repair sites who will do it for a fraction of what Palm charges!
    www.directfix.com
    http://www.palmdr.com/cart/
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • TS3274 My iPad has stopped finding any wifi networks

    My iPad has stopped finding wifi networks

    Check to see that you are using the cable and charger that came with the iPad, especially the charger itself. If you are trying to charge using the PC, it's USB ports are likely not capable of delivering enough current to properly charge the iPad.

  • My ipad2 has stopped charging. Have replaced cable and adaptor without any help. Looks the internal dock connector has got damaged. What do i do? Its only 18 months old.

    My ipad 2 is 18 months old and has stopped charging. Have reolaced cable and adaptor without any help. Looks internal dock connector has got damaged.  What is the solution.

    It'll be an out of warranty replacement since accidental damage isnt' covered by the factory warranty.
    http://www.apple.com/support/ipad/
    contact support and make an appointment at your local apple store. The out of warranty replacement fee for an iPad 2 starts at 249 and goes up. So another option for you may be if your money is better invested in a new  device that will have a longer life.

  • My iPhone 5c has stopped charging what should I do

    Either my iPhone 5c has stopped charging or both of my chargers are broke please help me

    There's no FaceTime icon and no app since it's built-in.
    All you need is Wi-Fi and a connection to another iPod Touch 4 Gen, iPad 2, iPhone 4 & 4S and Mac
    Go to your contacts and find a friend that also has the Apple devices and Wi-Fi then tap faceTime. 

  • A magazine's app on my iPad has stopped working.  When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem.

    A magazine's app on my iPad has stopped working.  When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem, and this magazine's app opens just fine on my wife's iPad.
    I have deleted the app and reinstalled it from the Apple store and that makes no difference.  I have also done a hard reboot on my iPad with no result.
    Any thoughts about what might be wrong? 

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • I get the following message: Mozilla Firefox plugin-container has stopped working properly. What do I do?

    the message:" Mozilla Firefox plugin-container has stopped working properly" appears regularly in my maintenance center. I am on Windows 7 and Firefox 3.6.17

    I had the same type of failure. It was caused by a FF upgrade from V4 to V9.1. Dearing 1955 did not say what version caused the problem. My USB ports started acting up. I could not install the Webcam that was installed before. The HP Scanner of my OJ 8500 stopped working (USB). Did get it to work via Wireless. Removing FF did not clear the problem. Believe I have infected USB driver now.

  • ITunes has stopped working properly.

    iTunes has stopped working properly.

    Ok.
    3 days ago, for no apparent reason my itunes stopped working.
    This only happens after it has "synced" with the itunes store and prepares to upload remaining songs.
    NOTHING has changed since then other than downloading latest itunes (11.1...whatever) which i was recommended to do after it stopped working.
    I am using windows 7
    Latest itunes version (for windows)
    I have thousand of songs in icloud, which were uploading fine until 3 days ago.
    Windows message reads something like: Itunes has stopped working properly, windows will now close the programme blah blah balh.
    Bit annoyed.  Tried copying the dll file from QT that somebody mentioned earlier. Also tried "repairing" programme and re-downloading update.
    Not working still!!!! HELP PLEASE!!!

  • Mozilla Firefox plugin-container has stopped working properly

    Mozilla Firefox plugin-container has stopped working properly. FOR THE UMPTEENTH DAMN TIME... HOW DO I FIX THIS on Firefox 3.6.13!?!?!?!?!?!?!?
    ''edited by a moderator - https://support.mozilla.com/en-US/kb/Forum+and+chat+rules+and+guidelines ''

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]
    See also http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

  • Clone tool has stopped working properly, the sample area doesn't follow the target area?

    Clone tool has stopped working properly, the sample area doesn't follow the target area?

    I understand. I was very unhappy with Adobe when my PSE 11 stoped working properly. I had it for only about 6-7months before I updated my software on my imac and it all went downhill.... Then to add to that my Adobe account was hacked. Adobe never informed me of this situation. I heard through a friend that I should check to see if I was one of the very many who's online accounts were tampered with. I had to reset every single password and username for nearly 30 online accounts to avoid any further tampering with the hackers. And all Adobe suggested was for me to pay for an upgrade to PSE 12 which I did but wasnt very impressed to say the least ( i was on an online chat with them for over 2hours trying to get my PSE 11 issues solved to no avail). Then this sluggish performance starts happening again using the new version PSE 12?. I'm going to stay clear of adobe if I have the option to purchase similiar software from another supplier. I would and will encourage anyone else who has problems with there software to do the same. Older versions should work perfectly fine for ages. I wonder If Adobe is trying to get us all to pay for the monthly subscription option(s) to avoid having issues with older versions of their software. As the subscription option keeps you ontop of all the latest versions... I wouldn't put it past them.
    All the best returned,
    Ray

  • Spotlight has stopped working properly. Even when a known file is entered (with full file name) in search, it fails to find it. Any ideas?

    Spotlight has stopped working properly. Even when a known file is entered (with full file name) in search, it fails to find it. It finds some things, but is not to be depended upon. Any ideas?

    Try reindexing spotlight: Spotlight: How to re-index folders or volumes - Apple Support
    If you still have problems, open Console app, select All Messages, then search for mds in the search field. Then search for mdworker. See if there are any messages indicating it is having problems with certain files.
    You can also delete the index altogether and cause it to reindex with a command in Terminal. I have always assumed the method above will do the same, but I'm not certain. You must run this command while  logged into an admin account. Copy the whole line and paste it into Terminal.
    sudo mdutil -E /
    sudo temporarily elevates your privileges and will ask for your password. When you type it in, there won't be any response in the Terminal. Just type it and hit return.

  • My IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

    my IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

    Hi I have an HP printer. I use an APP called print central from APP Store. Used this for the last 2 years on 2 IPhones & 3 iPads with no problems. Cheers Brian

Maybe you are looking for

  • Purchase orders item texts incorrect display

    Hi everyone, i am having a bit of a hard time solving an incorrect display of purchase orders item texts. For an unknown reason, i can't manage to modify the item's text of a purchase order, it's as it has been set on "display". I checked AKTH, ME21,

  • CO Assessment Cycles

    Hi I have an assessment cycle created which got 1 sender cost center and 4 receiver cost centers. The  receiver cost centers belong to 2 different profit centers. Apart from that we have New GL activated as well When I execute the actual run for this

  • IMac crashed, how to save previous version iPhoto files?

    hi, my late 2012 iMac crashed last week & I just got it back from the repair shop yesterday. The technician wiped everything & reinstalled all except iPhoto (I believe my original version was 9.4.2). My OS is now upgraded to 10.9.4 I'm very concerned

  • I can't open multiple files on preview, help?

    Every time I open a folder of new files (all .jpg but downloaded with Chrome) it keeps asking me if I'm sure I want to open the file, and it only opens one of the selected files, I can't find anything on how to fix this with the preferences (neither

  • Is it a must to unlock the iphone 3gs?

    i just bought an iphone 3Gs. it seems that some applications are not functioning. do i need to buy the unlock sofware and unlock the iphone?. what are the functions of unlucking the iphone.