IPad hdmi connector

When watching a movie on netflix or any movie, or show. Is there any way to turn off the screen on the iPad?

I don't want to spend the money on the HDMI connector and HDMI splitter if it won't work.

Similar Messages

  • I would like to have my iPad2 mirror onto 2 TVs at the same time. Can I use the iPad HDMI connector with a HDMI splitter to accomplish this?

    I would like to have my iPad2 mirror onto 2 TVs at the same time. Can I use the iPad HDMI connector with a HDMI splitter to accomplish this?

    I don't want to spend the money on the HDMI connector and HDMI splitter if it won't work.

  • IPad 2 hdmi connector no longer works with iOS 7.3

    Hi any one else had this issue? I have always connected my iPad 2 to my tv via a apple made hdmi connector, used mainly for fils on netflix eat. Since firmware updated to 7.3 this no longer works. Is this anther apple issue? My wife has an iPad 3, pre lightening and the "official" adapter has never works just get a message that states the attached accessory is not supported.... Any ideas anyone???

    I have an ipad 2 running ios 6.0.1 and an older Dell TV (1080i) and have always been able to mirror.  Running ios 5 the mirroring worked perfectly for sound and video.  Don't remember if I tried while running 5.1.  Now that I have 6.0.1, I can still mirror, but the whole screen is pink on this Dell TV.  When I make the connection from ipad to the tv, mirroring starts immediately and the notification bar on the ipad home screen pulsates from blue to black and the cable is detected.  I have sound and video working fine except for the colors.  The ipad detects the AV Composite cable under settings>about but there is no TV out setting under General Settings where I'm supposed to see TV OUT listed under iTunes Wi-Fi sync.  I have changed the hdmi to a new one, but it didn't help.  I also have a new Panasonic Viera tv and everything (with the same cables) works perfectly on that TV.  Leads me to believe it's an issue with the TV OUT function of the ipad.  I don't know if any of this is helfpul information, but I thought it might help you narrow down what is going on with your setup.

  • Will sky go work with iPad 3 hdmi connector

    I have no probs with utube using air share, and there probably is some protection with sky that stops
    me doing this but I was to buy a hdmi connector would this allow me to show sky go on mt tv.

    In the photo the connector looks the same, BUT in the "Compatibility" section it only lists iPad 1 & 2.
    Other accessories have listing in "compatibility" section for iPad 1, 2,& 3, I thought this might be incompatible as iPad 3 isn't listed.
    I don't have a problem with the cable I have { I don't think I do, anyhow }  I am wanting to have the extra cable in my Lounge room and one in Bedroom.
    Will these allow me to connect to the Apple iPad Dock located on : http://store.apple.com/au/product/MC940ZM/A?fnode=MTc0MjU4NjE ?
    Message was edited by: b j t

  • IPad 2 hdmi connector problem

    Just bought a hdmi connector tonight with the intention of watching Netflix.  Video works great.  However,  the audio is not working.  Static is so bad I can't hear anything.  Is there a problem with my setting or is my iPad defective???

    Thanks for the reply. I keep looking for the "Preference Tab" but there is none.
    Just ion case
    I am building the slide show on the Ipad 2
    I am running the latest updates in Keynote and my IPad 2
    I do see the "setting" with in the keynote app but nothing in there.
    Thanks

  • Hdmi connector differences between iPhone and iPad?

    I am using an apple to hdmi connector.  On my iPad all apps display.  On my iPhone only Netflix displays.  Eg photos do not display.  Any idea why?

    When you do a photo slideshow on the iPhone do they display?
    I imagine that you have an iPad that has display mirroring capabilities and an iPhone that does not.
    In which case you need to upgrade your iPhone for display mirroring capabilities.
    More info:  http://support.apple.com/kb/ht5209  This works with AirPlay and HDMI cable.

  • Accessory not supported by ipad - ipad2 HDMI connector will not work with ipad (4th gen)

    I am a bit frustrated with the fact that I purchased all of the adapters/connectors for my iPad 2 back in the day -  and now all are pretty much worthless with the iPad (4th gen.)
    The iPad g4 uses the new lightning connector. OK. So, I bought the updated adapter (lightning to 30 pin). HOWEVER, it does not allow the Apple HDMI connector to work... "This accessory is not supported by iPad"
    I have to buy yet ANOTHER adapter: the Lightning Digital AV Adapter, and drop $49.00???
    RIDICULOUS!

    There are only other users here.
    Let Apple know by posting at http://www.apple.com/feedback/ipad.html

  • My iphone no longer displays anything through the HDMI connector

    I purchased a cheap 30-pin to HDMI connector (big mistake) but was able to see my iPhone screen on my TV.  I then added a Lightening to 30-pin connector so I could display my girlfriend's iPhone 5C screen on the TV.  But I had problem taking these two connectors apart and the end of one of them started to come apart.  Pushed it back in.  When I then tried to display her 5C screen, nothing worked.  Then I went back to my iPhone 4 and it also no longer worked.  I thought the cable was bad so I then purchased a genuine Apple 30-pin to HDMI connector and Apple Lightening to 30-pin connector.  But I still don't see anything on the TV for either of the iPhones BUT my iPad 2 does display data on the TV.  Conclusion:  Did I short out something in both iPhone internal connectors?  Has anyone ever see this kind of problem?  BTW, both phones can still be charged without any problem.
    Thanks for the help.

    I'd start by calling VZW support.  They are really good in a situations like this.  I work with them a lot in the Enterprise space.  Sounds like your network/roaming settings are messed up.

  • No signal in my Samsung tv when I use HDMI connector?

    Hi. I have a problem with the Hdmi connection to my iPad 3. It doesn't work in my Samsung tv, it says " there is not signal". I have tried it  in another one, same brand and it works. Does anyone know what the problem could be?
    Thanks
    Ladysnow

    Thank you for your answer. I have checked the Hdmi connector, in this case is Hdmi2 and still the same problem :(

  • Is there a 30 Pin to HDMI connector?

    I would love to be able to connect my Verizon iPhone 4 to my new HDTV. Is there any way to connect it to an HDMI connector? I saw component and RCA adapters, but no HDMI (which would include sound). Does such a connector exist?

    You mean this:
    http://store.apple.com/us/product/MC953ZM/A?fnode=MTc0MjU4NjE&mco=MTcyMTgxNTk
    It may work but the mirroring only works with the ipad 2.

  • HDMI connector?

    Has anyone found a mobile Dock to HDMI cable available? The Apple Store has iPad dock connectors to VGA and to Component...but no HDMI.

    Maybe here:
    http://www.alibaba.com/product-gs/343508669/forApple_iPad_30pin_DockConnector.html
    http://honwally.en.made-in-china.com/product/molQCrDVbvkW/China-Accessories-for- iPad-Apple-iPad-Dock-Connector-to-HDMI-Adapter.html
    http://zlstudios.net/2010/10/an-ipad-hdmi-output-uses-30-pin-dock-connector/
    Google is your friend. There are others too. Note the first two are for wholesalers but there must be a retailer somewhere.

  • How can I connect my Early 2011" Macbook Pro 13" inch, with a generic Mini Display Port to HDMI connector, to a LG 32LD340 LCD TV, using Mountain Lion 10.8.2?

    I have an Early 2011" macbook pro 13 inch (core i5 2.3ghz 4gb ram 320hdd) with Mountain Lion 10.8.2, and I want to connect it via Mini DP to HDMI connector, and a HDMI cable to a LCD TV LG 32LD340. When I had Lion OS, I had no problems at all.

    If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

  • Since I upgraded my iPod Touch 4G, the HDMI connector to my TV (that I bought from Apple) is no longer supported. Can this be corrected in a short period? Thanks

    As stated in the title, since I installed iOS6 on my iPod Touch 4G, the HDMI connector that I bought from Apple is no longer supported/recognized...
    A bit of a problem, when you buy an accessory to be able to watch videos on any HDMI enabled TV....
    Too bad that nobody checked on it before releasing the OS...
    Is there a solution to be released soon (like very soon)????

    Sometime the following works.
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.

  • I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?

    I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    If you have two displays attached, then the function to change from mirrored to extended Desktop will appear in System Prefs/Displays.

  • No sound via mini display to HDMI connector

    Hi all,
    I have the i7 8G ram version of the X1 Carbon (UK version) and love it.  The only issue I have with it is in relation to the mini display port.  I use a lot of HDMI equipment so immediately bought the mini display to HDMI connector from Grifin, see http://store.griffintechnology.com/video-display-converter but whilst video exports fine no sound is being output via the HDMI cable and end up sound via the X1 speakers which are great for personal use but useless in a large room full of people.
    I already contacted Griffin support and they quickly referred me to Lenovo.
    All help much appreciated.
    Ben
    Solved!
    Go to Solution.

    BenEadir,
    When you have a video or sound file playing, go to Control Panel, Sounds, Manage Audio Devices.
    Then when you are in Manage Audio Devices, you will se a list of devices and the external device/TV your mini display port is connected to as one of the options. Just choose the one you want and set it as your default audio device and the sound should automatically go to the selected device.
    Let me know if this works for you.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

Maybe you are looking for

  • SSo between Portal 6.0 and  Portal 7.0

    Hi, We want to enable single sign on between Portal 6.0 and  Portal 7.0. Our scenario is, In Portal 7.0 on click of  role or workset, Portal 6.0 have to be opened in a new window without asking user ID and Password. What are the steps, I need to foll

  • A simple question on random number generation?

    Hi, This is a rather simple question and shows my newbieness quite blatantly! I'm trying to generate a random number in a part of a test I have. So, I have a little method which looks like this: public int getRandomNumber(int number){         Random

  • Need help in doing exercise with classes

    Here is my exercise: 1.     An object Student has: id, last name, first name, number of AAS courses and number of ESL courses in current semester and whether student uses laptop or not. The formular to calculate tuition fee: Tuition fee = AAS courses

  • SQL Query using bind variables

    Hi All, Can any one please explain me how oracle will parse the below substr query using the bind varaibles, just want to know what oracle does in the backend when processing the below substr query. SUBSTR(:CDR_RT,3,7) Regards, Deepti

  • Telephone number format in Contacts

    Telephone #s in my address book are formatted (123) 456-7890.  Since almost all calls now require all 10 digits, I prefer 123-456-7890.  I don't know why it always converts to this setting -- and I don't see any place in Preferences to change it.