IPad iBooks is installed, but says I need to install iBooks to download a sample or purchase book
I have been using iBooks on my original ipad since it came out. Now, when I go to the store in iBooks and try to download a sample in iBooks or purchase a book, it tells me I need to install iBooks! This just happened in the last few weeks (since about early to mid-June 2011). I have tried deleting iBooks and reinstalling, and still get the same error. iBooks still seems to work normally on my iphone4. What else can I try, short of resetting the iPad to factory settings?
Scanning this forum, it seems that at least a dozen people have experience this problem. I am one of them.
I tried all the usual approaches to fix this: re-installing iBooks, cold reset of the iPad, resetting and restoring the iPad (very time-consuming) and none of this works.
Here is what you need to try: figure out when the problem first starting happening to you, and then delete any App you have installed since before the problem first appeared. I had the problem start about 4 days ago, so I deleted all the apps I had installed in the past week. THAT FIXED THE PROBLEM!
Then I started re-installing the Apps, one by one, until the problem came back. In my case, it was just one App, the mere installation of which causes the problem with iBooks on my iPad. The App in this instance is called OnSong, and I downloaded it on May 15 when it was temporarily free at the App store and had just been released with bug fixes.
My opinion is that the problem is not unique to OnSong. There are probably other Apps that can trigger this bug in the iOS. But I think the strategy of removing Apps that were installed at about the time the problem with iBooks sample downloads occurred, is a good approach for anyone with this issue to pursue.
Similar Messages
-
When I click on "view in itunes" in IE 10, Win 8 Pro, for an advertised app, it takes me to Apple Store but says I need to install itunes first even though it is already installed.
Please post the solution so it will help others, and mark this topic as "solved" so it is easier to track the status when browsing the forum.
-
i need 1.1 gb to download fifa 12 and says i have 2.2 gb availanle in usage but says i dont have enough room to download it
The iPod requires more than twice the file downlooad size in order to downoad and install an app. You need to free up storage space as the mesage says.
-
I have an ipad 2, yesterday I updated my ipad going in to settings software update, then the ipad went into resore mode saying it needs to connect to itunes. I did that and itunes said it was goingo to do a resotre and I lost all my info, pictures, contacts. Is there a way to recover all my info?
You should be able to reconnect to iTunes and then you should see an option to restore to your ipad from your last back up in iTunes.
-
ipod touch disabled after too many tries with password. tried to restore through itunes but says we need latest version of software. now what?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Hi,
A few songs from my old purchase is not available for download. It shows as purchased but I can't download it. Please help me resolve this problem, what do I need to do to enable download for all my purchased songs/movies etc.
- AvinashThe purchases are probably hidden:
http://support.apple.com/kb/ht4919 -
IPad is full but says it needs charging and won't start
After charging my iPad all night long from a wall plug in sleep mode, it says it needs charging when I unplug it and won't start. Even holding the two buttons doesn't do anything. I know it's charged because after leaving it unplugged for some time (can take from a quarter of an hour to a whole day) if i reset it, it miraculously decides to work, and when it does, the battery level is at 100%. This is a real pain.
Anyone else has had the same issue? Any idea how to fix it?Work through the tips in http://support.apple.com/kb/YS3281 and see if that helps. If not, a visit to an Apple store genius bar for testing by the techs would be in order.
-
I need to upgrade from Snow Leopard. I want Mountain Lion, but apparently I need 10.7 Lion first. How do I buy this? It is not available in the App Store.
Update Snow Leopard to 10.6 Snow Leopard to 10.6.8.
Download OS X 10.8 Mountain Lion and install it.
Mountain Lion system requirements.
http://www.apple.com/osx/specs/
Fore more info:
http://www.macworld.com/article/1167855/installing_mountain_lion_what_you_need_t o_know.html -
so i was downloading ios 7 and it turned my iphone off and now it say i need to plug into itunes help please
you'll need to use itunes to get your phone out of recovery mode, restore with itunes
http://support.apple.com/kb/ht1808 -
My iPad is not letting me download this because I do not have flash player? I have already installed an app but unsure about how this helped. I would be eternally grateful if you could help me
There is no Flash Player for iPad. Apple doesn't allow it.
Mylenium -
I am trying to sync my iPad to PC but says i need iTunes 10.5 pr later.
I am trying to sync my iPad 1 with my pc so I can download pictures. The pc has iTunes and I have also downloaded iOS 5 on the iPad. The pc says it won't link with the iPad as it needs to have iTunes 10.5 or later. I have gone on the apple website on the iPad but when I try to down load latest version of iTunes it takes me to the iPad page and nothing happens. Does anyone know how to solve?
You need to install the latest version of iTunes on your PC - not the iPad. Go here to download an install.
http://www.apple.com/itunes/ -
Trie to install new garpahic FW update on my HD2400XT but says dont need it
Hi
I read there was an firmware update for the HD 2400 XT graphic card, from Apple see below
About iMac Graphics FW Update 1.0.2
This update is for iMac computers with an ATI Radeon HD 2600 Pro or ATI Radeon HD 2400 XT graphics card installed, running Mac OS X 10.5.2 or later.
"It updates the graphics card firmware on the ATI Radeon HD 2600 Pro or ATI Radeon HD 2400 XT graphics card in the iMac to improve system stability"
Here is the snapshot from my system profiler
"ATI Radeon HD 2400 XT:
Chipset Model: ATI,RadeonHD2400
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x94c8
Revision ID: 0x0000
ROM Revision: 113-B2250A-207
EFI Driver Version: 01.00.207"
I tried to run it, but then says, your computer does not require this update?
why is this? why wont it install?
cheersUnderstand what your saying but in this case I don't think you're right. The installer log gives the following message:
Installer[1299]: Package Authoring Warning: Package reference does not include required hash for package id auto.
Also I have yet to hear of anyone being able to install this update. Seems to me that if they are going to post it there probably ought to be some computers out there that actually need it. -
New pages installed but says I need to update Pages to open any of my previous pages documents
I recently upgraded OSX and upgraded Pages, now I can't open any of the documents previously written with pages. It
comes up that I need to upgrade and it is already installed.
I need to be able to open my documents!Then you have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.1 files can not be opened in Pages 5.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter -
Need software download of Quicktime 7.5.5 for itunes for Mac OSv. 10.5.8 so I can use new ipad. Can't find download for it. Any help is gratefully accepted
OS X 10.5.x is Leopard and not Panther - wrong cat I am afraid!
-
I have tried turning my iPad off and on several times over the past two days since it stopped working. Also, I have now connected it to my main apple computer, thinking the two would perhaps 'sync', to no avail. My computer seems to be working fine. How do I get my iPad to function again?
If you open it to take out the battery from the iPhone then you forfeit all service for whatever reason from Apple in the future.
Have you attempt to connect it to your computer and then restore it from iTunes on your computer?
Maybe you are looking for
-
Explode LUMF material in scheduling agreement
Hi SAP experts, In short: Is it possible to have LUMF materials explode in a scheduling agreement? At our company we have a lot of projects. We are in the process of selecting an appropriate way to handle these in SAP. We came to the conclusion that
-
No "All Features" tab in "New Gallery"?
Following the instructions in the Setting up the ADF Mobile Environment chapter 3, section 3.3 ("Setting Up JDeveloper"), step 8 references an All Features tab. There is no such tab. It appears I may need this tab to see the Client Tier. All I see is
-
I recently accidently told my iphone to disconnect while in the hearing aid mode. How do I get it to reconnect?
-
Software monitoring gives some sort of electrical disturbance sound
Hi. Im using a dual G5 with 2.5 Gb ram and a Mackie 400F. When activating software monitoring from within Logic I sometimes get some sort of sparkling sound. Its there all the time, even when not recording or playing back. Sounds like some sort of sp
-
After Lion install Macbook shuts down by itself
At random times My Macbook just shuts down for no rhyme or reason. Then I have to wait for a few minutes before it will turn back on.