IPad icons not working

Home page icons OK. Page 2 app icons have stopped working. Pressing one causes the screen to momentarily 'twitch'. Have tried a reset.

It should be. This is copied from the iOS: troubleshooting applications purchased from the App Store support article.
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
You should not have the pronblem again - hopefully!

Similar Messages

  • IPad sound not working

    iPad sound not working. Need help

    Is it working on any apps e.g. Music and Videos apps but not third-party apps or notification sounds ? If you do get sound in Music and Videos then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Sound on iPad is not working and I've tried all

    sound on iPad is not working and I've tried all.. Someone HELP me

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • The device mini iPad is not working  after the update of the system

    Hello,
    I need help that my mini iPad is not working at all. I started an updating process from the system but then it shuts down and it never opens again! even though the charge is full.
    please replay me .
    Best,
    Mawaddah

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • IPad activation not working please help Urgent

    iPad activation not working, I got this message "this ipad is currently linked to an Apple ID, sign in with the Apple ID that was used to set up this iPad. I enter my icloud account and user name to the computer and its ok, but not working for ipad

    See if these Apple Support documents help you ...
    https://www.apple.com/support/appleid/
    Find My iPhone Activation Lock: Removing a Device from a Previous Owner's Account
    http://support.apple.com/kb/ts4515
    If not those, then go to Apple Support for some official Apple Support help ...
    Apple Support
    http://www.apple.com/support/
    Apple Retail Store - Genius Bar
    http://www.apple.com/retail/geniusbar/

  • I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawa

    I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol

    Hi there,
    Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
    If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
    Recovery Mode and Restore - Apple
    Let me know if this helps,
    Nathan

  • I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?

    I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?
    Some please show me how to reset it.

    Here is some information from Apple:
    http://support.apple.com/kb/TS3274
    http://support.apple.com/kb/HT4057

  • I was doing an update on my ipad2 and I received an error and now my ipad is not working at all.  On the screen it just has the apple logo and a loading bar, but nothing is happening.  What can I do?

    I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message.  Now my ipad is not working at all.  The only thing that appears on the screen is the apple logo and a loading bar.  I tried to turn it off, but it just wont do anything. Help!

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?

    The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?

    I"m going to make the presumption that you've checked the volume and that you don't have it muted. One thing some have suggested is to go into the settings and reset all settings.
    It is kind of a drag because you wil have to retweak everything but it's helped for some.

  • HT4623 I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

  • Ipad photobooth not working, shows curtain closing but camera seems to be off

    ipad photobooth not working, shows curtain closing but camera seems to be off

    Have you tried closing the Camera app completely ? From the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • I have a Ipad safari not working.

    I have a Ipad safari not working, was workingthis am.  It goes to web sites but partial greyed out and can not navigate.  Other internet connections appear to be working correctly.

    Try clearing Safari's cache : Settings > Safari > Clear Cache and also Clear History
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My iPad is not working with the Jensen

    My iPad is not working with the Jensen dock

    That would be an issue for support from the Jensen dock people.

Maybe you are looking for

  • 3 displays from a G5 (is installing 2 graphics cards an option?)

    Hi there, I'm trying to set up 3 displays from my G5 with an ATI Radeon 9600 XT. Ideally two are to be mirrored and one independant. I have two 23" Cinema Displays and a cheap Philips 190CW on which I'm trying to mirror one of the Apples. I bought a

  • Not Working exportData("filename.xdp")

    Why not working xfa.host.exportData("filename.xdp"); with acrobat Professional Thanks

  • Printing results in fully/partially blank pages

    I'm developing a Java application that generates printed output, and am having trouble with pages intermittently being printed partially or completely blank. The pages contain mostly a mixture of text and line graphics, and sometimes bitmap images su

  • DVI cable with windows

    I have a 50" TV I connect to often with my MacBook Pro using a DVI cable. My son wants to connect his MacBook to the TV using the DVI adapter to fit his computer(we purchased it) and play his PC games using the windows side of his Mac. I can't get it

  • Web dynpro preview: NoSuchMethodError

    Hello, I am trying to deploy certain Web Dynpros contained in a portal business package for ESS (ess, pcui_gp). The System I am using is a Sneak Preview Java WAS 6.40, EP6.0, SP16. The deployment process as such seems to have worked correctly as the