IPad II stuck in recovery mode after an update...help, spent hours on this, none of the online forum has helped so far, t
Please help, wasted so many hours trying to fix the IPad after an update, none of the online forums have helped so far with errpr 4005
iOS: Restore errors 4005, 4013, and 4014
http://support.apple.com/kb/TS5314
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom
Similar Messages
-
Ipad 2 stuck in recovery mode after io6 update
I have waited for months to update to io6 because I have been busy, and now that I have, I'm stuck in recovery mode giving me a (-1) error. Some say that's a hardware error, but it can't be because it coincided with the update to ios6. Here's what I've tried:
Rebooting everything
Tried to recover from mac.
Tried to recover from windows.
Tried to recover using different router without wifi.
Placed in DFU mode.
Did hard reset.
Tried to hard reset with uplugging cord during download then reattaching.
Tried tiny umbrella.
Tried using different cord.
Have the latest version of Itunes.
Went into terminal and deleted file after # that some kid on you tube said to do.
I'm at my end of searching. Any suggestions???? I know it can't be hardware because it did this immediatly following the ios 6 update. Thanks,When you do an iOS update certain parts of the hardware are used that aren't normally used. If these fail then you can get an error (-1). The error occurs not because of the content of iOS 6 but the update process itself.
If you can't get out of recovery mode with all that you have tried then your iPad likely has a hardware problem and needs replacement. Hopefully you are still under warranty. -
Our iPad is stuck in recovery mode after attempting to update.
Our iPad is stuck in recovery mode after attempting to update to latest iOS..Help.
It IS plugged into the pc. iTunes doesn't even recognize hat any device is connected.
Reiboot isn't even working. considering trying DFU mode. no idea if that will even help. -
Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6
Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!
Restore ur iPad to iOS 5 or 6( if u have downloaded)
<edited by host>
Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
Then set up your iPad as a new iPad .
Here you go, Now your iPad will be perfectly fine.. -
I did an IOS update and now my iPad is stuck in recovery mode and I can't get it out. I have tried to restore through iTunes, but after restore it says it is still in recovery mode. Please help!
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
-
Ipad 2 stuck in recovery mode after updating to IOS 5, Unknow error -1
Hi Everyone,
my Ipad 2 is stuck in recovery mode after updating to the latest IOS 5. Tried to restore, it comes up with unknown error -1.
Ive tried all that I can including the tips given in the apple forums and internet. Please help.Hello soccerlime,
Thanks for using Apple Support Communities.
The error code "9006" in iTunes when updating or restoring your device indicates that access to the iTunes update servers is being blocked. Please take a look at the information below to help resolve this error.
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Resolve iOS update and restore errors
Take care,
Alex H. -
IPhone stuck in recovery mode after failed update.
Hi, I have a bad situation here... My iPhone 5 got stuck in recovery mode after I tried to update to iOS 7.1.1 from 7.0.4 and it failed (error code 6). If this was my iPod touch I would just restore it because all I have is music, but this iPhone has all my sisters graduation photos, important photos, important school documents, contacts, app data, videos from concerts. Etc. I was wondering if I could get the photos off the phone before restoring it, because they are important. I know I should've backed up my photos and made a backup of the phone, but I've been really busy with a lot of stuff. So I was just wondering if there is any way to get the photos and app data back. The app data doesn't really matter but the photos do. The device was not jailbroken or hacked in any way.
If you could help, tell me ASAP.
-JPWhen your phone is in recovery mode, it's like it crashed. The only way that you can get it out of recovery mode is by restoring, and this erases all your data as well.
You can believe what you wish by "reading all over the internet". This is Apple's technical support forum. We do know what we're talking about.
since you have very important photos on your phone, why haven't you been importing them to your computer as soon as possible after taking them? This is how the phone is meant to be used. Keeping critical data on only a device which can be easily stolen, dropped and broken is just plain foolish. Also, did you not back up your phone (as you should be doing with any computer) before attempting any operating system update? As you've now just painfully learned, updates do not always go as planned.
I'm sorry for your data loss, but let this be a very important lesson. BTW, when was the last time you backed up your computer? I'm sure you have important data on your computer. Hard drives WILL fail. -
Ipad mini stuck in recovery mode after ios 8.1 update
i have a first generation ipad mini which usually works fine. last night the ios update appeared in my settings and i tried to install it.
i didnt have enough space so deleted some apps and then installed.
the ipad switched on at the end but said the update failed as i didnt have enough space i needed a little more. i deleted more apps and attempted to install again
this failed my ipad is now stuck in recovery mode, it hasn't taken itself out as apples help pages suggest after 15 minutes its been in recovery now for 15 hours
i have tried to connect to itunes as the screen is telling me to but it will not recover from there either as apparently i can't connect to apple servers my connection isnt working - i assume because others are having this problem as i a using the same pc to post this message so know my network is fine.
i need help to get out of recovery mode - itunes says my software is up to date so i may have this nightmare software already.i originally tried to install the update using wifi and this did not work. i think i might just chuck the thing as looking on the boards all my stuff will be lost anyway - i backed up 2 days ago but that is nowhere to be found now in itunes or the cloud kmt
-
Ipone 5 stuck in recovery mode after failed update
Hi
I am stuck can anyone help?
My Iphone 5s tried to do a o/s upgrade while on holiday and got stuck in recovery mode saying it needed to connect to the pc. I connected waiting 1hr for the o/s software to download and extract only to see an error "The iphone "IPhone" could not be restored. An unknown error occurred (2005)." , I put the phone in
DFU mode and waited only to see the same error.
Help
I have followed a number of YouTube articles none fix the issue.
AliceWhen your phone is in recovery mode, it's like it crashed. The only way that you can get it out of recovery mode is by restoring, and this erases all your data as well.
You can believe what you wish by "reading all over the internet". This is Apple's technical support forum. We do know what we're talking about.
since you have very important photos on your phone, why haven't you been importing them to your computer as soon as possible after taking them? This is how the phone is meant to be used. Keeping critical data on only a device which can be easily stolen, dropped and broken is just plain foolish. Also, did you not back up your phone (as you should be doing with any computer) before attempting any operating system update? As you've now just painfully learned, updates do not always go as planned.
I'm sorry for your data loss, but let this be a very important lesson. BTW, when was the last time you backed up your computer? I'm sure you have important data on your computer. Hard drives WILL fail. -
Ipod stuck in recovery mode after software update
My ipod is suck in recovery mode after software upgrade ios 6. No matter what I did it's still stuck and itunes doesn't recognized it.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPhone4 stuck in recovery mode after iOS5 update
Hi guys,
hope someone will be able to help.
I bought a second hand iPhone 4 from ebay and all was well when recieved.
However I then tried to update to iOS 5 a few days ago and iTunes said "an unkown error occured (-1)" during the restore and now my phone is stuck in recovery mode.
I took the phone to a local apple store where a genius told me that the phone had had a "dodgy" repair in the past and so they were unwilling to work on it.
I have tried many methods to exit recovery mode but none have worked.
I will be happy to even stay on iOS4 forever as long as I get my phone back and workable.
FYI, before the update to iOS 5 all updates were succesful and never encountered a problem, the phone has never been jailbroke or hacked in any manor.
PLEASE HELP!Look what google found! Amazing how that works eh?
http://iphone-downloads.hubpages.com/hub/Fixing-1604-iPhone-Restore-Error--How-T o-Go-About-Fixing-1604-iPhone-Restore-Error
also:
*Error 1604*: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
1. Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
2. Restore and wait for error 1604.
3. When prompted, click OK.
4. Close and re-open iTunes while iPhone remains connected.
5. iPhone should now be recognized in Recovery Mode again.
6. Try to restore again. -
My ipad 2 prompted me to update, the screen went black and now it is in recovery mode with picture to connect cable.
Is there anyway to save content or will I have to restore?You will have to restore or resync your content. Did you not take a backup prior to starting the update (it's too late to do so now) - if you did then you should be able to restore to that backup.
-
Ipad 2 stuck in recovery mode after ios 6
iOS 6 dowmloaded then after the install, it says connect to iTunes. While in iTunes it says its in recovery mode and downloading iOS 6 again but it will take 4 hours what do I do??
restore in itunes
-
IPad 3 goes into recovery mode after every update
I purchased an iPad 3 in September 2012. When I installed iOS7, the iPad went into recovery mode and had to be restored to factory settings. Yesterday, I tried installing iOS 7.0.3 and it did the same thing, and I had to restore it from a backup (which I was smart enough to make before installing this update). Before installing iOS 7.0.3, I was having problems with the iPad randomly going to the black apple screen for a few seconds and then returning to normal. Any idea what is going on? Do I have a v
I had this problem with my wife's iPad when I updated to 7.0.3 via OTA. It was easily fixed for me, and I assume it should work for everyone else.
It appears that sometimes during installation of the OTA update to 7.0.3, it gets stuck in recovery half way through.
You can connect it to iTunes and restore it, which will wipe it, OR you can download TinyUmbrella and kick it out of recovery. Once you do that, the installer should complete normally (it did for me).
1) Download and install TinyUmbrella for your PC/Mac.
2) Make sure iTunes isn't running and connect your device via USB.
3) Open up TinyUmbrella. Your device should show up on the left. Click on it and then choose "exit recovery".
4) Profit. -
IPod touch 4th Generation stuck in recovery mode after attempted update
I just want to save the stuff on there before I restore it. I know I'll need to restore at some point but is there any way I can back it up first?
There is no way to backup when the iPod is in recovery mode
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How to use Purch. Info Record, for different Valuation Types ?
Hi All, While doing Split Valuation, I have created three valuation types - say, M1,M2,M3. for material M. Now, I want to create Info record for material M and Vendor V1. when i go to me11, system is allowing me to create info record for M and V1 on
-
A function to announce or to do some other functions when a dataset is loaded successfully?
What is the function to listen to the data and announce or do some other functions when the data is loaded successfully and ready to use? I've tried the getDataWasLoaded() but I must do it manually, or use it with the setTimeOut() function to check,
-
earlier my itunes told me that my files were corrupted and I needed to restore, so I did. In the middle of the restore I lost internet connection. Now my computer and Itunes will not recognize my Ipod and if it is not plugged in when I turn the Ipod
-
I have a Coldfusion website that is pulling all content from a MS Access Database. I have a backend administration site to allow website admins to go in and post new/updated code and submit it back to the database. The admin puts the new code in a te
-
Hi, I m trying to use an external webservice in VC but i always get no results. I have already set up the uddi and the classification stuff and registered the service in Service Regirtry but it seems that I just cant get any access to the service fro