IPad Images Appear 90 Degree Off on Windows. Need fix.

I took about a hundred pics from my iPad and transferred them to my PC. I needed to get a single PDF file out of them so I used this site http://www.convert-jpg-to-pdf.net/ But that site, along with Windows Photo Viewer, is displaying the images 90 degrees off. I took the time to rotate each of the images manually from within the Windows Photo Viewer, but that website still renders them 90 degrees off. I can't get a print of them that way.
How do I fix this?

How about the first answer from Microsoft Support:
Hi,
By default, JPEG and TIFF picture files that include the EXIF picture orientation property are rotated during import in Windows photo viewer
in Windows 7.
In Windows Live photo gallery you can set the option by following these steps:
1. Open Windows Live photo gallery.
2. Click on file and then click on Options.
3. Click on Import.
4. Now click on “Rotate Photos during Import”.
Some photo applications will display a photo as rotated which is referred to as soft rotating by reading metadata on the photo itself. Although the
Photo Gallery rotates photos on import using this same metadata, many a times it doesn't also rotate all un-rotated photos in their collection for them automatically, or at least display the photos as rotated like some other applications do.
The reason that the Photo Gallery rotates on import, but not after that is because there are a number of applications that don't correctly update the
photo metadata after rotating. This metadata is supposed to reflect the state of the photo, but if the photo is rotated without updating this metadata,
another application using this metadata to determine whether or not to rotate it will incorrectly rotate the photo.
During import, the photos are coming directly from the camera, at which point the integrity of this metadata is not in question. So although it's safe
for the Photo Gallery to rely on this metadata to make an accurate rotate decision during import, as soon as the photo makes its way to the PC, any
other application could interact with the photo, and potentially corrupt this metadata. Therefore, the Photo Gallery doesn't soft rotate at this point.
Regards,
Afzal Taher-Microsoft Support.
Note that if the problem is being caused by some third party application this may not address your real problem. You should contact the developer of the application

Similar Messages

HT1373 why doesn't the mini ipad image appear in itunes when syncing

why doesn't the mini ipad image appear in itunes when syncing ?

It doesnt along with the Ipad 4th gen. I wouldnt worry about it, most likely it will when the new Itunes comes out.

No Video Images Appear In iMovie Import Window

My Vixia hv 30 mini DV is connected and recognized, and when I choose to import video manually, and hit the iMovie Import button, the video plays on the camera screen but not in the iMovie import window on my iMac. Nor does the counter move, although a large message in the iMovie window says "importing". The camera's counter in the upper right hand corner of the window counts off, but not the counter next to the controls at the bottom of the window. A file name is created in the Event Library, but there is nothing in the file when I click it.
I have tried importing segments of all sizes and lengths to see if there was an issue there but no video appears on the iMovie screen, and there is no message that thumbnails are being created.
I have watched tutorials online to see if I am missing something but I have found no answers. I was able to import a one-minute segment automatically a few days ago when I first got the camera, but now Automatic does not work. It begins to import, with no images appearing in the iMovie import window and no movement in the counter, then after a few seconds the "Importing" message changes to "Stopped"
In my 'Save To" window, it says I have "5.7GB free/25 min.)" on my Mac's HD.

I found that this was due to my tape having been recorded on an older DV camcorder rather than an HDV. You'd think either iMovie or the Canon Vixia would simply tell you that in plain language, rather than give you the kind of cryptic meaningless message that the camera displays.
If you have this problem, go into the camera menu and make sure the format —DV or HDV— matches the content on your tape.

I have created a journal on my iPad 2 and shared it on iCloud, it contains screenshots of webpages, but when i try to view the journal on my desktop only some of the images appear...any ideas?

I have created a journal on my iPad 2 and shared it on iCloud, it contains screenshots of webpages. But when I try to view the journal on my desktop only some of the images appear...any ideas why this is happening?

Hi there Paula120,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared. That doesn't work anymore. How do you turn off the apps wit

Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared. That doesn't work anymore. How do you turn off the apps with ios7

Now you swipe downward, the app will appear and you delete, keep scolling to the right as in the past. With the new operating system you also swipe downward to get the search bar to find an app

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Ok, look at your files in Photoshop. What is the profile assigned to them? You can find this out by going to the Status bar at the bottom, clicking on the right-pointing triangle and choosing document Profile from the list.
Then in Windows, go to your Control Panel > Color Management and add sRGB (if it isn't there) and select it as your default profile.
I hope that will work.

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

Why are some jpg images scrambled when they appear in my screen saver? The same images look fine in Preview and Finder. Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

The desktop image is fine, taken from the exact same pool of jpg photos. However, as soon as the slide show screen saver comes on, the images are scrambled. What is it about the apple screen saver algorithm that scrambles the pics?

HDR Pro on CS 5 - Merged image appears but bottom with save buttons cut off??

When I select photos to merge, either via Bridge or within CS5 (Automate/Merge to HDR Pro), the Merged image appears over the CS5 screen. However, the bottom of the HDR screen with the photos selected for the merge along with the Cancel & Save buttons are cut off. The only way for me to exit HDR is to force quit.
My monitor resolution is 1440X900 which is better than the 1024x768 required for CS5.
I noticed the same problem in Terry White's video on Youtube describing workflow between Lightroom & CS5 HDR Pro (http://www.youtube.com/watch?v=rab25UTe6HY) as well as a couple of other users mentioning the problem to Zeno Bokor of Adobe (http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-78e5a.h tml).
Does anyone have a solution???
Thanks.

I found the soluion - after spending over an hour with Adobe phone support (800-833-6687) - of which 45min was being on hold.
It turns out that for some computers, Photoshop CS5 doesn't automatically work as efficiently as it could with the monitor resolution, even if the resolution is > than the minimum 1024 X 768. This is more frequent in those that have had older versions of Photoshop in them. This causes part of the screen to be cut off when going into HDR Pro.
One has to "prime" CS5 to recognize one's computer monitor settings. How to do:
Close out of PS CS5
Go to system preferences and select hardware settings/display (For PC would have to go through Control Panel/Hardware/Display)
Change monitor setting to one recommended by Adobe: 1024 X 768 or 1280 X 800
Save changes. Monitor will look less clear if you have been using higher settings...it's ok for now.
Now open CS5 again and access HDR Pro all three ways available, i.e. via Bridge, Mini Bridge and through PS under File/Automate.
Verify that the entire screen is visible including all thumbnails and Save/Close buttons.
Close out of CS5.
Go back to System Preferences ( for PC, go through Control Panel) and change back to your preferred resolution.
Voila! When you open CS5 again you should be able to see the entire screen.
For example, I use a Macbook Pro with OS 10.6.7 and the monitor resolution was set to 1440 X 900. However, I still couldn't see the bottom of the screen with the Save/Close buttons so couldn't save any work (had to force quit or escape to exit HDR). After doing the above steps, I am now able to use HDR Pro w/o problem and access the Merge via all three modes.
Via Mini Bridge - Choose photos to merge--> Tools (above photos, last on right in Content bar) --> Photoshop --> Merge to HDR Pro
Via Bridge - Choose photos to merge--> Tools (Tool Bar beside "Adobe CS5 Bridge" at left top of screen; 3rd from end) --> Photoshop --> Merge to HDR
Via inside Photoshop - File --> Automate --> Merge to HDR
Since this seems to have affected several people and is a simple solution, I have asked the supervisor I spoke to, Laurie, to please have someone in Adobe post this solution.
Hope this helped.
MJC

Latests ongoing 'upgrades' as they refer them IOS7, without announcement removed the feature that showed an assignged contact image appearing full screen when that contact called. Why ? brilliant feature Fast losing faith, thoroughly ****** off, moving on

Latests ongoing 'upgrades' as they refer them IOS7, without announcement removed the feature that showed an assignged contact image appearing full screen when that contact called. Why ? brilliant feature Fast losing faith, thoroughly ****** off, moving on to another phone.

We are all users here. You are not talking to apple on these forums. There is no way anyone here can know the decision making process apple uses to determine what changes to make to the operating system. Also none of use care about which phone you might buy next.

Ever since I upgraded my ipad2 to iOS 6, FaceTime comes up with the pictures sideways. Even turning the iPad, the picture is 90 degrees off

Whenever I FaceTime, the pictures are displayed 90 degrees off. Sometime I can turn the iPad and set the rotation lock and the picture will then be ok.
But last night while the picture of the person I was calling was o.k. The picture of me was upside down for the call.
What am I doing wrong? This did not happen before I upgraded iOS.

I have no brilliant solution for you because I suffer the same thing - but running Lion 10.7.5 on my MacBook Pro with iTunes 11. Every time that iTunes is updated, syncing becomes more unpredictable for me and I hold my breath hoping that it will work.
I do the same thing that you do - restart everything and that will ultimately get it all to work again. I will be following this discussion to see if anyone else has any great ideas for us both.

Ipad does not start. logo appears but goes off after some time.

I have ipad 3 which is upgraded upto date. I have charged it overnight, still it is not starting. Logo appears but goes off after 2 minutes. please help.

I have ipad 3 which is upgraded upto date. I have charged it overnight, still it is not starting. Logo appears but goes off after 2 minutes. please help.

Image Colors Change in Bridge Preview Window

I edited some images first in Camera Raw and then Photoshop (CS5), all working in sRGB color space, and saved them as JPEGs. If I select one of these images in the Bridge content pane, minimize the Bridge window, then maximize the Bridge window, the image appears correctly in the Bridge content pane but the colors are incorrect in the Bridge preview pane. If I resize the view in the content pane, the image colors in the preview pane get corrected within a couple seconds. Likewise, if I click on another image and then back, the image colors are correct in the preview pane, but if I again minimize then maximize the Bridge window, the image colors in the preview pane are incorrect again.
Windows Explorer displays the image colors correctly. ZoomBrowserEX (browser software provided with Canon camera) displays the same image (same file) with incorrect colors. When I upload these JPEGs to my web photohosting site (PictureTrail), the images appear there with incorrect colors. That is where this issue becomes most problematic because with the colors being off, the images are useless for posting to online forums or classifieds.
It seems that the color in the JPEG is being read differently by different software, and is even being read differently under different circumstances within Photoshop (Bridge). Is there a setting somewhere that I need to change? Or some other issue? Thanks.....

I have a fair understanding of color profiles and color management. My monitor is a Dell UltraSharp U3011 set to the factory-calibrated sRGB display mode.
What makes me certain that this is not a simple matter of different color management in different applications is that Bridge is displaying the same JPEG file/image in two panes on the screen simultaneously and the colors do not match. Furthermore, the incorrect colors in the preview pane image change to the correct colors if I resize the thumbnails in the content pane, or click on another image and then back; and the colors in the preview pane go back to incorrect if I minimize then maximize the Bridge window. Seems to me that there must be something within that JPEG that is being interpreted differently in different circumstances that results in the "two versions" displayed within the same application (Bridge) on the same screen at the same time, and that other apps are interpreting one way or the other.
Message was edited by: BoaMorph1
Exploring a bit further, I've realized that the same color display issue exists with the original JPEGs from my camera (Canon T1i, shooting in sRGB color space). So it seems the issue did not originate with settings etc. in Photoshop.... but Photoshop (Bridge) IS displaying "two versions" on same screen at same time, and so must be doing something different with the JPEG info in one pane vs. the other.

An extra group 'on my iphone' appeared after i sync with windows contact via itunes

I am having this problem which appears to be happened after i sync with my computer. In the contact group, there is an extra group 'on my iphone' appeared after i sync with windows contact via itunes, and even though now i stop syncing already, the group is still there. Can anyone here give me some suggestion on how to remove this group permantly, i not just wanted to remove the contacts but the entire group form appearing on my iphone. Thanks.

Is the app compatible with the iPhone (e.g. it's not and iPad-only app), and do you have the relevant iOS version on the phone ? Or do you have Settings > General > Restrictions > Installing Apps set 'off' on the phone which will stop new apps being installed ?

Should application disk images appear in Disk Utility?

When I run Disk Utility on my back up external drive, the disk image for the Google Earth plugin appears in the left hand window, separated from the list of visible drives by a line. I've never seen this before. Any reason why it should be happening?

Each of the backups on the Time Capsule is a sparsebundle. You can see the sparsebundle(s) by clicking on Time Capsule under Shared in a Finder window, then after a moment or two you can double click on the Time Capsule folder. To attempt to repair a backup, do the following. Bear in mind that the Repair function could take a few hours. I prefer to run it overnight so I don't stress about it. There's nothing like reviewing Repair messages over steaming hot cup o' java.
- Turn off Time Machine on the Mac that backs up to the sparsebundle in question. (The Mac's name is in the sparsebundle's name).
- Double click on the sparsebundle.
- Once the "Opening" dialog appears, click "Skip" to skip the check.
- You have now mounted the virtual backup drive stored in the sparsebundle -- it shows up under your list of Devices in the Finder window.
- Open Disk Utility
- Select "Backup of [machine name]" in the left pane
- Select the First Aid tab if it's not already selected
- Click on Repair disk
- Give it a few hours.
Sometimes, if the sparsebundle can't be repaired, the solution is to delete the sparsebundle and start over. Perhaps Data Rescue works on a mounted sparsebundle -- I'm not sure.
It's unlikely you need to repair the Time Capsule's drive itself, as it usually has very few files on it (just the sparsebundles), and it's disk directory is rarely updated.

IPad 1st gen not syncing with pc windows desktop

IPad 1st gen not syncing with pc windows desktop

Try disabling a/v software and turn off the Firewall.
Disable antivirus software
Turn Windows Firewall on or off
iOS: Device not recognized in iTunes for Windows

IPad Images Appear 90 Degree Off on Windows. Need fix.

Similar Messages

Maybe you are looking for