IPad in maintenance mode - Error 28 - does not let me do a reset

Hello @ all...
Yesterday, I updated my iPad (Series 1) to iOS 5.1 and tried to update the installed apps in the next step. I accidently tried to installed the new iPhoto App, that I had already purchased and iTunes told me - what was completely right - that my actual hardware was not compatible. So far so good. I clicked on "OK" to close the error message and instead of doing the rest of the sync process, everything stopped and my iPad switched to maintenance mode.
Some check-my-stuff-steps later, I tried to connect my iPad to iTunes and do a full reset in order to get the tablet back to work. The process started and after some minutes I got some error marked with number 28, which seems to be some kind of "unidentified hardware error". At next, I checked the Apple support pages to find some info on this...
I checked the malware/virus scanner... It's up to date and - for some testing - even switched off.
I checked the Windows installation... It's up to date and working fine.
I restarted the whole PC - nothing changed.
I waited for about 20 hours and tried to do it again... Nothing happend...
I still have the same problem and definitely no idea, what's the reason for this and what I can do to solve this issue. So my hopes lie on you guys...
Thanx in advance...
m.t.k.

Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.

Similar Messages

TS2972 My Apple TV does not let me see vídeos from my Apple devices (iPhone And iPad), but is working Good with pictures And audio in internet radio transmited from my iPhone And my iPad

My Apple TV does not let me see vídeos when transmiting from my iPad And iPhone, however let me listen music And see the pictures when transmiting from theese devices.

Ok thank you so much, for your timely response.
RESPONSES:
1)   When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2)   I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3)   So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself.

TS1424 Error 42110 appears and cannot watch a movie I pay for rental. I can see it is downloading, but as I click on it to watch it, the error appears and does not let me watch it.

Error 42110 appears and cannot watch a movie I pay for rental. I can see it is downloading, but as I click on it to watch it, the error appears and does not let me watch it.
what can I do to resolve it?

Hello kmb_cb_lb
If you cannot get your rental to play, then report the issue to the iTunes Store to get it resolved or refunded.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G.

I have bought a new ipad mini and when i try to use app store asks me my email but it does not let me review, it get blocks and does not let me tap review

I have bought a new ipad mini and when i try to use app store asks me my email but it does not let me review, it get blocks and does not let me tap review

You have to provide email to access app store,dont expect walk in and walk out

Desktop apps: Report Builder 3.0 (x86) that does not let me allow query result which I created Customers Report. Here is the error message returns.:

Desktop apps: Report Builder 3.0 (x86) that does not let me allow query result which I created Customers Report. Here is the error message returns as following.
Database query from: AdventureWorks2014
System.Web.Services.Protocols.SoapException: The permissions granted to user 'SQLServer2014\Mubs' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to
user 'mujb-HP\mujb' are insufficient for performing this operation.
at Microsoft.ReportingServices.Library.ReportingService2010Impl.CreateReportEditSession(String Report, String Parent, Byte[] Definition, String& EditSessionID, Warning[]& Warnings)
at Microsoft.ReportingServices.WebServer.ReportingService2010.CreateReportEditSession(String Report, String Parent, Byte[] Definition, String& EditSessionID, Warning[]& Warnings)
The permissions granted to user 'mujb-HP\mujb' are insufficient for performing this operation.
Is there anybody help me out, pl
My MSSQL Server express 2014 edition x64 and My desktop "Report Builder (RB) 3.0' is 32bit (x86).
Does Report Builder x64 exist? I didn't see anywhere so I downloaded x86 RB

Hi mujb,
Per my understanding you are using the report builder 3.0 to design the report and when you click the query designer button to execute the query you got the error message above, right?
I have tested on my local envornment and your issue can be caused by the user "SQLServer2014\Mubs" and "mujb-HP\mujb" haven't grant permission to the report server or the shared dataeource/dataset if you have used this.
I would like to confirm if you have assigned both the Item-Level and System-Level role of the user above to sucessfully access the report server, If you haven't grant any access to the above user and when you connect to the report server in the report builder,
you may got the error message:
More details information below for your reference:
Please execute the query in the microsoft SQL Server Management Studio to see if you have permission to execute the query.
If the query works fine in step1, please run the report builder as Administrator and if you are using the shared datasource/dataset the issue can be cause by the you haven't grant access the share datasource, Double click to open the Datasource
and click the "Test Connection" as below to test if it can connect successfully:
If the "Test Connection" failed, please click the shared datasource/dataset on Report Server to check if you have grant correct permission.
Related information about the grant permission to report server for your reference:
https://msdn.microsoft.com/en-us/library/ms156034.aspx
http://www.allenkinsel.com/archive/2013/01/adventures-in-ssrs/
If your issue still exists, please try to provide more details information.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

TS1702 I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

If iTunes sees the iPod, try a manual install, as pointed out on link below.
Troubleshooting 101
Some topics covered
-Basic troubleshooting steps
-Hard reset instructions
-Manual restore instructions
-Hardware troubleshooting
-Preventive Maintenance
-Anti-theft & recovery tips
-Battery-saving tips
-Repair options
-Contacting Apple
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

JCOerror: This system does not let you log on using a password

Hi,
"JCOerror: This system does not let you log on using a password"
This is the error message I get from MII tries to connect to the Production ECC using my credentials to perform a BAPI call.
These credentials work fine interactively (using the SAP GUI) and for BAPI calls from MII on SAP Development instances.
I can interpret this message in two ways:
- My login can not log on using password (though I can interactively)
- The server does not allow logging on using password only. (It might require to pre-authorize the connecting server as well).
I guess my question can be if this error requires adding additional rights to my login for the production environment, or if this is a global SAP setup for this system? Or something else?
In either way, what is required to have this work?
Thanks.

Hi,
Kindly try the following options.
Try executing the BAPI seperately in se37, using your login credentials.
Check whether RFC is enabled for the BAPI.
Check whether the SAP server is details are furnished correctly in "SAP Server"(available under "Data Services") editor.
We can ensure this by checking the connection status link in xMII.(Link is available under "Data Services").
If connection status is "Running" then SAP server setting configuration is fine. Else it is not configured properly.
Try executing the BAPI in BLS(Business Logic Services) using JCO connector.
I believe if any one of these scenarios fail then "Proxy Error" might thrown.
Thanks
Rajesh Sivaprakasam

This system does not let you log on using a password

hi all, i am very new to sap basis. i have changed the below profile parameters in RZ10.
login/min_password_length=3
login/min_password_lowercase=1
login/min_password_uppercase=1
login/min_password_digits=2
login/min_password_specials=1
after changing values i restarted the Instance. But the problem is when i am trying to login to the system it is showing an error message : "This system does not let you log on using a password". I know why this error occurs...
but how to resolve this error? plz Help.
Thanks in advance

login/min_password_length=3
login/min_password_lowercase=1
login/min_password_uppercase=1
login/min_password_digits=2
login/min_password_specials=1
The correct parameter for Min password Lenght is login/min_password_lng.
You can change this at OS level restart and see how it goes...
Regards
Juan

When i try to set up facetime with my Apple ID it does not let me saying it cannot verify my account?

when i try to set up facetime with my Apple ID it does not let me saying it cannot verify my account? if i change my ID on the ipad deos it change it on my computer aswel?

Hi
I would try this since Apple TV is built to allow multiple Apple Ids
On you Apple TV
General > Settings >Itunes Store > Add New Account (put yours in here)
Then Switch account to your Apple Id
Cheers

I am restoring the data from my itunes account to a replacement ipod touch. After all is finished in my laptop through itunes the ipod stays on the same page and does not let me finish the process, wht shoul i do?

I got a replacement ipod and did the restore data through itunes with its sync in my laptop, however, after itunes process is finished the ipod does not let me choose to continue or to finish the process, what should I do?,

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Hello everyone, Very recently itunes on my windows computer does not let me access any items in my Library except for "Apps" and "Ringtones". When I click on any other items it flashes the redcircle meaning forbidden".

Hello everyone, Very recently itunes on my windows computer does not let me access any items in my Library except for "Apps" and "Ringtones". When I click on any other items it flashes the redcircle meaning forbidden".
When I connect my iPhone or iPad I can see every items on them but not on the iTunes Library.
They sync fine with iTunes.
I browse all the menus in iTunes but cannot find any clues to what I have done for it to happen. It worked fine previously.
Thanks for any suggestion.

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

I just bought a new iPad air and have not been able to download kindle app to read my books. When I type kindle on my iPad app page, kindle app does not appear. What do I do to get this app into my iPad air?

I just bought a new iPad air and have not been able to download kindle app to read my books. When I type kindle on my iPad app page, kindle app does not appear. What do I do to get this app into my iPad air?

Hi norlowski,
Do you already have the Kindle app downloaded to an iPhone or another iPad? Do you have "Automatic Downloads" turned on under Settings>iTunes & App Store for Apps on your iPad?
You might want to try touching and holding the Kindle App option in your Purchased list, and when it highlights, let go, and it will go to a a detail page for the app with another "Open" option on it. See if it will open from there.
If you do have Automatic Downloads turned on on the iPad, turn it off, and then go back to purchased to see if the Kindle is still showing as "Open".
Post back with results!
Cheers,
GB

HT1414 iOS 7 does not let me resize my wallpaper pics to normal size to make a smaller wallpaper.

iOS 7 is a good idea. But for apple consumers that are familiar with computers this is a sad upgrade. This was forcefully released with many issues. First insure is my air play. I can only airplay sounds and my IPAD 2 plays the picture. Second issue is that the iOS system lags. Third when accessing photos to make a photo a wallpaper, it does let you move but it does not let the photo be resized like the iOS 6. Another issue is that the apple store keeps showing me updates, but there are not any updates to update. The auto brightness does not respond even when placing my hand over the sensor. This is a disgrace for apple users. How are these issues going to be resolved? Do we have to go back to IOS6? I have rebooted many time is the fix for this issue? Remind me of windows vista, *****. Please fix.

Ok, I just found the solution Thank God
You see how with the new update the icons move as you tilt the phone to give you that "fancy" 3D look, well because of this the wallpaper gets distorted.
I turned this option off, and the wallpaper resizing issue went away
Here is how to turn that dumb 3D option off (which also drains your battery):
Navigate to the iOS 7 Settings -> General -> Accessibility -> Reduce Motion -> ON
Yep, that's all.
Enjoy

Windows 7 or itunes does not recognize my ipad, windows 7 or itunes does not recognize my ipad

Help! After resetting my ipad, Windows 7 or Itunes does not recognize it. I have read and followed all assistance or how to's that I came across on line but nothing works.

Check in this order-
1. Make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
2. Try all the other ports on your computer, even a number of times.
3. Make sure your lead /connections are not faulty.
4. If you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
5. Make sure you have the latest version of iTunes installed.
6. If using Widows, make sure all Windows Updates are installed.
7. Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
8. And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

TS1538 I have restored my ipad 2 but it still will not let me in. It gives the message iPad is disabled...connect to iTunes

I have restored my ipad 2 but it still will not let me in it. It gives the message iPad is disabled...connect to iTunes. I already connected to iTunes and went right back to message.

Try using recovery mode. You want to use the computer that you use for syncing your iPad so that you can restore from a backup at the end of the process.
http://support.apple.com/kb/HT4097?viewlocale=en_US&locale=en_US
If you have an iCloud backup, you can restore from that as well. If you have no backups, you will end up losing everything on the iPad and will have to start all over again.

IPad in maintenance mode - Error 28 - does not let me do a reset

Similar Messages

Maybe you are looking for