IPad in no touch guided access; home button physically broken.
Somebody got my iPad stuck in no touch guided access. The home button is physically broken, and I was using the onscreen home button. Can I wait for the iPad to die so I can use the pad again? Or will I have to do something else.
This is a long shot. Does assistive touch work in Guided access ? If it does tap the onscreen button for the menu, then triple tap the onscreen home button to turn off Guided Access.
Similar Messages
-
IPad Home Button Physically Broken
My iPad Mini with Retina Display's home button is broken. The button isn't unresponsive, like some people's, I can't press it at all. What can I do?
Make an appointment at the genius bar of your local Apple Store and get it fixed...
-
I just bought my iPod Touch (4th Generation 8GB) from my friend and the home button doesn't work. Then, my parents took it away for about 6 months and I just got it back and I forgot my password. Then, I tried to get in too many times and now it says "iPod Disabled Connect to iTunes". Then, when I connect it to iTunes, it says for my to put in my password so it can connect. I've been trying to get back in but haven't found a way to restore it. HELP!!!!!
P.S. It's jailbroken, but the damage isn't due to Cydia. Also, I can't put it into DFU mode since the home button is broken.Actually, I can give it to someone who fixes jailbroken iPod touch home buttons, but I don't want to pay anything. Also, if you just have something to say to me that will kill me, don't say it at all dude.
-
My iPod Touch 5th Generation home button is broken?
My ipod's home button just suddenly stopped working one day. I haven't dropped it or got any liquid on it, and so I HAVE NO IDEA why it just suddenly stopped working and honestly it makes me kind of mad. My one-year warranty on it was over a couple of months ago. I am wondering if there is any way to fix it for free or anything? or like how much does it cost?
Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
Im stuck on guided access but my home button is broken,what do i do? (ipod)
im stuck on instagram as the home button is broken and i cant do anything? help someone asap?
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too -
IPod touch 4th generation, home button not working at all, Help?
IPod touch 4th Generation , home button not working at all, Help?
- Try restoring your iPod to rule out a software problem.
- The try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
iPad 2 home button fail: Apple Support Communities
You can turn one Assistive Touch in Settings>General Accessibility to use the screen instead. See chapter 30 of the users guide
iPod touch User Guide (For iOS 5.0 Software)
If under warranty make an appointment at the Genius Bar of an Apple store. -
my ipod touch is stuck on the apple logo and i cant reset it as my home button is broken what else can i try?
Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Shutdown ipad mini without using touchscreen or Home button
Hi,
My touchscreen got broken and while repairing that their was some issue(touch not working), HOME button is also not working.
Now in order to fix my touchscreen I have to shutdown it.
How do I shutdown iPad mini ? [Touchscreen , Home button both not working]
Is their a way from iTunes ?
Any other way out.
Thanks,The Home button does not shut down the iPad. Use the button on the side of the iPad.
Normally I'd recommend that you have an Apple technician take a look at your device but it seems you have voided the ability to have Apple service your iPad by having someone disassemble it. -
IPad disabled and (a) forgotten passcode; and (b) home button is broken
How can I unlock my iPad if
(a) I've forgotten passcode; and
(b) home button is broken (so the normal plug into iTunes to restore doesn't work)
I don't mind if I wipe my iPad, just need to be able to get into it.
ThanksIf the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
~~~~~~~~~~~~~~'
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Ipod Touch 1st Gen - Home button not working
Ipod Touch 1st Gen - Home button not working. Warranty over. I want to replace it with a new one. Grateful if anybody helps me to locate apple's authorized service centers in New Delhi. Also please let me know how much would it cost. Thanks in advance.
See:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
You can also go to Settings>General>Accessibility and turn on Assistive Touch It adds the Home button to the iPod's screen.
Yes, if you get it fixes, the iPod will likely be erased. Apple will not repair your old iPod, they exchange it for a refurbished one and do not transfer data. -
My home button is broken ipod touch 5th generation and wont open and itunes wont recognize it
my home button is broken ipod touch 5th generation and wont open and itunes wont recognize it
Turn on without Home/Power Button
-
Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. i cant go to DFU mode cause my home button is broken PLEASE HELP ME GOD I MISS MY IPOD TOUCH PLEASE :'((
i cant do that sir ,my ipod touch 4g keeps rebooting and rebooting all over again until the battery is empty HELP GUYS PLEASE
-
I have an iPod Touch 5th Generation with iOS 8.1, my home button is broken and I've been using AssistiveTouch for months now. Today I just locked my iPod and it wouldn't unlock again, it doesn't respond at all, it won't turn on. It was almost fully charged, so it's not the battery. I followed the steps from this thread, but I'm still getting the "USBMuxListenerCreate: No Error" message in CMD Prompt. I bought my iPod abroad and even though I do have the warranty, I've been told at the iStore that it's not valid here, so going to the store isn't really an option. Any ideas how to solve this?
Sorry, but without a working home button it is not possible to reset or restore your device. You should visit an Authorized Appel Service Provider or Apple Store to get it serviced. The warranty for an iPod is not limited to the country where it has been bought, check here: one-year limited warranty
Jailbraking the device will void the warranty.
You can check the warranty status by inserting the serial number on this page: https://selfsolve.apple.com/agreementWarrantyDynamic.do
A list of Authorized Apple Service Providers can be found here: iPod touch - Contact Us - Apple Support -
my ipod touch 4th gen home button has stopped working i have taken of the screen and tried pushing the button underneath and still not working please help
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.
Maybe you are looking for
-
Using a date variable in a where clause
Hi, I need to run a select query which contains the following e.g String query = SELECT APP_DATE, APP_TIME, APP_TYPE, a.CUST_NO FROM APPOINTMENTS a, PATIENT_DETAILS p WHERE APP_DATE = " + appDate + " and p.CUST_NO = a.CUST_NO appData is a java.sql.Da
-
Hi, Am facing difficulty in implementing folowing scenario in BW.we are trying to do Freight report. In my report, i need to display for a particular customer, type of transport,delivery quanity and freight cost. In cube or ODS, if data is stored at
-
Postpone sequence of authorization
We have some services where we want to 'postpone' the authorization task until another task has been completed by a performer. For example, we want the provider/performer to enter a price for the service (via a field in the form) before we send the r
-
How do i connect my MIDI to Logic Pro?
How do i connect my MIDI to Logic Pro?
-
Hi all After the output is displayed with ALV ,I have the following requirement A status field will be found at the end of the row and will reflect the current status of the print documents. After printing occurs, the screen should refre