IPad installation?

I'm going to be getting an IPad 3 in the near future. Can I install Elements 11 onto it when I get it?

If you are using Elements Organizer on desktop then you can install Adobe Revel on your iPad. You can import/export photos from Organizer to your Revel account and images can be accessed via your Revel on iPad.
With PSE 11 we have now import/export to Revel in Organizer.
http://www.adobe.com/products/revel.html
Thanks,
Garry
This info about Revel is interesting.
If I am running PSE 11 on Windows 7, can I use this import/export with Revel ?
Would an import of a photo from Revel to the Elements Organizer cause that photo file to be written to the hard drive of my computer and cataloged in the Elements Organizer catalog as a "local" photo file ? (for example a photo originally taken with iPad)

Similar Messages

IPad installs not working

The apps on my iPad are not updating. I am receiving a message stating either "Cannot connect to App Store" or "Cannot find the host name specified." It's been about 3-4 days but the message still says "installing".

Hi there,
I would recommend taking a look at some of the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W.

IPad syncing with new installation

I've had my iPad synced with my Mac Pro running Leopard since I've had it.
For one reason or another I've never got around to updating to Snow Leopard despite having a disc partly as I had some incompatible apps, partly as the Leopard system has been pretty stable.
The other day I decided it was time to change to Snow Leopard but removed the Leopard boot drive rather than upgrading, and stuck in a new drive and did a 'fresh' install on that from the DVD.
Gradually recreating an iTunes library on the new drive by adding media files.
Clearly this iTunes instance has never seen the iPad before, but my question is will I be able to connect and backup current iPad installation to this effectively new computer or should I swap the Leopard drive back in to do this?
Also if I run into problems will I still be able to restore an older backup from the Leopard drive?
BTW I generally manually add media files to the iPad, and assume they might disappear if I sync with a new iTunes instance even if I disable automatic syncing in iTunes?
Thanks in advance?

Thanks for the suggestion.
My older itunes folder/library was in a bit of a mess so I wanted to start with a clean slate and repopulate from scratch, weeding out rubbish. I have media spread out on loads of smaller drives some of which does not have correct metadata as I haven't added it, so taking the opportunity to spring clean/tidy up.

After updating my iPad 3 from iOS 7.0.6 to 7.1 I can't do anything. It constantly reboots while trying to restore backup. Epic Fail!

My attempts to update my ipad 3 to IOS 7.1 via iTunes on my Mac Pro has essentially bricked it. I carefully made a backup before doing the update but its of little use. The iPad installs the firmware update and reboots and asks about the backup to restore and begins the sync. But, it reboots about 20 times while trying to restore the beast.
It is a 64 gb ipad and was pretty full so retrying to restore from backup is taking 6 hours each time. Maddening!
I've spent months setting it up. The thought of restoring as NEW is so depressing.
The initial attempt I did over night was just unusable this morning. I couldn't get past the Apple Logo. I finally gave up and put it into recovery mode and redid it a second time. It must have rebooted 20 times while copying all the apps and media back. It made it but was then useless again after being disconnected from the Mac.
I then tried once again and aborted it after it was rebooting again constantly during the restore from backup.
It seems to be OK thru the firmware install but it can't seem to use my backup. I'm going to try and restore as NEW just to see if it will work at all. At that point maybe I'll try and manually restore the backup so I don't lose all that organization.
Anyone got any better ideas? I'm refusing to thing about "upgrading" my iphone 5 until I see how this comes out....
goose

Slone,
I finally decided to turn this annoyance into an opportunity. After a lot of experimenting I found that my iPad was just fine under 7.1 if I simply restored it as new. I have a lot of time on my hands and I had 1424 apps on my iPad! This is why every attempt to restore took so long.
I decided to restore as new, spend a day restoring the apps I really used. Doing so gave me a quick iPad with only bout a quarter of the storage used.
Granted it was a pain in the arse, but I wrote it off as in the old days when you had to do this with windows 95 just to keep a stable system.
I DO have some data in a few files of the now unused backup but a quick google search finds a couple Mac programs out there that will allow you go extract audio recordings, app data files etc. from the backup. I'll do that someday if I even miss the files I've probably forgotten that are there.
Anyway, there was nothing wrong with my hardware. I think there were just some troublesome setup items that 7.1 didn't like. Once set up as new, the ipad was fine.
Good luck!

I can't login to Store from my ipad2 when my Wi-Fi is working

It said "i can't login to iTunes Store", but my wi-fi connection is working. I can Online and I can see apps in the app store, however I cannot download any apps, please someone can help ? Thank you

I've been trying to update and install a few apps within the last hour with limited success. I'm inclined to believe the app store may be having some issues like earlier this month (2 June) with iPad installation of apps. I get "unable to connect to iTunes store" and my apps that need updating are blank squares that all say waiting. I'm pretty sure it will be fine in a few hours. There may be maintenance of some sort. My husband is having the same problem. I'm using an iPad 2, iOS 4.3.3 and he is as well.

IPhoto '11 Crashes on Startup due to Quicktime/AviImporter-r7

Sitting on a MBP 15" from last year, snowleopard, all updated.
The other day I ran the 4.2 iPhone and iPad installs and had to upgrade my iTunes to a beta release, I assume this has caused issues with my iPhoto.
When I click on the icon it bounces a little while and then just stops, no glowing triangle under no icon in the cmd+tab-thingy, but when I right click on the icon it allows me to force quit.
The console says the following, three entries whenever iPhoto is launched
11/3/10 1:11:03 PM iPhoto[27797] Error loading /Library/QuickTime/AviImporter-r7 (ppc).component/Contents/MacOS/AviImporter: dlopen(/Library/QuickTime/AviImporter-r7 (ppc).component/Contents/MacOS/AviImporter, 262): no suitable image found. Did find:
/Library/QuickTime/AviImporter-r7 (ppc).component/Contents/MacOS/AviImporter: mach-o, but wrong architecture
11/3/10 1:11:03 PM iPhoto[27797] Error loading /Library/QuickTime/AviImporter-r7 (ppc).component/Contents/MacOS/AviImporter: dlopen(/Library/QuickTime/AviImporter-r7 (ppc).component/Contents/MacOS/AviImporter, 262): no suitable image found. Did find:
/Library/QuickTime/AviImporter-r7 (ppc).component/Contents/MacOS/AviImporter: mach-o, but wrong architecture
11/3/10 1:11:03 PM iPhoto[27797] Error loading /Library/QuickTime/AviImporter-r7 (ppc).component/Contents/MacOS/AviImporter: dlopen(/Library/QuickTime/AviImporter-r7 (ppc).component/Contents/MacOS/AviImporter, 262): no suitable image found. Did find:
/Library/QuickTime/AviImporter-r7 (ppc).component/Contents/MacOS/AviImporter: mach-o, but wrong architecture
My theory is that the quicktime that came with the itunes beta is bad, but I can't update because the original itunes(from apple.com/itunes/download) gives me the error of being older then the installed version - obviously.
I know this one will be fixed as soon as itunes + quicktime go life this month, and then everything should work fine, but I really want to get the images off of my iPhone and onto my MBP so I don't want to wait.
What do you think? Deleting the Quicktime framework? reinstalling iPhoto? or maybe i can remove all the videos from my library manually before trying iPhoto the next time...
Will check if the library is still ok on an other machine and post results..

awesome, thanks for the advice, I was afraid I would loose quicktime functionality, but after I deleted them AND RESTARTED it worked again...
you rule
apple is the best
steve jobs is the man!

HT4053 can i set up my new iphone 5s using my ipad (because my work laptop wont allow me to installl itunes).?

can i set up my new iphone 5s using my ipad (because my work laptop wont allow me to installl itunes).?

No, but you do not need iTunes to setup a new iPhone 5s. Create an iCloud backup for anything you want to transfer to the new iPhone.

Can't Sync Ipad 2 with Computer b/c Itunes 11.1 installation fails

Hello! I have a question in regards to my ipad 2 and syncing it to my computer. I recently installed IOS 7 onto my Ipad 2, but when I went to sync it with my computer, Itunes gave me an error saying that I needed to download and install itunes 11.1 for compatibility reasons with IOS 7. So, I was able to successfully download the new versions of itunes directly from the itunes website, but the issue came when the installation process began. The installation ran and had finished in a short amount of time and then I received this message:
"Errors occured during the installation before iTunes could be configured. Your system has not been modified. To complete the installation, run the installer again. Click finish to exit the installer."
So I went ahead and downloaded the software multiple times (5 times) and attempted to install it multiple times and I constantly receive the same error that is displayed above. If anyone has any clue on how to fix this I'd GREATLY appreciate anyone's suggestions. I generally can fix these problems myself but this problem seems to be persistent and many other people are having similar issues.

I have to say this would only happen on a windows PC,   Why it doesn't prompt you to close all windows baffle me still!
The install gets hung up because of an open window.   You must close all windows before installation.
Open downloads and delete the downloads you did so far.
To get the install back on track:
Scary, but it will be the cleanest install. Uninstall iTunes using the control center. Directions can be found here:
http://www.ehow.com/how_5610253_uninstall-reinstall-itunes-windows.html
Note...you must close all windows during install.   After the download, open download window, close all other windows.
Click on install.

This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes

I have seen others post this same question but the answers provided does not resolve my problem. My iPad Air is running iOS 7.1.2. I have been using this same computer for three years. It has Windows 7 home premium, service pack 1, 64-bit Operating System, Intel 3.4GHZ computer and 16.0 GB . I used this same computer with my iPad2 for several years. I purchased an iPad Air a year ago. I never had a problem with either iPad using iTunes. About a week ago, my computer would no longer recognize the iPad Air. I thought it must be a driver problem or iTunes somehow became corrupted. I uninstalled all of the Apple products except for iCloud and deleted any Apple software left in my Program Files and Program Files (x86). I then downloaded from Apple, iTunes64Setup.exe which is a 110,833 KB program. I installed the program without a problem. It installed Bonjour, Apple Software Update, Apple Application Support and iTunes. These programs I had previously uninstalled. I then brought up iTunes. I now plugged in my iPad Air and a popup message appeared "This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes". OK, I did as instructed. I used the iTunes installer to remove iTunes then ran iTunes64Setup.exe. I brought up iTunes and got the same message. "This iPad cannot be used because the required software is nt installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes" In general, I have found the Apple software to be robust and reliable. This situation however is very disappointing. I am hoping that someone has an answer that I can use to resolve my problem.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2

I have installed ios7 on my iPad 4. After installation it asked me pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6.

I have installed ios7 on my iPad 4. After installation it asked me a pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6. I asked Apple store & tech said to format it but I will lose all the data..!

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

I can't upgrade from IOS 6.0.1 to IOS 7.1.1. iPad says it has downloaded IOS 7.0.3 but cannot verify the installation. Cannot restore or update in iTunes either. Help please?

I can't upgrade from IOS 6.0.1 to IOS 7.1.1 on my iPad 2. iPad says it has downloaded IOS 7.0.3 but cannot verify the installation if I try and install it. It claims that I have lost internet connection, which I have not. I cannot restore or update the iPad in iTunes either, if I try to, I get an error message which says that I 'do not have permission to access the requested resource'. I am using the latest version of iTunes on Windows 8. I have tried putting the iPad in recovery mode and restoring it with iTunes, the result is the same.
Any help would be much appreciated.
Thanks!

@Rudegar
Thanks for the reply, but I've been having this problem for well over a week. If it is a corrupt download, is there some way of deleting it from the iPad and getting a new one?
Thanks

HT203687 Trying to install iCloud on a new Toshiba laptop so I can sync with my iPad and iPhone. I get error message HRRESULT:OX8007OBC9, says the installer encountered errors before iCloud Control Panel 2.0 could be installed. Same problem trying to inst

Trying to instll iCloud on a new Toshiba laptop so I can sync contacts, calendars, email with my iPhone and iPad. Get error message HRRESULT:OX8007OBC9, says installer encountered errors before iCloud Control Panel 2.0 could be configured. Have the same problem trying to istall iTunes.

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

IPad is connected to a stereo installation - no control of the volume by the iPad

When my iPad is connected to a stereo installation, there is no possibility anymore to control the volume by the iPad.
'the volume control' is replaced by 'dock connector' on the iPad

This issue manifests as The volume control shows sound effects on screen or phantom docking no volume slide control.
For the beginners, the issue is often the side switch is set to mute on off and not screen rotation lock. The switch is off. (see settings)
Other issues around software and airport use can be resolved by hard reset, or reset options inside the settings. I use AIRPORT all the time.
You may have even tried the re-installing the firmware/ios
So when all has failed to work, the you may have dock connector PIN 21 problem.
I had an issue that started with the ipad whe it was on USB cable to PC.
No drop, no sudden cable movements. Just gone....
No volume slider. IPAD behaves as if it was docked when not.
Slight movement when usb cable is in occasionally brings the volume control back but only for a few seconds then it disappears.
Mine is going back for repair/replacement.
cheers Phil

IOS 8 update did not installing iPad Mini, space still used by installer, not recognized by Software Update, says I need to make more space again

I Cleared room on my iPad Mini for the iOS 8 install, downloaded the installer and started he install. Device restarted rather quickly after turning off for install, did not update. When I went back to Software Update to try again, it says I need to redownload the installer and I now am using the ~1GB of space taken up by the original install file and need to clear that much space. Any way to either get my iPad to recognize the install files or delete it so I can try again?

Hooked it up to iTunes to update. The first time I tried, an error popped up that said there was an error with the firmware, so I reset my iPad Mini and tried again. This time it updated fine, no errors. Thanks for the help. Also, the original update file is now deleted. Because I have that space back.

I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything

Hi, I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything. My ipad rebooting every 2 or three minutes

See Here
iPad Unable to Update or Restore
http://support.apple.com/kb/ht4097

IPad installation?

Similar Messages

Maybe you are looking for