IPad ios8 random reboot with blue screen

Hi everyone,
I Know this question has been posted already but I'm so frustrated.
after upgrading to iOS 8 my iPad air started to reboot randomly with blue screen at least 5 to 6 times a day.
when will apple provide an update fixing this issue? Since it seems more common.
model: iPad air wifi only
ios: 8.0.2
i have tried turning off iCloud sync as many suggested but it didn't help.
reboots are frequent when I'm using safari.
most of the time the diagnostic log shows WDT timeout
{"bug_type":"110","os_version":"iOS 8.0.2 (12A405)"}
Incident Identifier: 524C9CFE-E20D-4D2F-B661-9CFD8A0CB89E
CrashReporter Key:   1db2e77104549f32cb56eb1d2daee436b4bdd220
Hardware Model:      iPad4,1
Date/Time:           2014-10-12 16:24:31.232 +0530
OS Version:          iOS 8.0.2 (12A405)
Debugger message: WDT timeout
6s ago: 0b50 0f9fd0ce63 0r1e88000 0m0/1
OS version: 12A405
Kernel version: Darwin Kernel Version 14.0.0: Thu Sep 18 21:51:01 PDT 2014; root:xnu-2783.1.72~23/RELEASE_ARM64_S5L8960X
iBoot version: iBoot-2261.1.68
secure boot?: YES
Paniclog version: 3

Try Barry's suggestion first.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

Similar Messages

  • TS3274 My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persis

    My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists

    Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple. 

  • Iphone6 ,ios 8.2,8.3 randomly reboot with blue screen

    i have an 64G iphone 6 with ios8.3 .my problem is blue screen!I had it before this update too but now is intorable! sometime my wifi drop and it randomly reboot And sometimes it shows blue screen and randomly reboot ;i think it is beacuse a software bug.
    It happen 4 or 5 times a day! I think im not alone ,also my friend have this problem on iPad Air2.

    Exactly the same issue with iphone 5s 64G. It started with iOS 8.2 and then 8.3.

  • LR Mobile sync caused iPad mini to crash continuously and reboot with blue screen?

    Hi,
    I've been using LR Mobile on my iPad Mini (Retina) for quite sometime now without any issues. It worked flawlessly, until yesterday.
    I'm not sure whether this problem was caused by the LR Mobile app or not but this was my experience.
    Begin syncing a LR Catalog file (760 photos, needed 1.6 GB of space on my iPad). Sync and download was in progress. (I enabled the offline edit option).
    After like 10 minutes, I checked my iPad to see the sync status and it crashed and restarted by itself.
    After it booted, I opened LR Mobile and bang.... it crashed again.
    This happened several times and I also begin to get the blue screen of death on the iPad.
    Finally, it booted properly and I opened LRM and begin to re-sync. Things went smoothly.
    I had to cancel the sync (around 650 photos were synced) as I had to rush to work and the sync process was taking too long (it took me like 3 hours to sync the 650 photos as the iPad would go into sleep and the sync process would stop. Plus the iPad was crashing and rebooting in between the sync process and caused a loss of time).
    Anyhow, on the way to work I opened LRM and begin working on the images. Everything seemed fine.
    Just an hour ago, when I unlocked my iPad and wanted to work on the images, it crashed again. This time it went in a reboot cycle and the screen went bonkers - got the blue screen, and weird visual distortions of the apple logo, and other unusual visual effects begin to occur. I thought the iPad was gone for, as it went off and wouldn't even restart. (I even tried doing a hard reset - Home + Sleep/Wake buttons).
    Finally when it booted and restarted on its own, I immediately deleted the LR Mobile app and restarted the iPad.
    It's been like 2 hours now and the iPad's working fine.
    Did anyone experience similar issues like this? Or is it just me
    I feel very annoyed because after waiting for hours for my catalog to sync, I had to delete the app and lost all my synced photos
    Can the Adobe LRM team please clarify if this could have been cause by the LRM app?
    I've been using LRM for a long time and never encountered such a problem. Could it be because the app required around 1.6 GB of space on the iPad and they sync/download process was taking like forever to get done. ( I had plenty of free space on my iPad. Had like 5.6 GB free on it).
    Any help and advise would be truly appreciated

    Hi,
    Lightroom mobile should not be causing any iPad crashers, the issue with the crashing LrM is a known issue.
    What would help would be if you can collect logs from your tablet and send them privately to me.
    Only then we can know for sure if it's really caused by LrMobile.
    We would need all your logs that you can find under these folders that are close to the date and time when your device restarted.
    OSX: /Library/Logs/CrashReporter/MobileDevice/DeviceName/
    Windows: C:\Users\AppData\Roaming\Apple computer\Logs\CrashReporter\MobileDevice\DeviceName\
    Btw you need to sync with iTunes to see them.
    thanks,
    Ignacio

  • IPad crashes PC laptop with blue screen of death when syncing

    I just got a brand new iPad and I cannot sync a bunch of songs or photos without it just completely shutting down my laptop (PC)and giving me the "blue screen of death". I tried reinstalling iTunes, disconnecting any USB connections I may have and completely updating my lappy...but nothing works! Why can't apple just make something as simple as "syncing" work? Do I have to buy a Mac in order for my iPad to work properly?! Please help me out with this syncing problem.

    Hello iPadgirl777,
    And welcome to Apple Discussions!
    First of all, you posted this in the *6th Generation iPod Nano* forum, when you should have posted it in the iPad forum.
    Anyways, check out this Apple support document related to your issue.
    http://support.apple.com/kb/TS1502
    Hope it helps.
    B-rock

  • IOS 8.0.2 iPad Mini Retina restarts with Blue Screen

    Hi, although some of them have been facing this 'blue screen restart issue' on iOS 8. I never really faced the issue when using iOS 8 but ever since I upgraded to 8.0.2 I have this issue now. My iPad Mini with Retina is restarting often followed after a blue screen. The iPad is also vulnerable to crashes and freeze after the iOS 8 upgrade. I am so frustrated coz I use my iPad for work and office.
    Will Apple ever take notice of these issues and try to do something about it?
    Please DO SOMETHING about it and get it fixed.

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • Can anyone help me with blue screen while updating to ios8?

    help me with blue screen while updating to io8.2

    I don't have a 4G device, but I thought you can use mobile safari, the safari on the iPad, on 4G.
    You could also try looking for a third party app. The official facebook app has been non to barely functional for years. I use mobile safari on my iPad although I do have a couple  of apps I've used upon occasion.

  • Ipad air boots with blue screen

    my ipad air boots 4 5 times with blue screen as i use my wifi.....and it happend as i updated to ios 8. And i'm noticing from few days. I need the solutions

    Hi Air.sam, 
    Welcome to the Apple Support Communities!
    I know that situations like this can be very frustrating. There are some very good troubleshooting steps that I would recommend in this situation however. Please use the attached article and troubleshooting steps to help you resolve the situation. 
    iPhone: Hardware troubleshooting
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Regards, 
    Joe

  • Radom Reboots and blue screens! Please help!

    I just bulit a new system and I am having major problems with it.
    Specs First:
    Amd Barton 2500 running at stock speeds 1.8 gigs
    512 mb of Corsir ram running a stock timmings
    200 gig maxtor hd with 8 mb of cache
    K72NG mobo using the Nvidia drivers
    480 wt Antec ture power PSU
    Win Xp Pro no SP installed.
    Ok heres the deal. As soon as I got the PC up and running and Xp installed on the HD, I went to nvidias site and downloaded the latest drivers. Installed those and thats it. Things where going ok for a while then I started having random reboots. Even when the system is 100% idle it just goes to a black screen and reboots. Same thing that hitting the reset button would do while in windows. It started happening more and more. I first thought it was my power supply. I was using a 400 wt raidmax at that time, but I checked and it had the specs of a 300 wt psu so I thought that might be the problems. After reading a review of it, they reported having some random reboots with chips that were around 1.8 gigs which is what mine is. So I ordered a 480 wt Antec ture power PSU. I installed that and I still had the same random reboots. So then I ran prime95 to test the memory and cpu. Prime would get a error after about 3 sec. So at this point in time I was thinking it was the memory. Before I tested the memory I reinstalled XP over it's self to save my programs and to see if it was just a bad install. It randomly rebooted like 40 times during the install casuing it to take about 4 hours. Once it was reinstalled the random reboots were still happening, but not as often. I am not getting fatal blue screen errors. They all appear to be memory releated. So at this point I took my pc over to a friends house and swaped out my memory with his. We noticed that XP was reading both of our memory sticks as only 480 mb and not 512. We thouhgt if it read it as anything it should be 524mb. In any case we put in his good, working memory that we knew worked fine. Same things, blue screens and programs having to be shut down due to errors. I am now at the point where I have no idea what it could be. I DO know its not the PSU and Memory sticks. I am also pretty sure the CPU is fine. And yes its cooled fine and the HSF is installed right. So I am lost and really need some help, my pc is total un useable right now. I am going to E3 this week and will have a TON of stuff to do when I get back. Any ideas would be great.I really need to get this fixed ASAP. The only thing I can think of is maybe I have a bad mobo. Or some how my XP install is screwed up. The last thing i will try is installed XP on a new 20 gig hd and seeing if that will run. Anyone here have any ideas on what the problem could be and how to fix it?

    "then look to your cooler
    the other 32 mb of ram is what bios has allocated to your vga card use by the way "
    Ahh yes forgot about the onboard gpu. But dude, it's not my cooler. My temps are fine I know how to install a HSF and I have the best one out there. My CPU is cooled damn good.
    "it could still very well be some type of memory errors....try setting fsb @133 and memory at fsb/dram 1.1 all timings manual 6/3/3/2.5.....give it ago....if it works underclocked then it is still memory related."
    Even when I swaped out with a diffrent stick of ram that we knew was working? I am not using cheap ram btw, I am using high proformance ram running at stock speeds :( FSB is set at 166 right now, the only setting I changed on the ram was running it at cas 2 instead of the bios default 2.5. I think the timings are underclocked right now, will have to check when I get home from work since I do not rember what I set them to last exactly.

  • K8N neo Platinum Win XP SP2 random system crashes/Blue screen

    I have recently built a new pc with the items as listed in my signature.  Some of the compontents were new (RAM, HDD and VIdeo) and some were second hand (CPU, M/B, Keyboard and Mouse).   I found that when I install WIN XP the system seems ok.  But after I install any SP1 or SP2  which are required to run the USB2.0 my system crashes randomly and I get a windows blue screen and an auto restart.  in the last week it sometimes lasts a day or so then it crashes.  Other times it will crash within 5 minutes of start-up.  I found a forum topic about a similar problem the other day but when I went looking for it again I couldn't find that topic.  In that topic there were comments about PSU's and their ability to run the K8N Neo Platinum.  In my specs are my PSU details.  Can anyone advise if my PSU may be the problem or if there is any other problem.
    I have made a WIN XP boot disk with SP1 and I have an SP2 disk I was given by a PC shop.  If you are able to help or need further info to be able to help please let me know.
    Regards
    Kewlcop

    Quote from: PStang on 18-March-05, 05:14:57
    i had random shutdowns and blue screens until i uninstalled core center
    LOL! 
    Yet another reason NOT to use Core Center!
    This ought to have it's own sticky - Experiencing random reboots & blue screens? Uninstall Core Center first!

  • My iPad mini randomly reboots itself.  I have already connected it to iTunes and reset/ restored the device.  Any suggestions?

    My iPad mini randomly reboots itself.  I have already reset/ recovered in iTunes, any other suggestions?

    JVance720 wrote:
    Nope, never jail broke it.  Just randomly started the other day.
    Recovery Mode is your last resort per the instructions here.  Also, read this.
    If still no joy, make an appointment with the resident "Genius" at the closest Apple Store.

  • Auto Reboot and blue screen on Lenovo vibe z2 pro (k920)

    Hi!I created a theme en Russian forum, but the problem is not solved. Repair and replacement of the motherboard authorized service center does not solve the problem.The phone automatically restarts randomly about once a day. Some people frequently. Sometimes before restarting the blue LED lights up and a blue screen. Please help us.Lenovo Vibe Z2 PROK920_ROW_S141_150109

    Hello Lenovo team, I have the same issue. Took the phone to the authorized service center in Jayanagar, Bangalore, India. They replaced the display and told me that the issues was resolved. The reason for blue screen and restart was mentioned as overheating due to excessive use of 3G connectivity. I was suggested by the authroized service staff to minimize my 3G connectivity usage. In the process of replacing the display, i am left with no company provided screen guard either. I come back home and the very next day the issue appears again. It restarts with blue screen every 2 minutes. The same way as before. Now the WiFi is permanently disabled as well. Cannot activate the soft button itself from the drop down menu.I am very disappointed. I paid a good price to buy the phone expecting good performance, durability and reliability. I had definitely not expected the phone to have such major functional issues within the first 6 months of purchase. I am only hoping that Lenovo understands the seriousness of the issue and provides me a replacement for the phone. I do have some videos of the issue, if it helps you in resolving the issue.

  • My iphnoe5S always crash with blue screen,sometimes can`t start up

    my iphnoe5S always crash with blue screen,sometimes can`t start up

    Hello liuqinqin,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    Have a nice day,
    Mario

  • My ipad is locked up with the screen showing the usb port connecting to itunes.  I had not synched by ipad to my computer in a long time so yesterday it was downloading software upgrades for 5 hours.  then the screen was locked up.

    My ipad is locked up with the screen showing  a picture of the usb port with an arrow to itunes.

    Then connect your iPad to your computer and use iTunes to restore. 

  • Ipad 2 is getting a blue screen of death

    Just a couple of days ago, my Ipad has started getting a blue screen of death. It gets a blue screen, and then shuts itself off. When it restarts, it's unresponsive for about 4-5 minutes before letting me using it again. When it lets me use it again, I have about 10 minutes before it starts all over. I'm hoping this is something that can be fixed whether hardware or software is the problem. I definitely don't want to have to spend $700 for the new iPad as good as it may be. I'm also serving in Manama, Bahrain for the next couple of years, and this island is no where near an Apple store.

    I would try to reset the iPad via iTunes, I don't think the problem is software based thou. I once had a mac mini which behaved simularly, the problem disapered when I changed the RAM, this isn't possible on the iPad thou.
    In the end, you probably have to do what Johnathan states.
    edit: I dont know if it's still this way, but ealier Apple have been giving world wide warrenty on thier mobile devices.
    link to warrenties:
    http://www.apple.com/legal/warranty/

Maybe you are looking for

  • Can we configure the new time unit in invoicing plan in OM7R

    SAP has provided the four time units in Define Rules for Date Determination (OM7R) which are 1- Day, 2-Week, 3-Month and 4-Year, I wanted to have the new time unit like "Quarterly" and "Half Yearly". Would somebody guide me on this how to get these n

  • After change in customization 'OR' activity not starts in parallel

    Hi, I made a change to a custom process 'AME Request Approval Process' for expenses workflow, the workflow works well but when I see the 'AP Standar Expense Report Process' which I didn't touch, I can see that the activity "Receive Expenses Submit Ev

  • Playing sound using ActionScript 3.0 (newbie)

    I have a Flash animation I've created, and at the last minute we have decided to add one audio track to the background.  The problem is, I have a looping animation in the timeline, so simply inserting the audio into a layer in the timeline will not w

  • OS X LION and Time Capsule

    I have a 2TB Time Capsule (wi-fi), and cannot use it with OS X Lion!  It says the airport utility is not compatible with my operating system.  What do I do now?  Is there a solution to this issue?

  • Target and Source Table - Query from ODI Repository

    Hi folks, Can anybody help me? I am trying to query the following from an ODI 11g work repository: All tables and for each table the tables that are listed in designer as "filled by" (don't know the exact translation as I am using a german ODI design