IPad & iPad not connecting to iMac 21.5 Mavericks via USB!

My iPad 2 and iPhone 5 are not connecting properly to my new iMac.  They have connected with USB cable without issue over the last couple of days, but today, as soon as they connect to the cable they both just flash on/off/on/off/on/off.  It is like the cable is dodgy or not pushed incorrectly!  However, I have tried several cables with both devices with no joy, and strangely my wife's iPhone 4S connects and stays connected without problem!
Help!!

Hello joc3554,
Thank you for using Apple Support Communities.
For more information, take a look at:
USB and FireWire Quick Assist
http://support.apple.com/kb/ht1151
USB: Troubleshooting Error Messages
http://support.apple.com/kb/TA25618
Have a nice day,
Mario

Similar Messages

  • Ipad not connect with computer. error number (0xE8000084), ipad not connect with computer error number (0xE8000084)

    ipad not connected to computer. erreo number (0xE8000084)

    Hello Mohamed Abdo,
    It sounds like you are unable to connect your iPad to the computer because you get this error code when you try. I would use the troubleshooting for these types of errors from the following article:
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
    Start with these steps, and there are additional steps in the article if you need them:
    1. Restart your computer.
    2. Install the latest version of iTunes.
    3. Verify that your computer meets the minimum system requirements. iOS devices require the following minimum version of Windows:
    Windows XP Service Pack 3
    Windows Vista
    Windows 7
    Windows 8
    4. Download and install any available software updates from Microsoft.
    5. Connect the device directly to your computer; not to an external USB hub. Find out if your computer has USB 2.0 ports.
    6. Check that the Dock Connector or Lightning Connector on both the device and cable are clean of any lint or other debris. If possible, connect your device using a different Apple 30-pin to USB cable or Apple Lightning Connector to USB cable.
    7. Disconnect other USB peripherals from your computer, with the exception of your keyboard and mouse. After disconnecting these peripherals, restart your computer, connect your device, and open iTunes.
    8. Connect your device to a different USB port on your computer.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Ipad not connecting in itunes

    Ipad not connecting to itunes, but is recognised thru Win Explorer while connect to computer? Any advice to resolve?

    Thanks for response. I have uninstalled itunes and re-downloaded (13/5/2011). I did have the latest version previously.
    New itunes loaded. I tried connecting ipad once itunes is open, but still itunes is not recognising IPAD. Ipad is connected to computer - visible still through Win Explorer.
    It is noted once IPAD is connected "Autoplay" via Windows 7 opens up. Itunes is not listed as a default to open files.
    I have tried all ports on computer, and new cables  - no luck. I welcome some further feedback. The itunes connecting to iPAD about 10 days ago when I last connected.

  • HT201263 forgot passcode on ipad and i cannot restore  because it says ipad not connected to net

    forgot passcode on ipad and i cannot restore  because it says ipad not connected to net

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • HT4235 my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection? i just want it to connect to my itunes again!!!

    my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
    i just want it to connect to my itunes again!!!
    Thank you to anyone and everyone that manages to help!

    Hello webster995,
    Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes.  I recommend following the steps in the article below to troubleshoot the issue you described:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • After setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What;'s going on?

    after setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What's going on?

    Regarding the USB, see if zapping the PRAM helps.
    Regarding your storage space check out the following: 
    HD Space Checkers:
    Disk Inventory X (FREE)
    WhatSize (SHAREWARE)
    OmniDiskSweeper (FREE)
    GrandPerspective (FREE - donation)
    Mac Performance Guide
    Slimming your hard drive
    ===============
    Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
    http://www.youtube.com/watch?v=fO-mlLApEuk

  • When I connect my iMac to my Macbook  via "Go" I see multiple versions of my iMac.

    When I connect my iMac to my Macbook  via "Go" I see multiple versions of my iMac.... I mean LOTS!  They just keep growing!!
    iMac 27 OSX 10.10

    Sounds like a cable problem. Try another cable and another USB port too.

  • Since upgrading, both our wireless printers are still visible, but OSX will not connect with them.  Both work via connecting from other sources via the same wireless router (airport).  What do I need to do to get my printing/scanning working again?

    Since upgrading, both our wireless printers are still visible, but OSX will not connect with them.  Both work via connecting from other sources via the same wireless router (airport).  What do I need to do to get my printing/scanning working again?

    First thing to try is reset Printing System:
    OS X Mavericks: Reset the printing system
    Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1.

  • My phone will not connect with iTunes when plugged up to usb cord it will only charge on pc and mac

    my phone will not connect with iTunes when plugged up to usb cord it will only charge on pc and mac

    If the device isn't be recognized by itunes, try following the troubleshooting steps in one of these articles
    http://support.apple.com/kb/TS1538 for windows
    http://support.apple.com/kb/TS1591 for mac

  • HT1296 My itunes on my pc is not recognizing my iphone being plugged in via USB, what do I do?

    I am trying to connect my iphone to my pc via USB to get my pic's on my pc.  I have done this before with no problem. I simply plugged in my iphone and a pop-up came up in the bottom right corner of my computer screen saying device recoginzed (or something like that). I clicked on it and hand no issues. Now when I plug in my iphone all it does is show on the phone like it's being charged but no pop up on my computer. I even went into itunes and it doesn't recognize it there either. Usually I go to my library and in the right top corner there is a "Device" button to click on but it's not there anymore. What should I do?

    iphone lock secreen in unlock and connect pc or mac. pc. compter / photo maneger , photo wiew , camera mac open  iphoto , i pıc . transfer connect ..  

  • Ipad not recognized on imac

    When I had to reset my IPAD( couldnt remember my password), my iMAC does not recognize my Ipad and unable to sync any music, apps etc.
    I have tried everything, what is the next step?

    Correct on Ipad assumption; not recognized on my Imac or Mac Pro.
    Also, my Mac Pro has Itunes11 installed correctly, still didnt matter.
    I have to figure out how to uninstall Itunes on my Imac, somehow its corrupted.
    When I move Itunes to Trash, I get the message that ITunes cannot be modified or deleted bc its required by Mac OS......
    So, its two problems.
    IPAD not recognized and Itunes not loaded to R11 on Imac and unable to uninstall/re-install.
    HELP....

  • IPad not connecting to iTunes

    Hi There- Can anybody advise me on how to get iTunes to recognize my iPad when I hook it up to my computer. Since upgrading to iTunes 12, I can't get my iPad to connect and sync. Thanks for you help in advance.
    Sincerely- Douglas Ward

    Hey there Dward1,
    Since iTunes is not seeing that you have plugged in your iPad on your PC, I would recommend the troubleshooting in the following article, named:
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • TS3274 NEW ipad "Not connected to Internet" ?  How do I resolve

    New ipad was connected , I think correctly but now when ipad is on it states internet  not connected  How do I eithe connect to wifi - or be able to contact support without connection?  AND some apps ie. Reminder and calendar appear to be in French all others in English

    I do not understand about having to pay for internet. The iPod has no native internet. To connect to the internet it needs a wifi hotspot/router. Are you trying to connect to a wifi hotspot that chargers money and requires a credit card? If so then you need to talk to the providers. If that is not it then provide more information.

  • Ipad not connecting to Internet, but all other devices are

    I'm using the original airport express...have a macbook pro and ibook connected to the wireless network and everything works just fine.  Had my ipad 2 connected last night and it was working great.  All of a sudden this morning it started showing a full airport signal but get a "Cannot Open Page...not connected to the internet" message. 
    In my ipad settings under my network I'm getting an IP address and Subnet mask but nothing under Router or DNS. 
    I have tried resetting ipad, airport, and router.  Have tried renewing lease, and forgetting network. 
    I've been searching the internet for hours for other suggestions and can't find anythingt that's working or that I understand.  Any help would be greatly appreciated.  Thanks in advance. 

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Want to use iPad to connect to IMac

    This is new to me, so be nice. I have an airport extreme that works fine creating a home wireless network for my laptop and iPad. My G5 iMac is connected via ethernet directly to modum. I want to be able to connect directly to the iMac using the ipad (wirelessly) both at home and on the road. This would be to access files (movies) etc. Help. Thanks
    Message was edited by: Gabe Renga
    Message was edited by: Gabe Renga

    perhaps this thread can provide pointers: http://discussions.apple.com/thread.jspa?threadID=2422327&tstart=0.
    JGG

Maybe you are looking for

  • Error in Call Adapter (IDOC- XI- FILE)

    Hello, i have got the following error message in the integration engine monitoring in the "call adapter" part:    td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active HTTP response contains status code

  • City ID - Subscription or Continue Free Trial

    An app that came preinstalled on my Droid X called "CityID" has taken over my screen on its own. I don't believe I launched this app. The screen is telling me that I either should subscribe to City ID for a monthly fee, or I can "continue free trial"

  • What are the differences between JSF1.1 and JSF 1.2

    As I am using JSF 1.1 version wanted to know what are the new features 1.2 version is providing.

  • Need concrete sample for enhancements in ECC 6.0

    hi, I am not able to clearly understand this enhancement technique. For e.g. I go to ME21N and click on menu System--> status, click on the program name " SAPLMEGUI ". I see some enhancement points/spots. ENHANCEMENT-POINT SAPLMEGUI_01 SPOTS ES_SAPLM

  • Pixel Bender is NOT installing Please help!

    I have The Creative Suite Version 5.5, which includes Photoshop CS 5.1. I'm trying to install the Pixel Bender Plugin for Photoshop CS5.1. I run at x64 bit and I'm attempting to install the correct plugin version. However, when I double click on the