IPad/iPhone Not Appearing in iTunes After Updating iOS from 8.0 to 8.1.1

After updating my iPad and iPhone from iOS 8.0 to iOS 8.1.1, neither device will show up any longer in iTunes. After the update completed, I received the following error message in a pop-up window:
"iTunes could not connect to this iPhone. An unknown error occurred (0xE800001F)."
I've restarted both devices and my computer and have the most up-to-date version of iTunes installed. I'm on a Windows 8 PC.
Any suggestions?

Hey samuelayres,
Thanks for the question and detailed information. You’re in luck, we have a support resource that includes troubleshooting steps for this exact issue:
iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
http://support.apple.com/en-us/TS3221
Thanks,
Matt M.

Similar Messages

  • Iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

  • IPad mini not recognised by iTunes after updating to iTunes 11.1. All other devices are recognised...

    After upgrading to ios 7, adn iTunes 11, I had some problems with both airplay and having my ios devices not recognised by iTunes. After a few fixes (re-installing Apple Mobile Device support ) manually, all is now looking good, apart from my iPad mini.
    Windows recognises it when I plug it into any of the USB pports on my PC, however iTunes does not see it. The device is recognised by iTunes onother windows and Mac computers I have.
    Is it posible to isolate which driver is being used by the mini, and uinistall it? I guess that if Windows sees the device as a "new one", it will re-install the device driver, and probably fix this issue.

    Hey there BeakyGB,
    Thank you for using Apple Support Communities!
    Great troubleshooting done so far. I would next try this article named:
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    Cheers,
    Sterling

  • IPhone not recognized by iTunes after update

    I recently downloaded & installed the latest update for iTunes and it actually removed iTunes and put and extra (& useless) shortcut for quicktime in my desktop. I uninstalled everything and reinstalled iTunes and quicktime with nor problem. I hooked up the iPhone and downlaoded the latest update for it as well and it crashed during the installation of it. I have since had to reboot on my roomates pc and it will not be come up in iTunes. My computer still recognizes it though. I have gone through all the steps in apples site and microsoft and have no clue what to do now. I use this thing all day every day and need the music and video capablities for "work" purposes. If anyone can help, thanks.

    Symptoms:
    iPhone not recognized by iTunes on Windows computer, however an iPod will.
    The iPhone CAMERA appears in windows My Computer - but nowhere else.
    Problem:
    The Apple iPhone Driver has been replaced by a Microsoft Driver which enables the camera/storage, but did not allow it to connect with iTunes.
    SOLUTION:
    From Device Manager, Select the iPhone (under imaging/Portable Devices) and then select "Update Driver", Don't direct it to automatically search for a driver, instead, manually point it to search in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers - It should then "do it's thing" and install the correct apple driver - voila - iPhone is then recognized.
    G-Man

  • IPhone not appearing in iTunes after 3.1 update

    Hi everyone....I went to update to the 3.1 OS for my iPhone 3G but during the update it got stuck at the "connect to iTunes". I have uninstalled iTunes and AMD services multiple times. I managed to restore the phone but after the restore it doesn't appear in iTunes and the screen is now stuck at "emergency call" now and "connect to iTunes" and can not restore my back up data. My computer doesn't seem to recognize my phone at all but does recognize my iPod touch. If anyone has any sugestions on how to get it to work I would appreciate it because I really need to get my phone working properly.
    Message was edited by: APHL

    I'm having a similar problem. I was running the same update. Not only does I-Tunes fail to recognize my I-Phone, my I-Phone is not operable. It just displays the moving circular icon in the middle of a black screen, as if it's doing something. What a drag.

  • IPhone not appearing on iTunes after IOS 5 update

    After installing IOS 5 iTunes update the computer asked to re-start my PC.  I beleive that my connected iPhone 3GS was still updating so, when the computer re-started, the update to the phone terminated.  After re-booting iTunes has been updated but my iPhone just has the image of the USB cable and the iTunes logo on it.  Nothing I now do makes the iPhone appear on the iTunes directory.  I have successfully installed the new firmware onto another iPhone 3GS but the original phone is unresponsive.  Anyone know how to install the software onto the phone when it doesn't appear on the iTunes directory?

    i have the same problem. although my mac didnt ask for restart, installation stopped half way through the updating, and it comes up with unknown error 1 , once ive managed to exit recovery mode( the usb and itunes logo) apple logo appears, and then its loading and THEN ITS TURNING ITSELF OFF and ON - > after that apple apears - loading... and yeah goes in circles.
    I've tried to restore previous copy but itunes wont let me do it anymore, it comes up with an error.
    I've edited hosts, and it's still not working.
    ... any ideas anyone?

  • Iphone not recognized in iTunes after update problem

    I tried to update my iPhone 4 through iTunes to the recent update, but my computer crashed in the middle of the update. Now when it restarted, my iphone only has the connect to iTunes picture on the screen and when I plug it into my computer it makes the noise recognizing it's plugged in, but iTunes won't recognize it. How can I get it to recognize the iPhone then finish the update?

    I had the exact same thing happen to me, I was able to get the phone to work, but it will not connect to the computer.

  • Iphone not appearing on itunes after hdd replace

    Hi
    So I replaced my hdd on my macbook pro.
    I used carbon copy cloner between my old hdd and my new on whilst it was in a caddy.
    Anyway, everything trasfered over fine but when I plug in my iphone it doesn't show up, any ideas?
    I don't want to lose any data on my iphone like photos or notes or any text messages etc.
    Can anyone help me out?
    It's an iphone 4

    Check for updates on your computer, if they are good. Make sure itunes is up todate. then restart.
    that should fix the issue.

  • TS1538 My the new ipad does not appear in itunes,  Pls help

    My ipad does not appear in Itunes to restore or back up data. Thestatus of my device are:
    - updated the latest Itunes version 10.6 .
    - tried to restart Apple Mobile Device in Window but it still doesn't work.
    - Could not restore in DFU becasue the window doesn't recognize ipad. It appeared cable & itunes disk images but it itunes does not recognize.
    - When i pluged the ipad in my laptop, window could not reconize ipad neither.
    Please help to solve it!

    Let me summary what i have done in the last few days to try to fix the issue taht the new ipad does not appear on itunes 10.6 so that you guys can have an overview to help me :
    - removed previous itunes together with Apple Mobile Device and Bonjours
    - Reinstall latest version Itunes
    - restart computer (for sure the problem not from laptop becasue my other new ipad and iphone4 stil work well with itunes)
    - tried using recovery mode when the iPad is connected with computer and iTunes open; Keep the Powerbutton and the Homebutton pressed at the same time until see the Apple logo on  iPad screen.Then wait for about 10 minutes (i repeat this step many times). Ipad is turned on but  still not connect to itunes or no notice board appeared on itunes to start restore
    - I changed the usb cable/port...nothing change
    status of device is:
    - battery is fully charged
    - My laptop (window 7)
    - All what i can get is the ipad is charged when i plug in laptop.
    - no apple device is recognized on "my computer" window
    - no images tab is pop up as usual to copy photo
    Apple experts ...help me...pls...

  • My ipad does not appear in itunes

    my ipad does not appear in itunes but the computer recognises it

    I had the same problem. found a dozen different solutions in various forums. None worked.
    One of the official responses TS1538 came very close and sounded promising. I found that the usb device did not appear in device manager. The ipad appeared only in the imaging devices.
    The instructions were to right click on the entry in images and update the driver, pointing at
    program files\common files\apple\drivers\usbaapl.inf.
    This told me that my device was not found in the driver. date on the files was 2009. date on the files in another pc which worked was 2011.
    I had already re-installed itunes, which I thought should install the necessary driver.
    Decided to fool it. copied the files in the above folder and then deleted them. Then re-installed itunes again.
    Fixed.
    So why doesnt itunes installation over-ride the old files?
    Why doesnt apple tell us about this fix.
    Why did I buy and apple?

  • My ipad is not appearing in itunes...(in fact there are no "Devices" in the itunes at all) ... any suggestions?

    my ipad is not appearing in itunes...(in fact there are no "Devices" in the itunes at all) ... any suggestions?

    Peter-
    Did it ever work?  What version of iTunes are you using?  (The latest is 10.3.1 as of today.)
    You might have a defective cable.  I suggest you try carefully disconnecting and reconnecting it to the iPad, to be sure it is making good contact.  If you have the iPad 2, there is a slight compatibility problem with the old dock due to the shape of the iPad 2's bottom.
    Fred

  • My ipad is not appearing in iTunes

    My ipad is not appearing in itunes - only appears in Iphoto
    any help out there?

    Device not recognized (Windows)
    http://support.apple.com/kb/TS1538
    Device not recognized (Mac)
    http://support.apple.com/kb/TS1591?viewlocale=en_US

  • My iphone 5s lose Touch-id after update ios 7.1 . What should i do now ? My Iphone is from HongKong but now i lives in Viet Nam . Is there anyway that I can transfer my Iphone to Apple Hongkong

    Pls help me
    My iphone 5s lose Touch-id after update ios 7.1 . What should i do now ? My Iphone is from HongKong but now i lives in Viet Nam . Is there anyway that I can transfer my Iphone to Apple Hongkong

    In iOS 7.1, the setting has changed locations and is in the same grouping with General, Wallpapers, etc. Also, if you have not set a passcode, you cannot see or set Touch ID. If you restored the phone as new and it still does not provide you the option to set a passcode, and then Touch ID, then it is possible there is a hardware error. Since you purchased the device in Hong Kong, as described before, you can only get a friend/relative to take it to Apple, or you will have to do it yourself. Unfortunately that is what can happen when you need warranty work and have purchased a device outside of the country that you live in.

  • How to fix iphone 4s wifi grayed out after update ios 6.1.3

      how to fix iphone 4s wifi grayed out after update ios 6.1.3 ?
    for this problem , I try to fix several ways that hope can fix . it come form internet , youtube ,some one told , such as use lamp app , airplane mode , and freezing but it can not work anymore .

    http://support.apple.com/kb/ts1559
    After following the steps included with the link provided, if you are still unable to turn Wi-Fi on, please contact Apple for support and service options.

  • IPad does not detected by iTunes on Updated Windows 7

    Hi All,
    Since i updated my MS Windows 7 with the latest patches, my iPad can not detected by iTunes on my PC.
    The USB ports on my PC were fine, the peripheral (eksternal HDD; USB Flash disk; Printer) still working fine.
    The USB sinc cable data is also working fine when i charge the iPad directly from wall mounth port.
    Do you have a same experience?
    Please advise....
    Thanks and regards

    Folks,
    I had this problem with my PC (windows 7, 64-bit) and my iPad. After messing with it for a long time, I finally found the answer (bad USB driver). The following two step process should help resolve these kinds of problems more quickly.
    The first step is to verify that the iPad (or iPhone) is really connected to your computer. This can be (really) checked using a program called USBDeview. You can get this (very small) program from http://download.cnet.com/USBDeview/3000-2094_4-10614190.html or http://www.nirsoft.net/utils/usb_devices_view.html. Don't worry, it's not Spyware or Malware.
    Just run the program and sort on the 'Connected' column. If your iPad or iPhone doesn't show up as Yes (under 'Connected') then your iDevice is not properly connected to your computer. Could be a cable problem. Could be an iDevice problem. Could be a USB hub problem. Note that your iDevice might be listed as what it is (iPad or iPhone) or it might be listed as 'Apple Mobile Device USB Driver' in the 'Description' column.
    Apple has a number of ideas to resolve this sort of basic connectivity issue, including switching USB ports, resetting your iDevice, rebooting your iDevice, rebooting your computer, etc. You will need to try them until your iDevice shows up in USBDeview as 'Yes' under Connected.
    If you iDevice shows up as 'Yes' under connected, it should also be visible in the Device Manager (found in the Windows 7 Control Panel under Hardware and Sound). You might find it under Portable Devices or it might be under Universal Serial Bus controllers.
    The iDevice may or may not show up in the Windows Explorer. On some machines it does, on others it does not. Why is not clear.
    If the Idevice is properly known to Windows and iTunes can't see it, then any number of other things could be wrong. Apple has a list. See the very useful page over at http://support.apple.com/kb/TS1538. Testing shows that the Apple Mobile Device service must be running. Check this using Task Manager (started by right clicking the taskbar). Note that the iPod service and the iphlpsvc service must also be running. These services have different names under the Processes table versus the Services tab of Task Manager.
    AppleMobileDeviceService.exe - Apple Mobile Device
    iPodService.exe                     - iPod Service
    ItunesHelper.exe                    - iphlpsvc
    Step 4 of http://support.apple.com/kb/TS1538 checks if the Apple Mobile Device USB is installed. This is essential and a common source of problems. In at least some cases, Windows will install the 'MTP USB' driver. Indeed, Windows will reinstall this driver if you uninstall it. The MTP USB driver is essentially a Windows bug (possibly caused by Microsoft). You MUST replace the MTP USB driver with the Apple Mobile Device USB Driver. Step 4 explains how to do this. Note that you MUST use the 'Have Disk' approach. Otherwise, Windows will just reinstall the invalid MTP driver.
    The Apple doc indicates that you can find the correct driver at C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. Perhaps this is correct on some systems. You may find the correct driver in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
    iTunes could make this a lot easier by checking if the iDevice is known to Windows (what USBDevier does) and if the Apple Mobile Device USB driver is properly installed for the iDevice. Sadly it doesn't perform either check. Note that iTunes does if some of the related services (see above) are actually running.

Maybe you are looking for

  • Ipod not recognised by Windows, USB device not recognised

    Hi hope someone can help I have recently received my ipod back from Applecare who have sent the ipod back in ' working order ' but it will no longer be recognised by my windows. It says USB device not recognised and i cant find, nor will it install d

  • BT Infinity - Slow - and resyncing often

    Hi everyone. I just got BT Infinity installed today (14.23) It was working fine for a few hours. I ran a speed test and the test varied 9mbs to 60mbs and the ping was 20/22ms. But now the speed has dropped significantly. Also the hub broadband light

  • More than 2GB of RAM?

    I have a 20"2Ghz iMac ALS with 2GB of RAM. Can I upgrade to 4GB? Thank you.

  • In using BAPI_SALESORDER_SIMULATE?

    Hi guys, what are the parameters to be imported in using BAPI_SALESORDER_SIMULATE? thanks a lot!

  • MigratingBW to BO but not from the BW system from R/3 system.

    Dear sap, we are migrating the Reports from BW3.5 to BO but the thing is we want to take data from the cProjects . few functionmodules are there like dpr_bw_get_transaction.they are normal functionmodules. need to get the data from tham if we create