IPad/iPhone won't print to HP Photosmart Premium (C410a)

I just bought an HP Photosmart Premium All in One printer (C410a).  I got it all hooked up, using wireless and I have set a manual IP for it.  I have a 2nd generation AirPort Extreme router which is only set to run DHCP from .100 to .200, I have the printer set to always be .210.  My Windows 7 and Windows XP machines can install and print to the printer just fine.
However my iPhone 4 and iPad 2 cannot print to it.  I was able to print one picture directly from the iPhone and it worked amazingly well, I have not gotten anything since.  Any document/picture I try to print doesn't go through.  AirPrint finds the printer just fine, it says it is sending the document to the printer, but then nothing ever pops out.
I've cycled the router, printer and both devices multiple times.  The two Windows machines remain able to print to it the whole time.
Any ideas?

Should have mentioned I already updated the firmware, sorry about that.  It shows that I am currently using the most recent version, no update needed.
As for the print center app, I had no idea it was in that list.  I opened it up and it shows the photo/document I'm trying to print and the status just cycles between "Printing 1 of 1..." and "waiting".  I can cancel it, but trying again does nothing.
Thoughts?

Similar Messages

  • Mirror Image Printing - Photosmart Premium C410A

    How can I print the mirror image on a Photosmart Premium C410A for a t-shirt transfer?

    UPDATE: Looks like the second problem (where once right justified is selected the content prints ~2" too far to the right) is caused entirely by the auto duplex setting.  If I turn the auto-duplex, the envelope prints correctly.
    This appears to another issue I posted earlier (http://h30434.www3.hp.com/t5/Other-printing-questi​ons/Photosmart-Premium-C410a-Margins/m-p/502919#M3​... where the top and bottom margins are increased whenever auto-duplex is enabled.
    HP, can you PLEASE have someone look into both of these problems?
    Thanks.
    Steve

  • TS1398 My iPad & iPhone won't connect to iTunes store.... it worked just fine earlier today... but not now. Nothing has changed.  I've gone through all of Apples suggested troubleshooting guides but it still won't work! Help?

    My iPad & iPhone won't connect to iTunes store.... it worked just fine earlier today... but not now.
    My daughter also has an iPad and an iPhone and these too won't connect either (use the same iTunes account)
    Nothing has changed since this morning,  I've gone through all of Apples suggested troubleshooting guides but it still won't work!
    Help?

    p.s.  I just signed out of my apple id on daughters iPad and tried to create a new apple ID and still got the message CANNOT CONNECT TO ITUNES STORE......    
    so is this a problem with apple rather than my devices? Just seems weird that all our apple devices are doing this this afternoon when they were just fine this morning.......
    P.P.S  Just got a text from a friend with iphone and ipad......they are having same issue so at least I know it's not just me, so what's going on here APPLE?????

  • ICC profiles for Photosmart Premium C410a

    I have a Photosmart Premium C410a and previously had a C309 series.  I am using Windows 7 Ultimate (64 bit).  I am trying to print from Photoshop Lightroom 3 using the managed by application setting which requires ICC profiles for the printer. When I access the "Choose Profiles" window no ICC profiles appear for the C410, but the profiles I used for the old C309 do appear.
    How do I find the ICC profiles for the C410 and load them onto my computer?
    Thanks for your help.

    Thanks for the links ... it is a start in right direction, except they say to selct printer & paper profile ... and that is the issue - there are none.
    The issue for me is that when I select Print within photoshop ... I get the color management options ...
    http://i771.photobucket.com/albums/xx351/Tafflad/Computer/setingsfortestprint.jpg
    You can see the option on right for "Color Handling"  it is set to "printer manages color"
    Ideally I should be setting this to "Photoshop manages color"  and under "printer Profile"  choose the correct printer/paper combination ...   i.e. something like  HP-C410 glossy  or HP-C410 matte
    There are no ICC color profiles there for HP.
    I have downloaded and installed the full HP driver package for the printer.  (for PC W7)
    Hence my question (and the original posters) do HP have ICC profiles available .... epson produce them for their printers for example.

  • I have just converted from PC to iMac. Yay. But pls be nice to me; I am back to newb! Running Lion. Have connected a Time Capsule as both a backup and WAP. I want to be able to join the network with my iPad, iPhone, iPod to print. How can I do this?

    Can I do this using the Time Capsule. I am not tech, so bear with me. Can I get the iPad to connect wirelessly to the TC, which connects wirelessly to the Canon MP495? Or, can I connect/network the iPad to the iMac to print?
    Either way, or if there is any other solution, I would appreciate if someone would walk me through it, or point me to a plain-speaking resource.
    Thankyou.
    Actually, one more: I would like to connect my HP laptop as well. I have heard this is not simple, but possible.

    You can create a wifi network with your TC, and you can join this network with your iPad. However, your printer does not support the AirPrint protocol, so you will not be able to print from your iPad, unless you load additional software.
    These are the steps:
    1.  (You may have completed this step already) Set up your TC to create a wireless network. You can do this from AirPort Utility on your Mac or from the AirPort Utility App on your iPad (free download from the App Store).
    2. From your iPad, go to settings / wifi and join the network.
    3. Download the Canon iPhone App from the App store on your iPad
    4. You can now print photos from your iPad to your Canon printer.
    If you want full functionality, (not just photos), there is software for your Mac that makes your printer available to your iPad through AirPrint (Printopia). The downside is, you have to purchase it, and you have to have your Mac running when you want to print from your iPad.
    Good luck!

  • Blank ink won't print on 5520 Photosmart

    I have done everything....cleaned, aligned, checked and double checked.  I have installed four new cartridges, and my black still won't print.  Everything was fine and then all of a sudden my 'old' black wouldn't work (it was only 1 month old), so I printed a couple of printhead and alignment pages.  No changes.  Still no black.  So I went out and purchased all new cartridges (and all HP) and a substantial cost.  The problem is still there.  I don't need to know about the four steps, etc as I have done them all at least three times.  When the alignment sheet is printed, all I get is blue and a couple of red words at the bottom of the page.  Should I just give up, throw this *!*!*!*!* away, and start using my Canon?  I am so frustrated that I could just cry

    As this is a 5520 I'd advise calling HP Phone Support about, regardless if it's out of warranty, as you may require a replacement printer.
    Can you please let us know how you get on?
    Thanks
    Ciara
    Troubleshooting
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=ie&lc=en&dlc=en&docname=c03955472
    Phone no.s
    http://welcome.hp.com/country/us/en/wwcontact_us.html
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Printing envelopes on photosmart premium all in one

    I have a new Photosmart  premium all in one printer, and I'm trying to print #10 envelopes.  Sometimes they print and sometimes I get a message that the main paper tray is empty and needs filling even though there are plenty of envelopes remaining.  The last six attempts have failed. Any ideas?

    I will need a little more information in order to help out. Did you also clean the contacts inside the printhead where the ink cartridges are seated? Did you notice any specific ink cartridge leaking? What materials did you use to clean the inside of the machine? When, you had the printhead out, did you take note of the warranty ends date listed on it above the contacts that you cleaned? If that date has not expired, I would contact HP Total care as this is a print quality issue that you are having and would be covered under that printhead's warranty. If not still in warranty, please reply back and provide that warranty date in the post and I can provide further assistance based of the date. At the end of this post, I am including a link to a document that shows the proper materials to use on the printhead when cleaning it and lists the steps on what to clean and what not to touch just so there is a point of reference to that procedure for you to look at the check off what you have attempted. I know that that title of the document is not the error that you are having, but it illustrates that process well. Here is that link.
    http://goo.gl/2WuI9
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Extremely slow wireless printing with HP Photosmart Premium C309g-m

    I'm seeing extremely slow print speeds when printing wirelessly from a Mac or a Windows XP system to a new HP Photosmart Premium C309g-m printer. The printer begins printing immediately when I request a print, but it only prints one line. It will then take about 15 minutes to print the rest of the page, printing each line after a very long pause. Demo page printing doesn't exhibit this problem, only documents from programs like Word 2008, Safari and Firefox (tried firefox on PC and Mac) are affected.
    If I connect to the printer through a USB connection it prints fine, so this problem appears to be with wireless printing only.
    Printer: HP Photosmart Premium C309g-m
    Computer: Mac mini (Late 2009 model) (also tried a Windows XP laptop as a comparison, using latest drivers from HP's website)
    OS: Mac OS X 10.6.2 with all available updates installed
    Computer connection method: Wired Ethernet connection to wireless router
    Printer drivers: version 2.2.1 (Apple supplied, HP drivers never installed as system shipped with 10.6)
    Wireless router: Apple TimeCapsule (Early 2009) 1TB, running in a/n and b/g modes on 2.4 and 5GHz. TimeCapsule is in bridging mode as the DSL modem handles DHCP service
    Encryption: WPA2 Personal, no MAC filtering or hiding of the SSID.
    IP addressing scheme: All addresses are handed out by DHCP server with no reservations of any kind
    The TimeCapsule is sitting three inches from the printer and the printer indicates full signal. Connection of the printer to the wireless network and setup of the printer on the Mac went without a hitch. Only when printing a test document did we discover the problem. The wireless network is behaving as expected when accessing the Internet from both Mac and Windows devices (tested with a Dell laptop running XP and a MacBook running OS X 10.6.2), so I don't see any overall problems with the wireless network.
    Attempted remedies:
    1. Rebooting and powering off, waiting, powering on computer
    2. Resetting the print subsystem, turning the printer off and on again and reinstalling the printer
    3. Unplugging power from the printer and letting it sit for several minutes before trying to print wirelessly.
    None of these worked.
    This question was solved.
    View Solution.

    I don't think there is anything wrong with the DSL modem HW.  There might be an issue with how print data is being routed though.
    Please try the second experiment where you blank-out the default gateway and DNS entries from the printer's internal web configuration page.  Open the printer's internal web page by browsing to its IP address.  Select Networking and then Wireless (802.11).  Under the IPv4 Configuration tab, select Manual IP:
    For Manual IP Address, use the existing printer IP address.
    For Manual Subnet Mask, use 255.255.255.0
    For Manual Default Gateway, leave blank.  This is important.
    Select Manual DNS Server:
    Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty.  This is important.
    Press Apply.
    Turn off the DSL modem, the printer and all computers connected to your network.  Wait 60 seconds then turn on the DSL modem and then turn on the printer.  Then turn on the computers.  See if this corrects the printing speed.
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • Printing with the photosmart premium C309

    I have a HP photosmart premium series C309 printer and sometimes it prints pages in black and sometimes it prints in cyan. Help!!

    I had a different but simllar problem with my c309 awhile ago. Check regular black ink level,no matter what the software says the level is,or possible dirty cartrige (black) Good luck!    Larryt64

  • Wireless Printing Problems - HP Photosmart Premium Web C309n

    I hoping someone can help me with some printing issues I am currently having with my C309n.
    When trying to print via my web browser (Firefox 3.5.7), the printer stalls while trying to respond, and when it does begin to print, it moves incredibly slow. I had the same problem when I first set up the machine when trying to print photos, but that issue seems to have resolved itself (I did nothing in particular; one day it just worked). I have no problem printing from programs such as Word, PowerPoint, etc.
    The web printing issue still remains and I was hoping that someone could confirm that I have used the optimal wireless/set up settings before I start changing things in an attempt to solve my current problem. Also, of course, if anyone is aware of a quick fix for my printing issue, I would appreciate it.
    Printer: HP Photosmart Premium Web - C309n
    Computer OS: Windows 7 x64 Professional
    Anti-Virus: Norton 360 Premier
    Connection: Wireless
    Type: Automatic DHCP
    Port: 9100
    Router: Linksys Wireless-N Gigabit Router (WRT310N)
    Firmware: v1.001
    Settings of Router are as follows:
    - Network Mode: Mixed (a, b, g, n)
    - Security: WPA2 Personal
    - Encryption: AES
    - Radio Band/Wide Channel/Standard Channel: Auto
    Also, I apologize if I provided too much info; just wanted to make sure I covered everything. Thanks in advance for any help.

    I'm also having slow print issues on the HP Photosmart Prem-Web C309n-s.
    The issue happens in multiple applications, such as printing a photo from HP Photosmart Essentials 3.5, printing an email from Internet Explorer 8, etc.  I am running Windows Vista Ultimate 64-bit with Service Pack 2.
    Also, noteable is that it happens on 2 PCs.  Same model purchased at the same time.  The issue seems intermittant and it seems to affect my wife's PC more than mine.  It may just be that she prints more???
    I did not think it was a networking issue, but both my PC and printer are wireless.  I will direct my PC and see if the issue goes away.
    My wife prints all her own photos and scrapbooks.  She is extremely frustrated and wants it out of the house.  I'm going to contact HP Support tonight.  If they cannot fix it in a reasonable time, I'm going to try and return it.
    It also seems to rip through XL ink cartridges faster than any HP printer we have had.
    Best regards.
    BarryISU

  • IPad & IPhone 4s Air print Issue

    I have just bought a HP 6520, I''ve followed the instructions for the Printer, My MAC Pro works but then I hard wired it and installed the software with a Disc. This all works fine.
    I've tried to print from my ipad 2 and Iphone 4s but it's unable to find AirPrint. I've tried turningoff the router, Printer, Ipad and Iphone, left it for a while then one by one starting with the router switched them all back on, and still no Air Print Found.
    I've got the APP for this but when we bought the printer the Sales Person demostrated to us with his Iphone and was able to print from his phone without using the app.
    Please could someone suggest what I could try next

    for more info, check this article: http://support.apple.com/kb/ht4356
    for this information:
    Additional Information
    If you are unable to print, or if you see the message "No AirPrint Printers Found"
    Verify that the printer:
    Has power and is turned on.   If it has power, turn the printer off and then on again to see if that resolves the issue.
    Is connected to the same Wi-Fi network as the iOS device.
    Has the latest firmware version installed.
    Has paper with enough ink or toner installed.
    Is free of any errors displayed on the printer's control panel.
    If necessary, consult the printer documentation or contact the printer vendor for help with  the above steps.
    Notes:
    Avoid connecting AirPrint-capable printers to the USB port of Apple AirPort Base Stations or Time Capsules. Doing so can enable traditional AirPort printing from a Mac, but it will not enable AirPrint functions for iOS devices. If you cannot use Wi-Fi networking to connect the AirPrint-capable printer, use an Ethernet connection from the AirPrint-capable printer to the Apple AirPort Base Station or Time Capsule.
    Wi-Fi printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the printer is connected to the Wi-Fi network before attempting to print.

  • Eprint won't print attachments on Photosmart 6510 using MACBook ro

    When I send an email with attachments to my Photosmart 6510, it prints the email but not the attachments
    This question was solved.
    View Solution.

    What kind of attachement are you sending?
    The file types are limited to Microsoft Office (some of them), image files (jpg, gif, tiff and a couple more) and HTML formatted emails provided they do not have any dynamic material in them.  File size is limited to 5 mb for the email + attachement
    What does it say in your ePrint Center?
    Although I am not affiliated with HP, please give Kudos if I've answered your question

  • How do i get iphone 4 to print on hp photosmart c7180

    phone doesn't seem to recognize printer. any clues?

    Is this printer listed as one that supports AirPrint? Check this support document http://support.apple.com/kb/HT4356

  • BT homehub 4 and ipads; iphones won't work any ideas?

    hI im having real problems with new BT homehub 4 swapped over from EE foe same reasons, but now can logon onto network but not internet, tried resetiing the router, switched off all but one ipad and still doesnt connect, tried switching off the 5ghz changed channels and more still useless....any ideas ?

    Greg, although some methods (rice, hair dryers, etc) have been somewhat successful with water damage, there still lies the issue of safety.  Improper use after liquid damage can cause shocking, and/or shortages that can lead to fire.  I strongly urge anyone with liquid damage to proceed with extreme caution when using a device after choosing one of those methods.  The best option is to always seek a replacement.  Albeit, checking with the carrier to see if they have insurance or are eligible for an upgrade on their device, is certainly an option. 

  • Can no longer print wireless with PHotosmart Premium 410C. Used to print wirelessly no longer.

    Print out from printer button says it is all connect with network named, IP address etc.   I also cannot print from my cell phone via email any longer.  Any ideas  Set up with Windows Vista. 

    Run the print and scan doctor and check the results.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146
    Have you uninstall and re-install the software and drivers, yet?
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Maybe you are looking for

  • How to select different parts of the text? cmd button no longer does that...

    After installing Maverics i can no longer propertly edit my work as I cannot mark different parts of text using cmd button. Shift works as before for highlighting all the text from starting point to selected point but I can no longer use cmd to highl

  • PLD - AR Invoice How to show another item price from a different price list

    Hi, I am trying to print a suggested price list price, which is different to the selling price being used on the item line i.e for Item ABC on line 1 of the invoice we would like to show the selling price (price list 1) as well as the suggested selli

  • Execution problem with java.exe

    Hi everybody. I am a student in a belgian university, and i've got a problem with the execution of my binaries in the JVM. I'm developping my project with Eclipse. When I build the project, Eclipse launch perfectly my application with javaw.exe (I su

  • Deleted Wi-fi configuration on my MBA with Mavericks

    Hi I have a problem. I wasn`t able to connect to Wifi. So I was searching in System preferences in network And unfortunately I deleted configuration for Wifi and now I can not add this configuration again. What I can do with this? Thanks for answers

  • How do we build MAR file using jdeveloper ojdeploy

    Hi, I have to package the set of files as Mar file using jdeveloper ojdeploy tool. For that I create the new deployment profile (ess-meta) of MAR file archive type and selected all the required files for Metadata File Group. I am getting below error