Ipad is disabeled and it tells me to connect to itunes,and i still can get it unlocked
please can anyone tell how to fix my ipad is disabeled
What happens when you connect it to your computer's iTunes ? There are instructions on this page for resetting a disabled device : http://support.apple.com/kb/HT1212
Similar Messages
-
Hello.....my ipad is locked and i forgot the password! on my screen it says ipad is disable then under that it says connect to itunes! what do i do to unlock it?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it.
This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
My ipad is disabled and it tells me to connect with itunes. i cannot connect to itunes bc it says i need to enter my passcode. the ipad is locked up. how do i correct this?
If you do not have the password, you can only do a restore-resetting the iPad to factory condition.
-
pleassse help im locked out of my ipad2 it tells me to connect to itunes but when i do itunes tells me i need my passcode and it wont let me get into my ipad how can i restore my ipad without having to connect to itunes is there another way
If you're unable to do a Restore, go into Recovery Mode per the instructions here.
-
I am attempting to re sync my iPad2 with my macbook pro iTunes and i get all the way to where it tells me to connect to iTunes...which my iTunes on my macbook sees as connected, yet my iPad still tells me to connect to iTunes...AND yet it is connected..HELP
Your iPad is going to show "Connect to iTunes" screen until you either set it up successfully or restore it. If you've already set your iPad up in the past, "Connect to iTunes" typically indicates the iPad is in Recovery Mode and you must restore it.
-
My ipad is disabled and it tells me to connect with itunes. i cannot connect to itunes bc it says i need to enter my passcode. the ipad is locked up. how do i correct this?
http://support.apple.com/kb/HT1212
-
Please help! I've updated my ipad and it tells me to connect to itunes to complete set up. I am connected to itunes. I don't know what to do! it won't do anything! I've restarted my device several times and it does the same thing. It will say "connected to itunes" for about 2-3 minutes, then it just changes to "connect to itunes" but the device is still connected!
Hi Stacy1986,
If you are having issues updating or restoring your iPad, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
when i try to turn on my ipod, it tells me to connect to itunes and restore but a message pops up and says that i dont have an internet connection. the connection is on and it loads at 100mb per second.
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
My Ipod is disable and it tells me to connect to itunes to stop disabling it. What do I do? How do I connect to Itunes?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I am trying to download a book on my ipad. It says I need to install itunes. I have itunes already. I frequently get a message to re-install itunes. I do, but I still get the message, and I still can't get the book on my ipad.
you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads
-
My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??
You can use any computer but your data will be lost if you have no backup.
-
I have a first generation iPad and the screen went completely green on me and locked up. I was able to unlock it, but now there's a green haze all over the screen. Anyone know what the issue could be and how I can get it fixed?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
i tried to up date my i phone 4 to iOS 5 then it wiped my phone and now it tells me to connect to iTunes and that the iPhone is in recovery mode and when i connect it goes to preparing to install to iPhone but never goes any further how do i restore the phone
by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update. -
my phone is disabled because the language got changed and I kept trying to unlock it. It tells me to connect to itunes but then itunes tells me that I have to insert the password on my iphone before proceeding. I am unable to type in the password. Help!!
If you forgot your passcode, you have to use recovery mode to restore
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Lion Server Network Account loses all created files after logout
Hi, I am new to Server, I got Lion Server working on a Mac Mini and everything was alright until I added users from existing client machines. I created new Users on the Server App with the same name and passwords as on the existing client machines, l
-
Create PS Report Painter using Z fields
Hi all! Can any one help me how to create report painter from PS using Z fields which were added in table PROJ by append CI_PROJ? I need to know how to turn this fields visible to add in creaton of the variable . transaction CJEV. Thank you Best Rega
-
KM Content Transport using ICE Methodology
Hi All, I would like to transport KM content from Development to Production system. I have done following steps 1. System Administration -> System Configuration -> Repository Managers - > Advanced Oprons -> Content Exchange Repository - > uncheck "Ho
-
MacBook Pro OS X Lion not rebooting
On powering up my MacBook Pro OS X Lion presents an Apple and a busy symbol, and fails to start. My question is how can I resolve this? I've tried the Apple disc utility which reports HD ok, not sure what to do next.
-
I have successfully downloaded and executed this: http://www.ni.com/white-paper/2991/en and I know it works because I can see the pulse train on channel #1 on my osciloscope. I have modified the sample code from the website to use pulse width and fr