Ipad is  disabled and slide to upgrade

so the problem is..
after i restore with old restore
i have to enter the passcode whch is i enter of the entire pascode that ive made before.
but it cant work.
and then first time after restore the oldest data, somethng strange.
there is slide to upgrade on the lock screen.
i dont know  why and whats happend with my ipad mini. i cant reach that even with wifi.
please help me.!
after disable for 60 minutes i try with 1234 passcode as normall.. and it cant work toi have to wait 60 minutes. how to fix this things. please

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Similar Messages

  • Please help!! ipad is disabled and will not do a hard reset to go into recovery mode.

    i cannot do a force reset... When i hold in the home and sleep/wake button nothing happens, I have tried these same steps over and over again. Neither the apple or the itunes logo ever pop up.. The screen just stays black. I recently replaced the digitizer after my son cracked the screen. I have made sure that nothing was injured during repair. I did put the digitizer ribbon in wrong and then the screen was not working correctly. I had put the ribbon in backwards. So after the first wrong installation of the digitizer, i tried to unlock the screen with my passcode but it obviously wasn't working.. i would touch the number for the passcode but the screen would respond somewhere else..so i kept getting the passcode wrong and then BAM! Ipad disabled.. so i took a break from the frustration... When i returned to my ipad i took it back apart and thats when i realized that i had the digitizer ribbon in backwards, so i fixed it and replaced the screen once again.. But now the ipad is disabled, and for some reason it will not respond when i try to shut it down all the way, no red slider at all...so i bout a apple data transfer cable and i tried to connect it to itunes and hold the buttons like i read to do in the article, and my computer recognizes that my ipad is there,,, it tells me that i have to allow access and to respond on my ipad.. but sadly i cannot.. nothing appears on the ipad.. it stays a black screen and then when i lt go the "ipad is disabled" screen comes on.....
    Then i read online that i could restore from icloud.com, so i go there, i sign in just fine but my ipad is not listed in the devices there either... it says " No Devices, You must be signed into iOS8 settings or Mac OS Yosemite system preferences to see devices."
    And i dont believe the ipad is up to date, it had been unused for about 2 months, until last week when i attempted to fix it so im sure the operating system is old :-(
    So im totally lost, I dont have a clue what to do to get my device recognized. I would really appreciate any help that anyone can give,, Thank you so much in advance!!!
    Ipad 2 wifi 16gb

    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT4623 i reset my login two days ago, now I can't remember it and my Ipad is disable and I was told to connect to iTunes

    I reset my login on my ipad two days ago, today I can't remember what I changed it too. My Ipad is disabled and I was told to connect to ITunes

    1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune (make sure you have the newest version of iTune)
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • My iPad is disabled and it says to connect to iTunes with my Mac. Its not working. How can I get my iPad to work?

    My iPad is  disabled and it says to connect to ITunes with my Mac. It still is not working.

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Ipad is disabled and forgotten pin number. What can I do??

    Ipad is disabled and forgotten pin number. What can I do??

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your iTunes content. You can restore with any other computer, but you will lose everything on the iPad.
    Instructions can be found here.
    http://support.apple.com/kb/ht1212
    You will probably need to restore using Recovery Mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • HT1212 My ipad is disabled and says it needs to be connected to itunes, when i connect it to itunes, itunes says that i need to put my passcode in my ipad for it to recognize it, but since it is disabled, i cant do this, how can i resolve this problem?

    My ipad is disabled and it says i need to connect to itunes when i connect it to itunes, it says it wont recognize it until i put my passcode into my ipad, but with my ipad disabled, this is immposible, how can i resolve this problem?

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad an resync your content to it

  • My ipad says ipad is disable and it needs to connect to iTune?

    I have this Ipad taht my cousin gave me to fix, when i turned it on is say ipad is disable and on the bottum says connect to iTune. How do I reset it with out logging in.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note: Data will be lost
    Message was edited by: Diavonex

  • Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

    Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

    If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem.  Also, since you have IOS-7, read this.  It might help.

  • Pls, help me , my ipad is disabled as a reult of constant inputing wrong security code by my child on my ipad, i was asked to connect to itunes. The ipad is disabled and cannot do anything to allow me connect to itunes. Pls, What do I do???

    Pls, help me , my ipad is disabled as a reult of constant inputing wrong security code by my child on my ipad, i was asked to connect to itunes. The ipad is disabled and cannot do anything to allow me connect to itunes. Pls, What do I do???

    This should solve your issue:
    http://support.apple.com/kb/HT1212

  • TS1363 I connect my ipad to my computer to do a sync but it is not showing up.  My ipad is disabled and I need to sync it back to the computer. I have the ipad plugged into the computer but the sync does not light up.

    My ipad is disabled and when I connect to the computer to sync it is not finding it.  I don't know what I need to do to fix it so that I can sync.  Please help

    Restore your ipad

  • My iPad is Disabled and I cannot input my passcode.  how do i do that?  I have tried to connect to iTunes and it will not connect via computer connection as I cannot activate my iPad with the pass code.  what do i do?

    My iPad is disabled and I can not input my passcode.  what do i need to do?  I tried to connect to iTunes, but it will not allow me to connect via compute USB as I cannot input my passcode for the iPad. 

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/re-sync your content to it

  • My iPad is disabled and I am unable to get it to work. How can I fix this?

    My iPad is disabled and I can't figure out out to get it fixed. The original Apple ID that was set up on the iPad is no longer active and I'm not sure if I ever changed it. Can anyone help me???

    Finding your Apple ID or resetting your password

  • I have activated the passcode lock on my iPad sometimes ago and now I forgot it, I entered several passcode but did not work, now the iPad is disabled and would not connect to iTunes. What can I do to unlock my iPad

    I have activated the passcode lock on my iPad sometimes ago and now I foregot it, I entered several passcode but non was correct, now the iPad nis disabled and would not connect to the iTunes. what can be done to unlock my iPad?

    If you've forgotten the passcode then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808

  • My iPad is disabled and it's saying connect to iTunes but iTunes' is saying that you need to enter you iPad password...

    My iPad is disabled and it's saying connect to iTunes but iTunes' is saying that you need to enter you iPad password...

    Those Links are working here...
    Try this one,
    iPad Unable to Update or Restore
    http://support.apple.com/kb/ht4097

  • My ipad is disabled and it says I must connect to itunes.  When I connect to itunes it says I need to enter a passcode on my ipad but I can't type anything on my ipad.

    My ipad is disabled and says I need to connect to itunes.  When I connect to itunes it says I need to enter a passcode on my ipad however there is no place to enter as passcode.  The screen is locked.

    You need to restore using Recovery Mode. You can read about it here.
    http://support.apple.com/kb/ht4097

Maybe you are looking for

  • I need a configuration setting

    i ve tried seting up the configuration setting of my phone but is not working ,i ve gone to nokia website,i ve dnoe it automatically and maually but nor is working and my phone secrity code is been locked by the nokia produe,the defult code is not op

  • Send me with screenshots how to debug ABAP PROGRAMS !

    i NEED HELP IN aBAP DEBUDGGING AS I AM NEW TO THIS. pLEASE HELP ME

  • Importance of changing IP Addresses

    I have yet had a reason to have my IP address changed. I do remember someone, and I don't remember what context it was in, wanting a new IP address because they got suspended from a game site and they track membership by IP address.  This guy was pre

  • PBR Using Tracked BGP Route

    Hello Guys, My scenario is: 2 Sites interconnected by 2 MPLS Links and BGP between the routers. I need some help to force some traffic to be routed using one Link based on Protocol or TCP Port. But if the link goes down, I need the traffic to be send

  • System Overview hangs

    I have one macbook running ARD 3.4 client and OS X 10.5.8 that I can "Control" and "Observe" but when I try to collect the "System Overview" it just hangs. This function works well on all other computers (about 50 of them) but not on this one. I have