Ipad is disabled connect to itunes. how do i fix this?
my ipad say its disabled and that i need to connect to itunes. but i havent connected it to itunes in the first place. when i tried it says i need to unlock it from the ipad, but i cant because i cant do anything on it. its just the background and it says ipad is disabled connect to itunes. on itunes it doesnt have the option to choose my device. how do i unlock it? i already tried to turn off the power, hold the home and power button at the same time etc. but it didnt work either.
Try placing your iPad into Recovery mode. If successful, this will require restoring your iPad with iTunes which is required. Unless you have an iCloud account and have backed up your iPad wirelessly with your iCloud account, all data on your iPad will be lost since you have never connected your iPad to iTunes for iTunes to create a backup which is done automatically as the first step during the iTunes sync process.
http://support.apple.com/kb/HT4097?viewlocale=en_US&locale=en_US
Similar Messages
-
My ipad says disabled connect to itunes how do i fix this?
my ipad says disabled connect to itunes what should i do once im connected to itunes?
You have to restore the iPad now. There is no way around it. When you connect the iPad to your computer, iTunes should launch and you can restore in the Summary Tab in iTunes.
You can read this for some more information.
http://support.apple.com/kb/ht1414
If the iPad was disabled because you forgot the Passcode, you may need recovery mode.
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
when i turn on my ipad it say ipad disabled connect to itunes and i have it plugged into my computer but i tunes does not show any device shat do i do
You can try this first and see if it helps
iOS: Device not recognized in iTunes for Windows
If the iPad still is not recognized in iTunes you can try recovery mode. I hope that you have a backup that you can restore from.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
I have forget my 4 digit passcode for my ipad 3 and exhausted all the attempts, Now the screen shows "ipad is disabled connect to itunes" How can I unlock my ipad now. Also I have not put "Find my iphone" in icloud as well. Please guide me to unlock it.
Also when I am trying to connect ipad to my windows PC, it shows, your software is up to date and later starts restoring while updating again. Then automatically it stops to update halfway and I have to repeat the process again and again, still in vain.
-
My son was trying to open my iPad and he entered the wrong password so many times. Now, the iPad is completely disabled. It says iPad is disabled connect to iTunes. I already did this several times on my laptop but nothing is happening. Is there anyone who can help please?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
so i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over wifi or when connected to itunes. how can i fix this?
You say you have iOS 7 beta. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own since you have a bootleg copy
PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog -
my iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?
Place the device in DFU mode and restore.
-
my ipad 3 is dissconnected how can i fix it if i dont have a computer
To my knowledge you can't; there are occasionally issues that arise that require plugging the devices into a computer to have iTunes resolve the problem.
Can you use a friend's computer (I recommend creating a new user account to do this just to prevent possible issues with their existing iTunes account, doesn't seem to be as much of a problem recenlty as it once was, but it's always better to avoid the possibility).
You might also find an Apple Store with someone there who is willing to help, or library/school with computers you can access for free in order to fix whatever is going on with the iPad. -
i forgot my password and i guess i typed it in to many times so now it says its disabled and i have to connect to i tunes. i tunes says it cant connect to my i pod because it has a passcode lock. so i figured out my passcode and now i cant type it in because my i pod is like pemenintly disabled ??? please help what do i do ???
Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
HT1386 my iphone & iPad no longer appear in iTunes - how can i fix this?
When I plugged my iphone 5 and ipad 3 into my laptop (windows8) they were showing fine and syncing ok but now they now longer show when i plug them in. I can see them as devices through windows explorer but not in iTunes. Can anybody assist with the reason for this?
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
My daughter locked her ipod touch and i cannot connect with itunes how do i fix this
PLease help she's 8 years old and is driving me freakin nuts. I cannot get on itunes on my computer it does think im online if there is any other way besides itunes or having to go to the apple store please i need to know
The only way is to connect the iPod to a computer with iTunes and restore. It may be necessary to place the iPod in recovery mode in order to restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
i can not figure out how to fix it, my friend said this happend to him and all he did was go buy a new one. should i do the same?
Wrong Pass Code
http://support.apple.com/kb/HT1212 -
TS2734 iphone 4s, iphone disabled connect to itunes how can i do solve this problem?
iphone 4s passcode blocked & say iphone disabled connect to itunes how can i enable this passcode unlocked ?
https://discussions.apple.com/message/18310137#18310137
Do what is suggested in this thread and restore -
Ipod says ipod is disabled. connect itunes. how do i fix this?
ipod says ipod id disabled. connect to itunes. how do i fix?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I plug in my iphone to my computer and it doesnt do anything- doesnt charge on the computer or connect to itunes. how can i fix this?
http://support.apple.com/kb/TS1538
Maybe you are looking for
-
Hi, I have used Developer Server 6 on NT4, Netscape 4.61 with JInitiator 1.1.18 and IE5. I have extracted classes.zip into orant\forms60\java. My forms work fine when I use Netscape 4.61 with JInitiator, but When I launch a form with IE5, this errors
-
Adobe Reader 9.5 - IE9 32 bit Red X on certain PDF'S?
Hello all. On a particular site I use, I can access and open some PDF's, but there are some that appear to combine an FDF and PDF "flat file" on the fly, and now when I click these links, I get a red x in my window instead of the pdf. I downgraded to
-
Good evening dear experts, i use Adobe Acrobat 9 pro extend to convert word, ppt, jepgs etc. into pdfs. No if i 1) convert a ppt into a pdf: it asks --> "save as" --> converts --> opens the file 2) convert a jpeg into a pdf: it instantly --> opens th
-
BPM Container for an abstract interface
Hello all, I have created few abstract interfaces. But when I create a BPM container of type abstract interface and click on input help, abstract interfaces are not displayed. What might be the problem ? Shankar.
-
Hi, We have declared one of the material is exciable in J1ID. I am doingthe GR for for this material with 501 movement type. When i am doing a GR in the excise tab i noticed that in the Proc mode status. I am seeing only no excise entry. But there ar