IPad is loosing Chapter Markers?

Hi,
I can make a timeline in FCPro 7 - and I name the chapter markers with a number that corresponds with, in this case, a horse hip number at a horse sale!
So I'll have a 30 minute movie edited in FCPro 7 with 10 chapter markers - all named with a number.
When I export to a SC movie - all chapter markers show up perfectly. I then run the SC movie thru Compressor - and compress for iPad. NOW, my problem begins.
When I drop the compression in iTunes and sync with my iPad (Model MB293LL) - it syncs perfectly with the iPad - and I see the Chapter Markers - but the "names" of them are lost! They're just renamed 1, 2, 3, etc and I've completely lost the number I've used to rename them???
So I "see" all the chapter markers - but their 'name' has been lost?
Interestingly, if I bring in the same movie to my iPhone - the Chapter markers show up perfectly! And hold my "name" perfectly. Is this an iPad bug?
But I could've sworn that a year or so ago, this did all work. Anyone else have this issue - that the chater marer names are lost in iPad?
Thanks,
Larry

So from that I'd say it doesn't seem to be a quirk of Compressor's or FCP's reading of the markers.
Maybe an iOS or iPad-specific thing. Unfortunately, not owning an iPad, I can't try and replicate the problem.
You might want to try a short test where you create and name the markers in Compressor and see whether the names are retained.
Perhaps the iPad discussion forum could turn up someone who has had that experience…and a solution.
Good luck.
Russ

Similar Messages

Ipad not recognizing chapter markers

Hi,
I can make a timeline in FCPro 7 - and I name the chapter markers with a number that corresponds with, in this case, a horse hip number at a horse sale!
So I'll have a 30 minute movie edited in FCPro 7 with 10 chapter markers - all named with a number.
When I export to a SC movie - all chapter markers show up perfectly. I then run the SC movie thru Compressor - and compress for iPad. NOW, my problem begins.
When I drop the compression in iTunes and sync with my iPad (Model MB293LL) - it syncs perfectly with the iPad - and I see the Chapter Markers - but the "names" of them are lost! They're just renamed 1, 2, 3, etc and I've completely lost the number I've used to rename them???
So I "see" all the chapter markers - but their 'name' has been lost?
Interestingly, if I bring in the same movie to my iPhone - the Chapter markers show up perfectly! And hold my "name" perfectly. Is this an iPad bug?
But I could've sworn that a year or so ago, this did all work. Anyone else have this issue - that the chater marer names are lost in iPad?
Thanks,
Larry

So from that I'd say it doesn't seem to be a quirk of Compressor's or FCP's reading of the markers.
Maybe an iOS or iPad-specific thing. Unfortunately, not owning an iPad, I can't try and replicate the problem.
You might want to try a short test where you create and name the markers in Compressor and see whether the names are retained.
Perhaps the iPad discussion forum could turn up someone who has had that experience…and a solution.
Good luck.
Russ

Is it possible to insert Chapter Markers via the iOS app?

So I got myself involved in a project that involves creating audiobooks and podcasts. My responsibility involves scanning thru the files, inserting the marks to create the chapters, editing for content and finally creating the .m4a and .m4b files. Very labor intensive - I'm not complaining - but this brings me to the point.
I'm able to do all this easily enough with Sound Forge and Chapter & Verse but I’m forced to sit in front of the PC for hours on end. I’d like to do the marking - the hardest part - and editing on the iPad - while commuting, at lunch, etc. The issue is GarageBand for iOS doesn’t seem to have the ability to insert “marks”. I’m hoping someone will tell me I’m wrong or point me in the direction of an app that will allow me to create chapter marks (app must have the ability to import files).

No, GarageBand on the iPad cannot add chapter markers. You can mix a song arrangement and do basic editing.
GarageBand 2 for iPad: Get answers fast
I don't know an app that can, sorry.

Chapter Markers lost in iPad transfer?

Hi,
I can make a timeline in FCPro 7 - and I name the chapter markers with a number that corresponds with, in this case, a horse hip number at a horse sale!
So I'll have a 30 minute movie edited in FCPro 7 with 10 chapter markers - all named with a number.
When I export to a SC movie - all chapter markers show up perfectly. I then run the SC movie thru Compressor - and compress for iPad. NOW, my problem begins.
When I drop the compression in iTunes and sync with my iPad (Model MB293LL) - it syncs perfectly with the iPad - and I see the Chapter Markers - but the "names" of them are lost! They're just renamed 1, 2, 3, etc and I've completely lost the number I've used to rename them???
So I "see" all the chapter markers - but their 'name' has been lost?
Interestingly, if I bring in the same movie to my iPhone - the Chapter markers show up perfectly! And hold my "name" perfectly. Is this an iPad bug?
But I could've sworn that a year or so ago, this did all work. Anyone else have this issue - that the chater marer names are lost in iPad?
Thanks,
Larry

I must be losing it. I meant to post in this thread.
My chapters are clean. Pretty good at avoiding anything problematic. I even keep spaces out of my folder names because when I learned to use computers they weren't allowed. (only 128 characters too, if I remember correctly)
I have the previous versions of Final Cut Studio. The recent decline of DVD and the economy has eaten my departments budget to upgrade the OS to Leopard and to Studio 2 so FCP 5.1.4, etc.
Maybe this has been fixed in the upgrade?
My editor has upgraded. So, this would be entirely a moot issue if Apple saw fit to make their projects backwards compatible. (Don't get me started on that) I guess I will have to stay on top of my contract editors and sending me an XML so I can work in their projects. Or giving me the M2V's I ask for already rendered.
Until we can upgrade around here.
thanks for the help tho.

Chapter markers to idvd NOT WORKING

I created chapter markers...
I sent movie to iDVD...
There is no sub-menu with the chapters.
I checked preferences and I have it all set up correctly (I assume).
Any ideas? I really need to get this done for my son's class.
Thanks.
Dwaine
According to this article: http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov3ac6b3ff.html I should be able to export to iDVD and the chapter markers should be there...
If you’ve added chapter markers to your project, you can simply burn the project to a DVD or export it, and the chapter markers will be recognized by iDVD, iTunes, iPod, iPhone, iPad, Apple TV, Front Row, QuickTime Player, DVD Player, and most standard DVD players.
Click to select the project in the Project Library, or open the project, and then do one of the tasks listed below. The Share menu appears in a light gray bar across the top of your computer screen.
To share your movie with iDVD, choose Share > iDVD, and then burn it to a DVD.
To share your movie with iTunes, choose Share > iTunes.
To send your movie to the Media Browser, choose Share > Media Browser.When you send a project to the Media Browser, it will be available for use in iDVD the next time you open iDVD, which recognizes chapter markers.
To export your movie as a movie file, choose Share > Export Movie.Keep in mind that movies exported in the tiny format don’t include chapter markers.
To export your movie using advanced QuickTime options, choose Share > “Export using QuickTime.”

This has been fixed...
Turns out I was adding COMMENTS and not CHAPTERS!
Dwaine

FCP-X Compressor 3.0.5 (need chapter-markers)

Can I send a FCP-X-project to Compressor 3.0.5?
I just need to set DVD-chapter-markers in there!
Or do you have another idea how to set individual chapter-markers??

This is more evidence that Apple really is not catering to a professional audience. Their agenda for a while has been digital-only content. They focus on getting finished products to ipods, ipads, and apple TVs.
Even consumers have complained about iDVD being ignored over the years in terms of feature set. I bet the next iLife will be the one to not include it.

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

I am trying to enter a split point for a file going on a dual layer disc. There are chapter markers in the file but the automtic function doesn't see them. Can I insert a point for the layer split in DVD Studio Pro 3 or 4? It doesn't appear that the autom

I am trying to enter a split point for a file going on a dual layer disc. There are chapter markers in the file but auto function does not see them. Went back and put a small split in the timeline in fcp and exported to mpeg 2 again and auto function does not see that either? Manual msays to manualy enter split poind in DVDSP but can't find any way to enter that split point in DVDSP? How can I manualy enter a split point in DVDSP 3 or 4?
Elizabeth/Roger Cook Films

This is definitely not the behavior I see. When I left click it adds a marker,
When I right click, I see the following
Do you have any OS hacks installed on your computer or have you changed the mouse behavior in system preferences: mouse? If not, I'd suggest you run digital rebellions preference manager and reset your dvdsp preferences.
https://discussions.apple.com/docs/DOC-2491

How do I export from Compressor 4 to iDVD with chapter markers?

I get that Final Cut Pro X does not create chapter markers.
I send it to Compressor 4 to do this.
Ok, so far, so good.
How do I export this so that I can then author the DVD to include a menu page, etc?
Do I do this in iDVD? If so, what format, as I see that iDVD does not import MPEG-2.

Don't use the DVD preset in Compressor. Use an MPEG4 format or maybe even AppleTV preset.
This Apple Support Article might help a little.

Chapter Markers won't show up on Chapter Menu when trying to burn a DVD.

Help,
Trying to burn an SD DVD disc in FCP X from the Share menu. I've set Orange Chapter Markers with Titles in my project from the timeline and these don't appear when I check the box to use chapter markers for Subtitles in the Destinations box to burn a DVD. I've set a photo in the main menu and it appears with the Title of my Project, but in the Chapter Menu it only shows the default list of Chapter 1, Chapter 2, etc. Shouldn't my Chapters show up on the list after they've been set up on my timeline in the project? Also, I tried burning a disc with my Chapters not showing up on the chapter list and my disc only plays from the Main menu where the picture is inserted. There's a slash line in the Chapter list button stating I can't use that option and I can't play chapters. Trying to get this project out the door before January 20, 2013. Can someone please help?
Thanks,
Dave

Can you post some screen shots? The chapter marker dialog box in the timeline. The DVD menu.
What's playing back the DVD?
Have you tried it without the background image? Build a disk image rather than burn a disc.

How to add chapter markers for each file in a folder?

Hello,
I have several image folders with up to 700 images per. I would like to drag & drop them into the timeline but I want to be able to use the chapter/arrow button on the DVD player remote to scroll through them.....like a videoscrapbook, per se.
Is there a setting that will allow me to drop them into the time line and automatically generate a chapter marker for each image, that will be read on export to DVDSP? Surely, there is something like this built in that I just have not yet found; I cannot believe the only alternative is to manually add 700 chapter markers per folder. And do they always go into the timeline in alphabetical order? Can that be prevented or altered?
Also, doesn't it seem strange there is no single-button option (I'm presuming here, since I have not found one) for adding a chapter marker; the '~' button adds a generic marker but you must 'edit' it and click 'chapter marker' - very time-consuming --- or am I missing something here, too? If so please enlighten me! I've experimented a lot but no luck.
Many thanks!
jf

I thought there was a folder size limitation on DVDSP - these folders have digital family photos on them and they are jam-packed; 600, 700, whatever. And there are several of them. I guess I thought putting them in FCP was the only way to avoid the limitation - if there is one.
I'll try putting them straight into DVDSP and see what happens. Thanks!
jf

How do I get chapter markers defined in a compound clip to show up in the DVD menu?

I have created a timeline to burn a DVD/Blu-Ray. The timeline contains 3 compound clips. Each compound clip contains roughly 25 chapter markers.
When I open the Share > DVD dialog, it shows the Chapter button in the preview, but the DVD itself doesn't have the chapter markers.
Expected Result: When I define Chapter markers in a compound clip, they should show up on a DVD burned from a timeline that used the compound clip.
Actual Result: The DVD does not contain the chapters button, nor do the chapter skip buttons do anything. It's as if the chapters were never defined.
Workaround: Redefine all the chapter markers in the new timeline over the compound clips - Annoying!
Is there a simple way to get FCPX to recognize the chapter markers defined in the compound clip when I burn the project? It would save me quite a bit of time!!
Thanks, all, for your help!

Thanks for the tip. I was looking for this feature, but it was not included in the context menu. It can be found in the "Clip" menu.
I think the best workflow for me would be this:
Edit in a master timeline
Select the entire master time line, send to compound clip.
Create a new project, add the compount clip
Add the chapter markers to the new project
Select everything in the new project, create a second compound clip.This makes the chapter markers portable.
Open up the "burn" project, insert the second compount clip.
Select the newly inserted compound clip, and select "Break Apart Clip" from the "Clip" menuThe result is a managable compound clip with chapter markers.
Thanks for taking the time to answer my question!
db

How can I create chapter markers that iTunes will recognize?

I recently purchased several audiobooks from Barnes and Noble which are encoded as MP3s with chapter markers inserted into the metadata in a proprietary format. I am trying to convert them to appear properly in iTunes.
It appears that I could import them into a GarageBand podcast project, and create markers by hand there, but that is very slow and impractical for dozens of hours of audiobooks.
I would like to simply edit the metadata associated with the file so that iTunes will recognize them.
Here is an example MP3 audiobook file with proprietary chapter metadata:
=============================================================
Input #0, mp3, from 'A Game of Thrones-Part01.mp3':
Metadata:
title : A Game of Thrones - Part 01
copyright : Books on Tape
album : A Game of Thrones
genre : Science Fiction & Fantasy
publisher : Books On Tape
TIT3 : null
track : 1
encoded_by : OverDrive, Inc.
OverDrive MediaMarkers: <Markers><Marker><Name>Prologue</Name><Time>00:00.000</Time></Marker><Marker><N ame> Prologue (03:18)</Name><Time>03:18.893</Time></Marker><Marker><Name> Prologue (08:09)</Name><Time>08:09.467</Time></Marker><Marker><Name> Prologue (13:41)</Name><Time>13:41.200</Time></Marker><Marker><Name> Prologue (18:11)</Name><Time>18:11.133</Time></Marker><Marker><Name> Prologue (22:41)</Name><Time>22:41.440</Time></Marker><Marker><Nam
artist : George R.R. Martin/Roy Dotrice
Duration: 01:13:03.89, start: 0.000000, bitrate: 64 kb/s
Stream #0.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s
=============================================================
Obviously iTunes won't recognize this format. For comparison, here is an audiobook purchased from iTunes:
=============================================================
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '01 Water for Elephants (Unabridged), Part 1.m4b':
Metadata:
major_brand : M4B
minor_version : 0
compatible_brands: M4B mp42isom
creation_time : 2009-05-09 12:36:04
title : Water for Elephants (Unabridged), Part 1
artist : Sara Gruen
album : Water for Elephants (Unabridged)
genre : Fiction
track : 1
copyright : ℗ 2006 HighBridge Audio
Duration: 05:38:07.04, start: 0.000000, bitrate: 64 kb/s
Chapter #0.0: start 0.000000, end 655.000000
Metadata:
title : Water for Elephants (Unabridged)- Track 1
Chapter #0.1: start 655.000000, end 2056.000000
Metadata:
title : Water for Elephants (Unabridged)- Track 2
Chapter #0.2: start 2056.000000, end 4038.000000
Metadata:
title : Water for Elephants (Unabridged)- Track 3
Chapter #0.12: start 18249.000000, end 20287.041995
Metadata:
title : Water for Elephants (Unabridged)- Track 13
Stream #0.0(eng): Audio: aac, 22050 Hz, stereo, s16, 62 kb/s
Metadata:
creation_time : 2009-05-09 12:36:04
Stream #0.1(eng): Subtitle: text / 0x74786574
Metadata:
creation_time : 2009-05-09 12:36:04
=============================================================
When I transcode my mp3 audiobook, manually changing the metadata, I end up with this:
=============================================================
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'A Game of Thrones-Part01.m4b':
Metadata:
major_brand : M4A
minor_version : 512
compatible_brands: isomiso2
creation_time : 1970-01-01 00:00:00
title : A Game of Thrones - Part 01
artist : George R.R. Martin/Roy Dotrice
album : A Game of Thrones
encoder : Lavf52.107.0
genre : Science Fiction & Fantasy
copyright : Books on Tape
track : 1
Duration: 01:12:55.94, start: 0.000000, bitrate: 64 kb/s
Chapter #0.0: start 0.000000, end 198.893000
Metadata:
title : Prologue 1
Chapter #0.1: start 198.893000, end 489.467000
Metadata:
title : Prologue 2
Chapter #0.2: start 489.467000, end 821.200000
Metadata:
title : Prologue 3
Chapter #0.3: start 821.200000, end 1091.133000
Metadata:
title : Prologue 4
Chapter #0.4: start 1091.133000, end 1361.440000
Metadata:
title : Prologue 5
Stream #0.0(und): Audio: aac, 22050 Hz, stereo, s16, 63 kb/s
Metadata:
creation_time : 1970-01-01 00:00:00
Stream #0.1(eng): Subtitle: text / 0x74786574
Metadata:
creation_time : 1970-01-01 00:00:00
=============================================================
The resulting file appears to have chapter markers in the same format as the iTunes audiobook format, however the chapter markers don't show up in iTunes, QuickTime Player or on my iPhone. VLC however does recognize the chapter markers.
Can anybody point me in the right direction? I seem to be at a bit of an impasse here.
Edit: I am using iTunes 10.1.2 if that makes any difference.
Message was edited by: ttrutna

Hi,
WS20000077 this std. Workflow for the PR Release this has different levels of approvals, Depends on the no. of approvals it will flow.
The approver can picked using the User Exit M06B0001 (EXIT_SAPLEBNF_001), here you have to write a logic to pick the Approver.
The approval workitem comes to SAP Inbox, once the approver click the workitem it will open the Transaction, there the user can approve.
And for BUS2009 issue , discuss with Functional Consultant check configuration done separately for Purchase requisition item.
Regards,
Surjith

For what reasons would you not be able to add chapter markers to a project?

New to this...I will try to give you the detail you need to answer without giving you a long story. I am actually asking this question because I have a video production company working on my wedding video..they are using iDVD to burn but I am not sure if they are using iMovie to compose or some other software. Anyways, this is actually the second time around with my video. They produced it 18 months ago and it looked beautiful! The only problem was that we realized 10 months later that there was an audio problem with the wedding ceremony. In the meantime, the person who originally worked on the project left with the software and the equipment. So, they had to start over and have been working on the redo since February and I think I am the iDVD "test rat". They are telling me now that it is not possible to add chapter markers to the project in iDVD. And this is part of the e-mail they sent me with a supposed explanation:
+I took your corrected DVD to the Apple Store and the training expert explained to me that this program only shows each chapter at a time and the program will automatically go back to the menu after each chapter+.
From what I have been reading on the discussion boards, the only reason that adding chapter markers would not be possible is that they are using iDVD '08 (since they purchased the software in February, I don't think this is possible) or that they did not use the original wedding tape to create the new DVD project..they used the already broken down video segments from the 1st DVD and just put them in menu folders??? Any help or explanation would be GREATLY appreciated! If there is any additional information you might need, I will do my best to provide it.
THANKS!!!

Hi cooperjb,
Welcome to apple discussions. iDvd is consumer authoring software. DVDSP on the other hand is part of FCS 2 / apple's top of the line / professional DVD authoring software. There are some significant (huge) differences between the two apps which I won't go into great details here since I could likely fill a text book on this very subject. Instead you can search this forum/s for a few prior posts as well as apple's knowledge base (KB) for further details on exactly why pros prefer to use Apple's FCS 2 as opposed to the i-Apps.
As much as one may want iDvd to act and perform exactly like Professional Software, It is not. It's intended for consumers (and prosumers).
On a less serious note, this one's always good for a laugh:
http://www.youtube.com/watch?v=4-94JhLEiN0&feature=fvw#watch-main-area
Message was edited by: SDMacuser

Compressor - export to Blu-ray with more than 6 chapter Markers?

Hi,
I'm interested in creating Blu-Ray discs. I've played around taking a self contained 30 minute movie I created with FCPro 7 - it has several chapter markers put in while editing in FCPro.
I took the SC movie and brought it into Compressor and burned directly to a DVD with the Chapter markers. It worked perfectly.
2 questions, if anyone has done this . . . if I buy a Blu-Ray burner and firewire it into my MacBook Pro - can I burn the Blu-Ray exactly like I did the conventional DVD? Except now it'll be High Definition? I'm guessing in COmpressor, when I 'selected' the internal DVD burner - I guess I'll see the new external Blu-Ray one after I firewire it into the MacBook Pro?
My question is, will it then burn to the Blu-Ray exactly like it did to the internal conventional DVD burner, except be in HD now?
I just don't want to buy a Blu-Ray burner and have something nt work? Thanks, if anyone can confirm this.
I also have Roxio Toast Titanium 11. But keeping it all in Compressor seems easier - with limited screens.
Oh, I only get 6 chapter markers on a screen thru Compressor. Any tricks as to how I can get more than 6? I have like 30, and I'd rather not go thru 5 screens getting to the end!
Thanks very much if anyone has any experience in this area.
Larry

Thank you, Shawn. You're confirming everything I thought!
Just asking . . . perhaps you have a few thoughts here:
- Is Compressor version 4 any "different" than 3.5 - as far as just dropping in a QT movie master to compress?
- I guess there's no way to get more than 6 Chapter Markers in Compressor DVD? I don't see a way, perhaps there is? Or . . . I have to learn toast! But I can do that! Just easier if Compressor would do it all!
Thanks again

IPad is loosing Chapter Markers?

Similar Messages

Maybe you are looking for