IPad is now useless after trying to install iOS 6.1.3

Tried to update this today and now telling me I need to restore, so have lost all my photos and progress on apps etc. any ideas on how to get my old iPad back!!

See Here > http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Similar Messages

Ipad will not turn on after trying to install ios 6.1

after trying to install ios 6.1 my ipad seems dead, the apple comes on and off, and the battery shows no life, after it has been plugged in for hours.

See Here > http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
Please help!

That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
iTunes: Restoring iOS software

How do i get my iphone 5 out of recovery mode after trying to install ios 7

Alright, so i tried to install ios 7 and i got an error saying that the ios 7 update got a problem and so then my phone went into recovery mode. i installed tiny umbrella to get it out of recovery and it worked, so then i tried to install ios 7 again and it got another error this time my phone had already been switched to the ios 7 format but was not completely done, so my phone went into recovery mode again. so i tried tiny umbrella again and it just kept going back to recovery mode. i tried to restore my phone after trying to look for another way to get my phone out of recovery mode and i got nothing so i decided to restore my phone and i then get another freaking error saying that itunes could not restore due to a problem, then i just decided to try tiny umbrella one last time and it didnt work. so i tried to restore again but now my phone is not being detected on itunes so i cant do anything, and my phone is stuck in recovery mode... all i was trying to do is get the new update and now my phone is dead, it wont do anything please help!!

Use tinyumbrella. Connect your iphone, click on the random string of numbers that appears in the recover devices window, and click "exit recovery". That solved my problem, and it may solve yours. Give it a shot.

Having a problem with my ipad... I tried to install ios and the ipad has frozen

I am having a problem with my Ipad air. tried to install ios and my ipad has frozen

Click here and follow the instructions.
(124611)

My iphone (4) is stuck in recovery mode after trying to install ios 5

I successfully exited recovery yesterday using recboot, but then after retrying to install ios5 it failed again - this time with error 14, and its back in recovery mode and I can't get it to exit with recboot this time. When I plug it in to my PC, itunes wants me to do a restore - i click the restore button and it takes anywhere between 15 minutes and 3 hours depending on the time! Then completes and does nothing to the phone - no error. I've tried this again and again but no luck. My service provider tells me its a problem with the handset and I need to get it checked, but they haven't been reading the apple forums so I'm not convinced! Any help would be greatfully recieved! Heth

Get your money back from the seller, and if you are not immediately successful file a complaint with eBay.
Not all jailbroken iPhones can be fixed. That's probably why it was on eBay.

My iPad 2 crashed after trying to install ios 8.1.2 update. It cannot restore nor update.

iPad 2 will not respond to iTunes recovery nor update now.

Try these instructions. Follow them exactly.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

5s won't start after trying to install iOS 8.2

For maybe a half hour it's been cycling between 3 screens: black apple on white, blue, then black.
Tried connecting to my macbook, but itunes and iphoto didn't autolaunch as usual.
What can i do?

Problem kind of solved. I was able to turn off the phone by waiting until the blue screen came on. Then followed the instructions to go into Recovery mode and Restore (Update didn't work). As the warnings indicate, everything past the last backup was deleted On the bright side (I guess) the new update (8.2) is now installed.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

I have downloaded infinity blade 3 and then deleted it because i wanted to install some other apps. but now i am trying to install the game again but its saying error 0xE8000004. I have about 6.5 GB space on my iPad. what should i do..

I have downloaded infinity blade 3 and then deleted it because i wanted to install some other apps. but now i am trying to install the game again but its saying error 0xE8000004. I have about 6.5 GB space on my iPad. what should i do..

These might help
http://support.apple.com/kb/TS3221
http://support.apple.com/kb/TS3694

Ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?

ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

I tried to install IOS 5.0. It crashed and now my Ipad is dead !

I tried to install IOS 5.0. It crashed and now my Ipad only shows an Apple icon being busy. iTunes could not connect to it due to unknown device(OxE8000065) and it has been like this for a long time now ...
Do I leave it as is, or kill it off, and if the latter, how do I do it?

Unable to Update or Restore
http://support.apple.com/kb/ht4097

After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work

While trying to install my (less than 2 year old) HP6500 Wireless all-in-one software on my 3rd networked computer, the software installation went into a loop and would not complete the installation. After about an hour or so of waiting, I physically had to unplug the printer & eject the CD. Upon doing so, the printer became next to useless. The printer key pad no longer functions except when I first plug it in, and I can no longer access it from the other 2 original computers, even with USB. The HP solution center says it’s on line, until I go to print via USB, then it says it’s offline. I can hook the USB up on the Widows 7 unit and force it to print Word Office documents, but when I try to print documents on it from either Internet Explorer or Fire Fox it wants to send a Fax??? I've uninstalled and reinstalled the software 3 times on my Windows 7 unit now to no avail. Is it my printer, the printer Firmware or what? I have downloaded and run all the HP & Microsoft troubleshooting tools on the Windows 7 unit to no avail. However; HP downloads will not successfully complete on my XP unit. What should I do? Should I start over with a new wireless printer?
Totally Confuzed

Re: After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work
Ref: 02-23-2012 08:53 AM
12:38 AM 2/24/2012 UPDATE ON WHAT I HAVE TRIED AGAIN:
1. Power Reset on the Printer: Power off the printer. Unplug the power cable from the back of the unit. Wait 60 seconds. Replug the power cable to the printer and power it on. DONE
2. Print a test page: Follow this document to print the test page. PRINTER SCREEN SAYS IT'S PRINTING AND THE POWER LIGHT IS FLASHING LIKE IT'S BUSY, BUT NOTHING IS HAPPENING. ONLY WAY TO USE IT NOW IS TO UNPLUG IT AND START OVER. THIS HAPPENS ALL THE TIME NOW. IT WILL NOT PRINT TEST REPORTS.
3. Create a copy of the printed test page. CANNOT DO NOW - (PRINTER FREEZES UP WITH A BLINKING POWER LIGHT)
4. Print the Wireless Network Test Report (To check if there are any errors) CANNOT DO
Press the Setup button ( ). DOESN'T WORK EXCEPT MOMENTARILY...NOT LONG ENOUGH TO MAKE A SELECTION BEFORE IT HANGS AND FREEZES UP...
Press the Right Arrow button ( ) to select Network Setup, and then press the OK button. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
Press the Right Arrow button ( ) to select Wireless Network Test , and then press the OK button. The Wireless Network Test Report prints. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
If you did not encounter any errors while performing the steps above then I think the hardware is OK. Test the software next. Let's use Windows 7 as the test platform. I DON'T THINK THE HARDWARE IS OK.
1. Download the driver from HP.com. Once it gives you the option to either Run or Save make sure to select Save and then select Desktop as the target location where it will save the file. This is just to make it easier to find it. Once it finishes downloading the file, double click it to initiate the installation process. Follow the on screen instructions until you reach the "select how you want to connect the printer" window comes up. I ALREADY HAVE 3 COPIES ON MY DESKTOP & NONE OF THEM REACT ANY DIFFERENTLY.
2. At the "select how you want to connect the printer" window select USB and then click Next (I think there is a next button). It should asks you to connect your printer but we are NOT going to do that. Place a checkmark on the option on the bottom of the window that gives you the option to bypass the connection phase of the installation. Click Next to proceed. Once the the installation process completes, restart your computer. I HAVE DONE IT BOTH WAYS BEFORE AND CANNOT GET THE INSTALLATION TO COMPLETE ON ANY OF THE 3 COMPUTERS NOW.
If you did not encounter any errors at this point then it looks like the software installation process is good. Proceed to the next test. END OF TEST FOR TONIGHT. THANKS
1. After the computer completely boots up, connect the USB cable to the printer and to the computer. The computer should detect the printer and initiate the HP installation process for it. Follow the onscreen instructions to complete the install.
2. Try printing to test functionality.

I tried to install iOS 7 and now my phone won't turn on?

Well, around 3 hours ago I tried to install iOS 7. It said I didn't have enough space so I deleted mostly all of my apps, all my music, all my photos and all my videos. It then said I had enough space so I went to install it. It kept saying error over and over again so I tried restarting my phone (which is an iPhone 4) and then it went all wrong. It just stayed on the Apple logo and never went off it. I asked around and I was told to do a hard reboot (I hold down the off and home button for 10 seconds, then lift my finger off the off button until the logo comes on again and links with my iTunes). I did this and it linked with my iTunes but it won't download iOS 7 from it (it says it has "40 hours remaining" or something ridiculous but doesn't budge - it wants to download iOS7 from iTunes when I am trying to recover my iPhone) because after waiting for a while, an error pops up. It's just a vicious cycle with nothing at all changing and it's really annoying me now. Can anyone help? It's getting late and I *REALLY* need this phone for tomorrow.
Please help me.

The phone is in recovery mode. See this support document for instructions on what to do. http://support.apple.com/kb/HT1808

I'm trying to install iOS 5.0 but getting message that my computer does not have sufficient space to backup my iPad; continuing will result in loss of all media on iPad. I was going to install iCloud but it seems that you have to have iOS 5.0, help?

i'm trying to install iOS 5.0 but getting message that my computer does not have enough space to backup my iPad and continuing will result in loss of all media on iPad. an option seemed to be backing up on iCloud, but i think you have to have iOS 5.0 to install iCloud.
how do i install iOS 5.0 without losing anything on my iPad?

If you really do not have enough space on your HDD for a backup of your iPad, you do not have enough space at all. Free up at least 15% of your HDD, in any case more than 0.8GB for the iPad update.
Make backups on an external disk.
After freeing up enough space, try again.

Ipod won't work after trying to install Paid 2.0 update

I bought the 2.0 update for my 16 gig ipod touch. After trying to install the update through itunes half way through the update it gave me the message "The ipod could not be restored. An Unknown error occured (6)." I tried to do a restore on the ipod it it does the same thing. Can anyone help? Now after paying for an update I have an ipod that doesn't work at all.
I tried doing a restore using the old software on a different itunes library and get the same error message.
Any suggestions?
Thanks Larry

lukemichael wrote:
ok i have figured out how to fix this problem!! it is simple. make a new account on your computer. Now use the itunes on that account and just plug ur touch in and restore it. It will restore it to the software 1.1.4 . now just go back to your main account on ur computer and plug ur touch in once again and it will restore it to its original settings and sync all your songs and videos and the rest.
I followed the above instructions. Let Itunes 7.7 set itself up on the new account and downloaded the update. The first attempt didnt work but the second attempt after I rebooted the PC I logged in on the new user and booted up Itunes.
When that had finished faffing about I connected the USB cable into another USB port (above the one its just come out of if you get my drift) and it started extracting the software for Restore then it started prparing the ipod for for restore and then started uploading the software to the ipod in which it had not done it before. As I type it has just finished synching the ipod with my current Itunes library on my default windows account.
I am running the update but will have to enter my contacts details again but hey thats no big deal.
So I hope you all get yours to work.
Cheers
Hentis

IPad is now useless after trying to install iOS 6.1.3

Similar Messages

Maybe you are looking for