IPad isn't recognized by iTunes or Explorer

I recently updated my iTunes to 10.5, and before this, all of my devices synced up fine. However, after this update, neither my iPod Touch nor my iPad are even recognized by iTunes OR Explorer. They show up as "Unspecified" in my Devices though. I've already tried all the fixes recommended on the Apple site, but nothing works so far. I'm pretty sure I'm not the only one who has the problem, so, has anyone discovered a good fix yet?

Might be the drivers. I know my computer reinstalled both device drivers when i upgraded my touch and ipad to os5. If you haven't done so already, try going into your windows programs menu in the control panel and uninstalling everything apple. Then reinstall itunes 10.5 and plug your devices in and see if the drivers reinstall. It took me 3 hours to upgrade both my touch and ipad, downloading the update, backing up, installilng it and then having the drivers reinstall.

Similar Messages

  • Ipod, Ipad and Ipad mini isn't recognized in itunes

    My two Ipods, ipad, and my ipad mini isn't recognized in itunes anymore....please help.

    iOS: Device not recognized in iTunes for Mac OS X

  • My iPad isn't recognizing my airport base.  My laptop is connected.  I've tried a hard power down of the iPad and my iTunes software is up to date.

    My iPad isn't recognizing my airport base.  My laptop is connected.  I've tried a hard power down of the iPad and my iTunes software is up to date.

    If all of the network information is entered correctly in the iPad, some users are finding they have to power down the wireless and then power back up for their iPad to connect.

  • IPad 2 not recognized on iTunes

    This evening I had problems starting apps as the memory was full.  I plugged the iPad into the PC and started iTunes.  All looked good and 'normal' so I started to delete some of the kids game apps.
    A message then came up to update the iPad iOS software.  When I selected that it said the iTunes software needed updating so I selected that too.  After about ten minutes of file downloads it then showed error 3004.  I followed all instructions given by Apple.  One helpful Apple message sends to the iPad but the iPad is now stuck on the black screen with the blue iTunes connect logo.
    iTunes doesn't see the device, even when asking for a reboot.  I tried a system reset to yesterday but that failed too.
    Any one know a way of getting the iPad to get off the blue iTunes connect screen without smashing the thing?

    Hi there Matthew,
    It sounds like your iPad is in recovery mode and it isn’t recognized by iTunes, also this all started after attempting to update iTunes on your PC and iOS on the iPad. Take a look at the article linked below and try the troubleshooting suggestions that it provides before attempting to restore the iPad.
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    So long,
    -Jason

  • My iPhone isn't recognized by iTunes.

    My iPhone isn't recognized by iTunes so I can't synchronize anything.
    Same thing with my iPad. I tried re installing a couple times already but nothing changed.
    Does somebody know what else to do?

    http://support.apple.com/kb/ts1591

  • IPhone and iPad not being recognized by iTunes

    Hi All,
    I had a late 2007 macbook pro that developed a line across the screen where everything below it was gray. At first it was a simple 'wiggle of the screen' fix, then it evolved into a 'put a bag clip on the side', then it became a 'put a bag clip on the side and wiggle it to find the perfect spot'. My friend (who has the exact same model bought 3 days apart at the same location) upgraded to a macbook air and gave his old computer to me so I'd have a working screen again. He had updated the computer to lion before giving it to me (I had snow leopard). I had the HD's swapped as well as my ram (as I had 4 vs 2gbs). Now the computer is having some serious issues. When I plug in my iphone or ipad it isn't recognized in iTunes, I did notice its recognized in iPhoto but won't actually bring up any of the pictures... just shows that they exist (but are blank). Google Chrome crashes now everytime I use a command to open a tab or close a window etc. I've also noticed that programs are taking 15-30 seconds to open and I'm getting a lot of spinning wheels. Everything is updated and I've tried re-installing snow leopard and the programs that are being affected. And that's all I've noticed so far, but its only been 24 very frustrating hours.
    I'd go to apple but all the products are out of service so there won't be any help there. My friend had none of these problems before giving me the computer and took meticulous care of it. Anyone have any ideas what is going on?? I'm having a hard time trying to understand how swapping a HD could possibly cause all these problems.
    Thanks a bunch,
    Evan

    Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

  • IPad mini not recognized by itunes 10.6.1 (7)?

    Why is new ipad mini not recognized by iTunes 10.6.1 (7)?  Running OSX 10.5.8 software on the Mac.  Software updates both report: "up to date"

    Sorry, but you need iTunes 11 which requires OS 10.6 or higher and a Mac with an Intel processor. In other words, you need a newer Mac.
    http://www.apple.com/ipad-mini/specs/
     Cheers, Tom

  • I restored my macbook and now my ipod isn't recognized by itunes

    I restored my macbook and now my ipod classic isn't recognized by Itunes... Help

    Have you worked through each and every single suggestion in this Apple support document yet?  If not it would be a good place to start.
    iPod not recognized in iTunes and Mac desktop
    B-rock

  • HT1353 2nd gen iPod isn't recognized by iTunes nor Windows - What to do?

    I have an iPod A 1019 (2nd gen?). When I connect it to the firewire connector on my PC, the unit screen shows a checkmark and "OK to disconnect." I tried to reset with Menu + Select (=nothing happened) but Menu + Play works. Still, PC + iTunes won't recognize iPod. Help? I suspect that the software on the iPod itself is too old but since the device cannot be discovered, I can't update it. I tried iPod transfer software, but nothing recognizes my oldie. Sigh.

    Hi, Griff W.!
    Thanks for taking the time to offer me the troubleshooting steps. I tried them all, but unfortunately to no avail. I can listen to the iPod, but once I connect it to my PC with the firewire cable, it still isn't recognized in iTunes or in Windows. I checked the Universal Serial Bus controllers. The iPod is nowhere to be seen. I checked the version of the software on the iPod and it's 1.5. Maybe that's the problem: the software is too old?
    BTW, the firewire cable is charging the iPod.
    Maybe if I could find someone with an old PC that has a firewire port?  But even if I were to make the iPod visible, would I be able to copy the songs onto my new iPod? From what I've been reading probably not. It's really exasperating. They music is legit, copied from my CDs or purchased.
    I am looking at my new superslim iPod Touch 5th generation and right next to it the clickwheel iPod 2nd generation that's more than a cigarette pack sized. Progress. I guess.
    Thanks for helping out. If you have any more ideas, please let me know.
    Best regards,
    D.

  • My 1st gen iPad is not recognized in iTunes, help!  I have uninstalled, reinstalled, stoped and started the mobile....nothing is working.

    I have done everything I can find online to solve my problem, but I still have the same problem.  My 1st gen iPad is not recognized in iTunes!  Cannot sync!  Please, any suggestions from anyone?  Anyone else having the same problem?

    Hello casinojen,
    I would be concerned as well if my iPad was not recognized by iTunes.  Thank you for providing all the information with the steps you took in regards to this issue.  I found an article with a few more steps you can take (you can skip the steps you have already taken):
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My ipod touch isn't recognized in itunes, what can I do?

    my ipod touch isn't recognized in itunes, what can I do?

    iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

  • I have an ipod touch first generation and it is telling me to connect to itunes but it isn't recognized by itunes when i try to connect it. what do i do?

    I have an ipod touch first generation and it is telling me to connect to itunes but it isn't recognized by itunes when i try to connect it. what do i do?

    Try disabling your security software and turning off the Firewall on your PC.
    Disable antivirus software
    Turn Windows Firewall on or off
    iOS: Device not recognized in iTunes for Windows  <--- definitely try the instructions for resetting the AMDS.

  • IPod asks to be restored in iTunes, but isn't recognized in iTunes...

    My iPod classic 160GB isn't recognized by iTunes anymore. I started it in disk mode and reset it, but now the message appears that I need to restore my iPod in iTunes. But iTunes doesn't recognize it when I connect it to my laptop and on the display "do not disconnect" appears. Now what do I do? I'm quite desperate and hope someone can help.
    Thanks in advance...

    I have noticed that this happened to user Colin Craig and nobody managed to answer him, is there anyone that can help??
    for more detail, i only changed the name as it appeared in itunes in capital letters then when i looked in my pod it was empty! HELP MEEEEEEEEEEE!!

  • HT1937 My iphone 4S isn't recognized by itunes when i connect it via usb...it won't sync.   Help?

    My Iphone 4S isn't recognized by itunes when i connect it via usb...it won't sync.

    iOS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

  • Iphone 5 isn't recognized by itunes or any other program

    iphone 5 isn't recognized by itunes or any other program after trying to restore it from itunes and got a error. now is stuck in itunes screen. any help please?

    iPaul91 wrote:
    after trying to restore it from itunes and got a error.
    The exact wording of Error messages and Alerts are imperative in ascertaining your issue.
    iPaul91 wrote:
    .... now is stuck in itunes screen.
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

Maybe you are looking for

  • IMovie 11 only imports one file at a time

    Recently, aside from the legendary stability issues (decent today, thank you very much) - I am working on a lenghty project with dozens of clips, but in the Import Movies dialog, no matter how many files I select, I only get ONE file. I have to go ba

  • Customer is insisting that I intercept MIGO when a goods rcpt is posted

    When a goods receipt posting is saved in transaction MIGO, I need to intercept the save and pop a screen that will allow the user to enter values for some columns that we've added to MSEG in an append structure. I've tried to convince them to let me

  • Trouble with 3230 phone

    I purchased a new 3230 set on 26.06.07 from M/S Sonam Systems and Appliances, Bongaigaon, Assam. I am facing various problems like hanging, automatically getting switch off etc with the set from within 2 / 3 days of purchase. At the time of trying to

  • How to use a transferfunction as a sub VI

    Hello,          Iam trying to make a pid controller.I succeed when I used a transferfunstion H(S) as the parameter to control.It is attached with the name controlsystemdesign.vi.But my aim is to use my own transfer function pidcontroltransfun.vi inst

  • InDesign and Hungarian Text

    I am currently using InDesign CS2 Windows and I have been able to work with a wide range of characters/languages with no problems; from Romanian to Icelandic once I installed the appropriate font not characters were ever missing. Until I tried to pou