IPad issue with appointments in exchange

I have an iPad2 connecting to Exchange 2012. I tentatively accepted a meeting from my iPad.  It kept sending the tentative acceptance many times per minute until I went to my desktop and sent it as tentitive. I guess my question is, has anyone else seen this issue? And if so, how did you fix it?
Thanks!

App store frequently asked questions
http://support.apple.com/kb/HT2001
Cannot connect to iTunes Store
http://support.apple.com/kb/TS1368

Similar Messages

  • Issue with indirect Quotation Exchange rates...

    Hi All,
    I am using FM 'POSTING_INTERFACE_CLEARING'  to clear the customer open items.
    While  posting with indirect quotation exchange rates i.e BKPF-KURSF is in negative.It is throwing below error
    "The Exchange rate may not be transferred if negative".
    When i check it in BKPF table the value is saved like exp: '/1.9010'.  for select query it is picking like '1.9010-'
    How to resolve this issue.? it is very urgent.
    Thanks in Adv.
    Regards,
    Raj.

    Hi,
    I gave the OB08 entries, not sure if you wanted me to explain the logic. Here it is..
    Maintain 'Indirect quotation' from Local currency(USD) to Transaction currency(CAD) and 'Direct quotation' from Transaction currency(CAD) to Local currency(USD).
    Direct quotation is where the cost of one unit of foreign currency is given in units of local currency, whereas indirect quotation is where the cost of one unit of local currency is given in units of foreign currency.
    Your local currency is USD:
    - Direct exchange rate: 1CAD = 0.92819 USD
    - Indirect exchange rate: 1USD = 1.08238 CAD
    The following settings have been made in the standard system:
      - Direct quotation: ' '
    -   Indirect quotation: ' / '
    Direct exchange rates do not have a prefix.
    Your local currency is USD. You enter a business transaction in the transaction currency CAD. Until now, you had to use direct quotation to enter the exchange rate (1CAD =0.92819 USD). If you have defined '/' as the prefix for indirect quotation, you can also enter the exchange rate with indirect quotation (1 USD = 1.08238 CAD) by entering '/1.08238' in the exchange rate field.
    Direct or indirect quotation can be maintained as the standard form of quotation for a certain currency pair. You use:
             - '1' for direct quotation
             - '2' for indirect quotation
    If a standard form of quotation has not been specified for a currency pair, the system automatically uses direct quotation.
    You make the settings in the IMG: General Settings -- Currencies -- Set Standard for Direct/Indirect Quotation per Currency Pair.
    Thanks
    Ganesh

  • Issues with setting up Exchange Server 2013

    Hi All
     Not sure what im doing wrong yet i am having issues with exchange server 2013.
    Currently I have got general SMTP Mail flow working. as long as i log onto the local servers OWA (https://10.x.x.x/owa) i can log into a users mailbox. i have tested sending and recieving mail using this and it works.
    My main issue now is with accessing the OWA externally via our website.  (owa.xx.xx.au/owa) or connecting ANY Outlook to the server.
    When i connect to the exchange server via outlook it asks for the password again multiple times never authenticating it then time's out and says:
     " the action cannot be completed. the connection to microsoft exchange is unavailable, outlook must be online or
    connected to complete this action "
    then when i click on OK it goes to the General Tab and under microsoft exchange server: the name for it appears as 
    [email protected]
    with mailbox set as:
    =SMTP:[email protected]
    Currantly on our DNS i have
    mx=  10  mail.xx.xx.au
    CNAME= autodiscover  = mail.xx.xx.au
    CNAME= OWA = mail.xx.xx.au
    A = mail = 12.34.56.78 
    On our modem/router i have set one-to-one nat to our firewall IP
    On our firewall i have
    SMTP SAT and NAT to Exchange server
    HTTPS Sat and NAT to exchange Server
    HTTP Sat and Nat to exchange Server
    Port 587 SAT and Nat to exchange server
    pop SAT and NAt to exchange server
    Im willing to bet its something stupid i have overlooked but i was wondering if anyone would be able to help me out
    Regards
    Sibsy

    Hello,
    Firstly, please follow the Shadab's suggestion to check related virtual directory settings.
    Please make sure you use certificate that's created by a CA that's trusted by the client computer's operating system. 
    Please use get-outlookanywhere | fl cmdlet to check ExternalClientAuthenticationMethod. By default, the authentication is Negotiate.
    Cara Chen
    TechNet Community Support

  • Issues with Lotus to Exchange 2010 Invites

    Hello,
    I am having an issue with 1 or 2 users that happens when they are cc'd on a meeting invite from lotus notes. When these users are CC'd on an invite, the invite goes directly to the deleted items. I have checked for any rules in Outlook and did not see any
    rules for these users at all. I also checked them using OWA and there were none. This happens even if Outlook ios closed and the user is only logged into OWA. The first user that experienced this is not using a mobile device at all for accessing email so it
    does not appear to be related to a mobile device. We noticed this began right after migrating the user from Exchange 2003 to Exchange 2010, and believe it is related to that. 
    Thank you 
    Travis Van Ness

    Hi,
    Since it's an issue which seems more likely related to Exchange, we'd better post this question in Exchange forum:
    http://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
    Before that, we can still check some settings on Outlook to see if that may be related. Please try the following steps:
    Microsoft Outlook 2007
    From the Tools menu, select Options.
    Select the Preferences tab.
    Select the Email Options button, and then select the
    Advanced Email Options button.
    Make sure the Delete meeting request from Inbox when responding checkbox is not selected.
    Select the OK button on the three dialog boxes to close them.
    Microsoft Outlook 2010 & 2013
    Click the File tab, then Options, and then select
    Mail.
    Under the Send messages heading, make sure the Delete meeting requests and notifications from Inbox after responding checkbox is not selected.
    Click the OK button to close the dialog box.
    Hope this helps.
    Regards,
    Melon Chen
    TechNet Community Support

  • IPAD issue with app store loading..

    Hi All,
    I have very strange issue of using app store in my new Ipad. In my home network if I connects to app store it shows "loading..." and after few minutes it says "Cannot connect to iTunes Store" (But Safari web browser works fine and able to connect to any website. Using my laptop itunes, I am able to connect to itunes store.) The same problem is encountering in my Ipod Touch(IOS 6) also. But If I use any of these apple devices in any other network outside my home network(even with my neighbor's network who uses same service provider as me) it works very well. I use Beetel ADSL2+router(450TC1). Even I connected a new WiFi router to this modem and tried, but no luck. So guessing it has nothing to do with WiFi router. I am trying this for the past few weeks. Can anybody help to find out the issue?. I suspect it could be some issue with modem, because it works in all other networks..

    App store frequently asked questions
    http://support.apple.com/kb/HT2001
    Cannot connect to iTunes Store
    http://support.apple.com/kb/TS1368

  • IPad syncing with iCloud and Exchange = problems ?

    Greetings,
    I am using Apple products since 2 years ago. Everything started with an iPod Touch 64 and things grew to an iPhone4, iPad and now, an iPad 2.
    I also have a Motorola Xoom (Honeycomb 3.2 based), a Samsung Galaxy S2 and a HTC Desire Z with Android 2.3.3.
    All devices are configured to sync mails, calendar, contacts, notes and tasks with an Exchange Server. Until iOS5 and iCloud, there were no problems whatsoever. Contacts created on any device used to replicate to the others without a problem, although the iDevices (iOS based) never understood “categories”, a resource commonly used in an outlook environment to help sorting things out.
    Last week, Ibought the iPad2. Updated it and configured it to use the same Exchange Server as the other devices. Also, I chose to use iCloud.
    After that, I noticed that on a daily basis, contacts would appear without categories, first day, a few, around 5. Second day, 10 more. Third day, more 20. After the second day, I also noticed that the “display as” field (also known as “FiledAs”) was starting to show names with Last, First order. Here in Brazil we sort names as First Last. Of course, outlook, all android devices and also the iPad were all configured correctly (First, Last).
    The problem was getting bigger every day. Yesterday, 900+ of my almost 2000 contact list were mixed up, missing their categories and also had their first and last names changed in the Filed As field.
    After deleting, editing, restoring backups etc. more than once, I have finally found that the iCloud is probably the culprit.
    Changed my iPad config to keep from syncing with iCloud and configured it to backup locally.
    Deleted all accounts in all devices, deleted all data from contacts. Configured the accounts and left the devices syncing. Restored a backup. All devices synced and received the contacts.
    Surprise: problem solved. So far, no missing categories, no inverted First, Last names. Maybe if anyone find himself in the same situation, it might help.

    I have the same problem. My MacPro isn't on Lion, as I have lots of software that isn't compatible yet. But I have 10.7.2. on my MacBookPro and iOS5 on my iPhone and iPad.
    I would like to go to iCloud for those devices that are capable to run it, but I do not want to loose sync services for my MacPro which is on 10.6.8. Will iCloud and MobileMe be in sync until 30.06.2012, so I can use them in parallel, or do I have to wait until all computers are updated to Lion?

  • Calendar Sync Issue with Outlook 2007 / Exchange

    Contacts are syncing fine.
    I;ve tried Outlook 2003 and 2007... same problem with both.
    Here's the error:
    Microsoft Office Outlook
    'OutlookSyncClient' exited without properly closing your Outlook data file 'C:\Documents and Settings\Brandon\Local Settings\Application Data\Microsoft\Outlook\outlook.ost'. 'Microsoft Office Outlook' must be restarted. If this error message recurs, contact support for 'OutlookSyncClient' for assistance.
    Any help would be appreciated.

    So here's the only solution I've got so far and obviously it is not ideal...
    I switched to a different computer and installed outlook 2003. No calendar at all prior to this. Installed iTunes 7.4.x and plugged in the iPhone. I told it to sync contacts and calendar (merge) with Outlook. I DID NOT connect this outlook client to the exchange server at all.
    Worked like a charm. I still have no idea how to get this working with Exchange. OST by default is the way cached exchange stored files... so I'm welcome to any suggestions for somehow getting everything into a clean pst file that still syncs for offline use with exchange.
    APPLE - outlook sync is an issue. It's not just me (google search proves it).

  • IPad issue with WebAccess (8.0.2.hp2)

    Hi.
    Accessing the webaccess page is generally fine, when using an iPad.
    writing a new email also opens. recepient's address can be entered fine, same for
    subject. But the main "edit" for the email text cannot be used to enter any text,
    the focus & cursor cannot be placed in it.
    Who knows, what's going wrong here?
    Regards, Rudi.

    Hi.
    >This is the only way at the moment, I think... 'How to Enable IPads and
    >IPod Touches to Automatically Use GroupWise Webaccess Simple Templates'
    >(http://www.novell.com/support/php/se...rnalId=7006843)
    >There should be better support for iPad/iPhone in next GW release.
    I can't believe it!
    Hm. Just tried the "basic interface", now I'm wondering, if this really is the same
    as "Webaccess Simple Templates", I'll edit the config files as mentioned in
    TID7006843, thanks so far, Rudi.
    When using an IPad to access GroupWise Webaccess, the ability to navigate is
    hampered by the css (Cascading Style Sheets) that are used in the default view
    presented.
    Resolution
    The Webaccess Application can be modified to detect when an IPad or IPod Touch
    browser is accessing the system and return the simple templates instead of the css
    templates.
    To set this up, please follow the directions below:
    1. Locate the webacc.cfg file for your Webaccess Application. The default locations
    are listed below:
    a) Linux /OES2 - /var/opt/novell/groupwise/webaccess
    b) NetWare - sys:/novell/webaccess
    c) Windows - c:\novell\groupwise\webaccess
    2. Make a backup copy of the file before changes are made
    3. Open the file with a text editor
    4. Within the file, there will be a section where there will be many entries that
    start with "Templates.UserAgent.#.id=*string reported by browser*". Note the entry
    listed with the largest number. Afterward, create 4 new lines. If the highest
    existing number in an existing entry is 8, then an entry should be created like the
    one below:
    Templates.UserAgent.9.id=*iPad
    Templates.UserAgent.9.interface=simple
    Templates.UserAgent.10.id=*iPod
    Templates.UserAgent.10.interface=simple
    5. Save and exit the file
    6. Restart Tomcat using the one of the commands below and then test with your IPad.
    a. To restart Tomcat on NetWare enter the following commands from the console
    java -exit
    tomcat4.ncf
    b. To restart Tomcat on Windows, open the Services Console and right-click Tomcat
    5.5 and choose Stop and then right click again and choose Start.
    c. To restart Tomcat on Linux/OES2, open an terminal window as the root user and
    issue the command "rcnovell-tomcat5 restart". On other SuSE Linux Enterprise
    distributions, the command will be "rctomcat# restart" where the # sign represents
    the version of Tomcat that is running.

  • Anyone else experience iOS 8 iPad issues with multitasking gestures?

    I've had several instances where the multitasking gestures do not respond on my iPad mini.  When using the 4-finger swipe up (equivelent to double click the home button), instead of entering the multitasking view, the visible app senses me trying to scroll.  I tried this gesture from the Settings app in landscape mode and both sides of the app scrolled.  Restarting my iPad fixes this issue temporarilly.
    On another occasion, while trying to switch between apps by swiping left to right with 4 fingers, SpringBoard crashed and restarted.
    Anyone else seeing these kinds of issues?  How best to report to Apple?

    Yes, I have this on an iPad Air after updating to IOS 8. The pinch option seems to randomly quit working. It you go to Settings and turn off Multitasking Gestures, leave Settings, and go back in to Settings and re-enable Multitasking Gestures it works again for a while but will then randomly quit again. It seems like it is only the pinch option that quits working.
    I have found that when I have the problem I can pull down the Notification screen, or pull up the settings screen using the one finger swipe up or swipe down option and then the pinch options works again. Since I found this circumvention and don't have to toggle the setting it is not as annoying, but I still wind up trying to pinch multiple times before I realize it has quit working so I agree this should be fixed soon.

  • IPad issue with opening PDF

    Since latest update I am unable to open any PDF files on my iPad (gen 3).  Anyone else having this issue and know how to resolve?

    Try resetting your iPad. Hold down the Home and Sleep/Wake buttons at the same time. Keep holding them down until you see the Apple logo, then let go. Reopen Adobe Reader.

  • TS4036 iPad issues with iCloud

    I received the following pop-up  --> iCloud Backup - This iPad hasn't been backed up in 2 weeks. Backup happen when this iPad is plugged in, locked, ans connected to Wifi.  but when I hit OK nothing happens, the pop-up remains.  I have charged iPad to 100% and tried again with no luck.
    Anyone have any ideas

    Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

  • Sharing iPad issues with app store

    My daughter and I share an iPad. Each time I try to install an app her account id appears and won't allow me to sign in. Please tell me how to avoid the preset id from appearing.

    There is no "preset" ID.
    The ID is whichever ID is signed into the store.
    Settings > Store, tap the ID, then Sign out and Sign in with the account you want.

  • HT4236 Synching photo on ipad: issue with portrait format

    How do you manage to have portrait photo on your computer, remain portrait photo on you ipad?
    Recently my portrait photos appear as landscape on my ipad.
    I have tried saving them on a different name, still does not work
    Any solution?

    I got the file so I was able to check what I was thinking about.
    It's really puzzling because there is no official way to do that : columns 13 thru 52 were available but were zero width ones.
    Even with a script we can't set a coliumn width smaller than 8.
    I don't know the story of the document.
    Maybe it was imported from an application allowing zero width columns (AppleWorks for instance).
    I know a way to achieve this setting : define the width to zero in the index.xml file.
    Yvan KOENIG (VALLAURIS, France) jeudi 5 avril 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

  • IPAD issues with wrt54G

    Hi,  has anyone had problems with  Ipads connecting using wrt54g.  I have had my ipad for about a month and it had been working perfectly when it suddenly dropped out.  I can see the signal and connection is ticked under wifi but it acts as if I'm not connected.  I have tried reseting and changing key from wep to wpa2 (no signal at all).  The IP address starts with 169.254 instead of 192.168.1.1.  My iphone connection works perfectly?? On safari an error reads "the connection to the server failed".  Apple support tried to change the security key to WPA but as mentioned above no good at all. 
    Can anyone help
    pete

    You are getting the wrong ip address on ipad. Follow this link and check if that helps.

  • IPad issue with safari.

    I am trying to download software to make a hard bound photo book.  I keep getting safari cannot run application?  I have first generation iPad  

    You cannot download software via Safari on the iPad - 'normal' PC and Mac (OS X) programs do not work on the iPad (iOS), they are different operating systems. You can only install apps (programs) from the iTunes App Store on your computer or the App Store app directly on the iPad. Have you checked to see whether they have their own app in the store ?

Maybe you are looking for