Ipad Keyboard (one with docking station attached to keyboard)

I had just recently purchased the Ipad keyboard, the one with the docking station attached to the keyboard. The problem is I use it in my car a lot and find it difficult to use. Is there anything 3rd party that will allow me to connect a cable to the ipad and then one to the keyboard so that I can type without the Ipad being in the docking station. It would be so much easier to use. Additionally I have to remove my Ipad from it's case to use it as well and risk damaging it when it's not in a case. Any feedback and assistance would be greatly appreciated. Thanks for your time everyone.

Yes there is. Check it out here.

Similar Messages

  • IPad battery use with docking station

    I am buying a docking station for my ipad 3 to play my music and want to know what happens to the battery In the iPad, does it keep charging? Does it ruin the battery? Any advice is appreciated

    Save Battery
    1. Lower brightness (Major)
    2. Turn off WiFi when not using
    3. Turn off 3G when not using
    4. Turn off Bluetooth when not using
    5. Minimize use of Location Service; you can turn it off for certain apps
    6. Turn off push notification (Major)
    7. Fetch new data less frequently or manually
    8. Turn off push mail (Major)
    9. Auto-check fewer mail account
    10. Settings>General>Background App Refresh>Off

  • IPod will not work with docking stations

    My 5th gen iPod works fine except it will not work with docking stations. I can sync it with my computer and it plays fine, just won't work with docking stations and other accessories like the Belkin FM radio converter. I bought a iMode boom box and it does not work properly with my iPod.
    Any ideas??

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Also:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Labview for laptop with dock station.

    I use labview on desk top computer and it works fine. But, after I use it on a laptop with dock station, it does not work. I use the exact setting and configuration and I have no idea why does not work? Any suggestion. Thanks.

    There isn't any kind of information you've provided for anyone to be able to help you.
    "It does not work" could mean millions of things.  How is it not working?
    What "exact setting and configuration" are you talking about?
    Does it work when the laptop is not on the docking station?

  • Connect multiple devices to one Thunderbolt port with docking station

    Hello everybody,
    for a video editing setup I would like to use all devices connected until now directly to my iMac just with a Thunderbolt docking station on only one Thunderbolt port. What I do not understand is, whether bitrate will stay the same for each device or will be splitted? Has this to do with daisy chaining Thunderbolt devices?
    So this will be the setup:
    1 Thunderbolt cable from iMac to Thunderbolt docking station
    devices connected to docking station:
    one Blackmagic Intensity Shuttle Thunderbolt
    one external USB 2.0 hard drive
    one external USB 3.0 hard drive
    external HDMI monitor
    Ethernet connection
    So the general question is, will all of these devices get only part of the bitrate that Thunderbolt provides or can each device, theoretically, get full Thunderbolt bitrate?
    And are there different types of Thunderbolt cables (Thunderbolt 1 or 2) that I have to pay attention to?
    Regards DonTimo

    Also, if you use the Apple 27" Thunderbolt Display, it will have an additional Thunderbolt and Firewire ports on its back.

  • T510 with docking station and SD-8821 external keyboard - stupid Fx key settings

    So I have a 510.  Its running XP Pro.  It is attached to a docking station and I have an SD-8821 external "slim" keyboard pulgged in. 
    My problem is the row of function keys along the top.  I need to use F1 through F12 often in my work, the keys are set to control stuff like volume, sleep, lock, etc.  In order to get the Fx function, I have to press the Fn key first.
    I have scoured the internet and there seems to be a an app to change this but my notebook does not have it.  I cannot find it on the Lenovo web site either.  How do I get it?  This is driving me nuts.
    Solved!
    Go to Solution.

    Found this (nice link):
    http://webcache.googleusercontent.com/search?q=cac​he:ep7RysRfC6cJ:www-307.ibm.com/pc/support/site.ws​...
    Having it installed, the Lenovo Slim USB Keyboard app appeared in my Start menu.

  • ESata for T420s with docking station

    I notice the Mini Dock Plus Series 3 - 90W 433810U (as apposed to Mini Dock Series 3 - 90W 433710U) has a eSata port. Will this work with a T420s (which doesn't)?
    I'm planning to buy a docking station and use it to connect my 30" 2560x1600 display using a (active) dual-link DVI adaptor but I would also like to use a eSata disk attached. This will decide if I shell out the extra $$$ for the Plus dock or the regular one.
    thanks
    Ash

    According to http://support.lenovo.com/en_LK/product-and-parts/detail.page?&LegacyDocID=MIGR-72873, the dock is compatible with the T420s.
    If it's like my 135W and 170W docks, you set the dock for the number 2 position which is less than ideal but works.  eSATA off the dock should work fine.

  • Keyboard setting on docking station

    I jst got the official docking station with german keyboard for my iPad 1.
    Unfortunatelly my Keyboard settings are always set to German (Suisse) Keyboard,
    and whatever I change in my iPad Settings is not changing anything at all.
    Is this an issue of the dock or the OS 4.3.2.???

    Would have been easier if you had just responded to your other question.
    You will have to check with Sylvania and Dynex to find out if this combination will work. I would start with Sylvania.

  • No longer working with docking station

    Second time this has happened. I had my iPhone 3GS working fine through a docking station for music -- now all of a sudden it only plays through the iphone speaker. Previous iPhone did the same thing with another docking station - worked then stopped working one day. Any fix suggested?

    Which docking station - make and model?

  • Dual Screen ThinkPad W520 with docking station

    I'm trying to use an external monitor with my docking station to extend my desktop but I can't get it to work.
    I'm using the intel HD video card and I already followed thoses guide
    https://wiki.archlinux.org/index.php/Intel
    https://wiki.archlinux.org/index.php/Xo … ual_screen
    /etc/X11/xorg.conf.d/20-intel.conf
    Section "Device"
        Identifier "old intel stuff"
        Driver "intel"
        Option "Shadow" "True"
        Option "DRI" "false"
    EndSection
    /etc/modprobe.d/modprobe.conf
    options i915 modeset=1
    /etc/mkinitcpio.conf
    MODULES="intel_agp i915"
    FILES="/etc/modprobe.d/modprobe.conf
    mkinitcpio -p linux
    reboot
    The output of xrandr -q is VGA1 disconnected even if it's plugged in the dock or the laptop itself.
    Do you guys have any clues?
    thanks

    I'm not sure what log message I should look at. I already looked at the Xorg log
    [ 184.940]
    X.Org X Server 1.11.3
    Release Date: 2011-12-16
    [ 184.941] X Protocol Version 11, Revision 0
    [ 184.941] Build Operating System: Linux 3.1.5-1-ARCH x86_64
    [ 184.941] Current Operating System: Linux DUDE-ARCHLINUX 3.2.1-1-ARCH #1 SMP PREEMPT Fri Jan 13 06:50:31 CET 2012 x86_64
    [ 184.941] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/disk/by-uuid/216a6a09-6be1-47c8-8147-377642302ba6 ro quiet splash
    [ 184.941] Build Date: 17 December 2011 09:17:41AM
    [ 184.941]
    [ 184.941] Current version of pixman: 0.24.0
    [ 184.941] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 184.941] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 184.942] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 24 09:14:51 2012
    [ 184.951] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 184.980] (==) No Layout section. Using the first Screen section.
    [ 184.980] (**) |-->Screen "Screen0" (0)
    [ 184.980] (**) | |-->Monitor "Monitor0"
    [ 184.980] (**) | |-->Device "Device0"
    [ 184.980] (==) Automatically adding devices
    [ 184.980] (==) Automatically enabling devices
    [ 185.024] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 185.024] Entry deleted from font path.
    [ 185.043] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 185.043] Entry deleted from font path.
    [ 185.043] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 185.044] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 185.044] Entry deleted from font path.
    [ 185.044] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 185.044] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 185.044] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 185.044] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 185.044] (II) Loader magic: 0x7ccae0
    [ 185.044] (II) Module ABI versions:
    [ 185.044] X.Org ANSI C Emulation: 0.4
    [ 185.044] X.Org Video Driver: 11.0
    [ 185.044] X.Org XInput driver : 13.0
    [ 185.044] X.Org Server Extension : 6.0
    [ 185.046] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21d1 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
    [ 185.046] (--) PCI: (0:1:0:0) 10de:0dfa:17aa:21d1 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
    [ 185.046] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 185.046] (II) LoadModule: "extmod"
    [ 185.075] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 185.089] (II) Module extmod: vendor="X.Org Foundation"
    [ 185.089] compiled for 1.11.3, module version = 1.0.0
    [ 185.089] Module class: X.Org Server Extension
    [ 185.089] ABI class: X.Org Server Extension, version 6.0
    [ 185.089] (II) Loading extension MIT-SCREEN-SAVER
    [ 185.089] (II) Loading extension XFree86-VidModeExtension
    [ 185.089] (II) Loading extension XFree86-DGA
    [ 185.089] (II) Loading extension DPMS
    [ 185.089] (II) Loading extension XVideo
    [ 185.089] (II) Loading extension XVideo-MotionCompensation
    [ 185.089] (II) Loading extension X-Resource
    [ 185.089] (II) LoadModule: "dbe"
    [ 185.089] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 185.090] (II) Module dbe: vendor="X.Org Foundation"
    [ 185.090] compiled for 1.11.3, module version = 1.0.0
    [ 185.090] Module class: X.Org Server Extension
    [ 185.090] ABI class: X.Org Server Extension, version 6.0
    [ 185.090] (II) Loading extension DOUBLE-BUFFER
    [ 185.090] (II) LoadModule: "glx"
    [ 185.090] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 185.104] (II) Module glx: vendor="X.Org Foundation"
    [ 185.105] compiled for 1.11.3, module version = 1.0.0
    [ 185.105] ABI class: X.Org Server Extension, version 6.0
    [ 185.105] (==) AIGLX enabled
    [ 185.105] (II) Loading extension GLX
    [ 185.105] (II) LoadModule: "record"
    [ 185.105] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 185.106] (II) Module record: vendor="X.Org Foundation"
    [ 185.106] compiled for 1.11.3, module version = 1.13.0
    [ 185.106] Module class: X.Org Server Extension
    [ 185.106] ABI class: X.Org Server Extension, version 6.0
    [ 185.106] (II) Loading extension RECORD
    [ 185.106] (II) LoadModule: "dri"
    [ 185.106] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 185.117] (II) Module dri: vendor="X.Org Foundation"
    [ 185.117] compiled for 1.11.3, module version = 1.0.0
    [ 185.117] ABI class: X.Org Server Extension, version 6.0
    [ 185.117] (II) Loading extension XFree86-DRI
    [ 185.117] (II) LoadModule: "dri2"
    [ 185.118] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 185.118] (II) Module dri2: vendor="X.Org Foundation"
    [ 185.118] compiled for 1.11.3, module version = 1.2.0
    [ 185.118] ABI class: X.Org Server Extension, version 6.0
    [ 185.118] (II) Loading extension DRI2
    [ 185.118] (II) LoadModule: "intel"
    [ 185.119] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 185.135] (II) Module intel: vendor="X.Org Foundation"
    [ 185.135] compiled for 1.11.2, module version = 2.17.0
    [ 185.135] Module class: X.Org Video Driver
    [ 185.135] ABI class: X.Org Video Driver, version 11.0
    [ 185.135] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    [ 185.136] (--) using VT number 7
    [ 185.148] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 185.148] drmOpenDevice: node name is /dev/dri/card0
    [ 185.148] drmOpenDevice: open result is 8, (OK)
    [ 185.148] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 185.148] drmOpenDevice: node name is /dev/dri/card0
    [ 185.148] drmOpenDevice: open result is 8, (OK)
    [ 185.148] drmOpenByBusid: drmOpenMinor returns 8
    [ 185.148] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 185.148] (**) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 185.148] (==) intel(0): RGB weight 888
    [ 185.148] (==) intel(0): Default visual is TrueColor
    [ 185.148] (**) intel(0): Option "DRI" "false"
    [ 185.148] (**) intel(0): Option "Shadow" "True"
    [ 185.148] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
    [ 185.148] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)"
    [ 185.149] (**) intel(0): Shadow buffer enabled, 2D GPU acceleration disabled.
    [ 185.149] (**) intel(0): Relaxed fencing enabled
    [ 185.149] (**) intel(0): Wait on SwapBuffers? enabled
    [ 185.149] (**) intel(0): Triple buffering? enabled
    [ 185.149] (**) intel(0): Framebuffer tiled
    [ 185.149] (**) intel(0): Pixmaps tiled
    [ 185.149] (**) intel(0): 3D buffers tiled
    [ 185.149] (**) intel(0): SwapBuffers wait enabled
    [ 185.149] (==) intel(0): video overlay key set to 0x101fe
    [ 185.149] (II) intel(0): Output LVDS1 using monitor section Monitor0
    [ 185.149] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
    [ 185.149] (II) intel(0): Output VGA1 has no monitor section
    [ 185.150] (II) intel(0): EDID for output LVDS1
    [ 185.150] (II) intel(0): Manufacturer: LEN Model: 40b1 Serial#: 0
    [ 185.150] (II) intel(0): Year: 2009 Week: 0
    [ 185.150] (II) intel(0): EDID Version: 1.3
    [ 185.150] (II) intel(0): Digital Display Input
    [ 185.150] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 185.150] (II) intel(0): Gamma: 2.20
    [ 185.150] (II) intel(0): DPMS capabilities: StandBy Suspend Off
    [ 185.150] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 185.150] (II) intel(0): First detailed timing is preferred mode
    [ 185.150] (II) intel(0): redX: 0.610 redY: 0.348 greenX: 0.316 greenY: 0.589
    [ 185.150] (II) intel(0): blueX: 0.151 blueY: 0.066 whiteX: 0.313 whiteY: 0.329
    [ 185.150] (II) intel(0): Manufacturer's mask: 0
    [ 185.150] (II) intel(0): Supported detailed timing:
    [ 185.150] (II) intel(0): clock: 108.5 MHz Image Size: 345 x 194 mm
    [ 185.150] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1920 h_border: 0
    [ 185.150] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 942 v_border: 0
    [ 185.150] (II) intel(0): Supported detailed timing:
    [ 185.150] (II) intel(0): clock: 90.4 MHz Image Size: 345 x 194 mm
    [ 185.150] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1920 h_border: 0
    [ 185.150] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 942 v_border: 0
    [ 185.150] (II) intel(0): Unknown vendor-specific block f
    [ 185.150] (II) intel(0): LP156WD1-TLB2
    [ 185.150] (II) intel(0): EDID (in hex):
    [ 185.150] (II) intel(0): 00ffffffffffff0030aeb14000000000
    [ 185.150] (II) intel(0): 0013010380231378ea43c59c59519626
    [ 185.150] (II) intel(0): 11505400000001010101010101010101
    [ 185.150] (II) intel(0): 010101010101622a404061842a303020
    [ 185.150] (II) intel(0): 350059c2100000195323404061842a30
    [ 185.150] (II) intel(0): 3020350059c2100000190000000f00a9
    [ 185.150] (II) intel(0): 0932a9092816090030e40002000000fe
    [ 185.150] (II) intel(0): 004c503135365744312d544c423200e2
    [ 185.150] (II) intel(0): EDID vendor "LEN", prod id 16561
    [ 185.151] (II) intel(0): Printing DDC gathered Modelines:
    [ 185.151] (II) intel(0): Modeline "1600x900"x0.0 108.50 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (56.5 kHz)
    [ 185.151] (II) intel(0): Modeline "1600x900"x0.0 90.43 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (47.1 kHz)
    [ 185.151] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 185.151] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 185.151] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 185.151] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 185.151] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 185.151] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 185.151] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 185.151] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 185.151] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 185.151] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 185.151] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 185.151] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 185.151] (II) intel(0): Printing probed modes for output LVDS1
    [ 185.151] (II) intel(0): Modeline "1600x900"x60.0 108.50 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (56.5 kHz)
    [ 185.151] (II) intel(0): Modeline "1600x900"x50.0 90.43 1600 1648 1680 1920 900 903 908 942 -hsync -vsync (47.1 kHz)
    [ 185.151] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 185.151] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 185.151] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 185.151] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 185.151] (II) intel(0): EDID for output VGA1
    [ 185.151] (II) intel(0): Output LVDS1 connected
    [ 185.151] (II) intel(0): Output VGA1 disconnected
    [ 185.151] (II) intel(0): Using exact sizes for initial modes
    [ 185.151] (II) intel(0): Output LVDS1 using initial mode 1600x900
    [ 185.152] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 185.152] (II) intel(0): Kernel page flipping support detected, enabling
    [ 185.152] (**) intel(0): Display dimensions: (448, 254) mm
    [ 185.152] (WW) intel(0): Probed monitor is 350x190 mm, using Displaysize 448x254 mm
    [ 185.152] (**) intel(0): DPI set to (90, 90)
    [ 185.152] (II) Loading sub module "fb"
    [ 185.152] (II) LoadModule: "fb"
    [ 185.152] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 185.153] (II) Module fb: vendor="X.Org Foundation"
    [ 185.153] compiled for 1.11.3, module version = 1.0.0
    [ 185.153] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 185.153] (==) Depth 24 pixmap format is 32 bpp
    [ 185.153] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
    [ 185.157] (II) UXA(0): Driver registered support for the following operations:
    [ 185.157] (II) solid
    [ 185.157] (II) copy
    [ 185.157] (II) composite (RENDER acceleration)
    [ 185.157] (II) put_image
    [ 185.157] (II) get_image
    [ 185.157] (==) intel(0): Backing store disabled
    [ 185.157] (==) intel(0): Silken mouse enabled
    [ 185.157] (II) intel(0): Initializing HW Cursor
    [ 185.223] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 185.227] (==) intel(0): DPMS enabled
    [ 185.227] (==) intel(0): Intel XvMC decoder enabled
    [ 185.227] (WW) intel(0): Disabling Xv because no adaptors could be initialized.
    [ 185.227] (II) intel(0): direct rendering: Disabled
    [ 185.227] (==) intel(0): hotplug detection: "enabled"
    [ 185.227] (--) RandR disabled
    [ 185.227] (II) Initializing built-in extension Generic Event Extension
    [ 185.227] (II) Initializing built-in extension SHAPE
    [ 185.227] (II) Initializing built-in extension MIT-SHM
    [ 185.227] (II) Initializing built-in extension XInputExtension
    [ 185.227] (II) Initializing built-in extension XTEST
    [ 185.227] (II) Initializing built-in extension BIG-REQUESTS
    [ 185.227] (II) Initializing built-in extension SYNC
    [ 185.227] (II) Initializing built-in extension XKEYBOARD
    [ 185.227] (II) Initializing built-in extension XC-MISC
    [ 185.227] (II) Initializing built-in extension SECURITY
    [ 185.227] (II) Initializing built-in extension XINERAMA
    [ 185.227] (II) Initializing built-in extension XFIXES
    [ 185.227] (II) Initializing built-in extension RENDER
    [ 185.227] (II) Initializing built-in extension RANDR
    [ 185.227] (II) Initializing built-in extension COMPOSITE
    [ 185.227] (II) Initializing built-in extension DAMAGE
    [ 185.254] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 185.254] (II) AIGLX: Screen 0 is not DRI capable
    [ 185.582] (II) AIGLX: Loaded and initialized swrast
    [ 185.582] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 185.583] (II) intel(0): Setting screen physical size to 448 x 254
    [ 185.918] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 185.918] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 185.918] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 185.918] (II) LoadModule: "evdev"
    [ 185.919] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 185.932] (II) Module evdev: vendor="X.Org Foundation"
    [ 185.932] compiled for 1.10.99.902, module version = 2.6.0
    [ 185.932] Module class: X.Org XInput Driver
    [ 185.932] ABI class: X.Org XInput driver, version 13.0
    [ 185.932] (II) Using input driver 'evdev' for 'Power Button'
    [ 185.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 185.933] (**) Power Button: always reports core events
    [ 185.933] (**) Power Button: Device: "/dev/input/event3"
    [ 185.933] (--) Power Button: Found keys
    [ 185.933] (II) Power Button: Configuring as keyboard
    [ 185.933] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 185.933] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 185.933] (**) Option "xkb_rules" "evdev"
    [ 185.933] (**) Option "xkb_model" "evdev"
    [ 185.933] (**) Option "xkb_layout" "us, ca"
    [ 185.933] (**) Option "xkb_options" "grp:caps_toggle"
    [ 185.997] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 185.997] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 185.997] (**) Video Bus: Applying InputClass "keyboard-layout"
    [ 185.997] (II) Using input driver 'evdev' for 'Video Bus'
    [ 185.997] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 185.997] (**) Video Bus: always reports core events
    [ 185.997] (**) Video Bus: Device: "/dev/input/event4"
    [ 185.997] (--) Video Bus: Found keys
    [ 185.997] (II) Video Bus: Configuring as keyboard
    [ 185.997] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
    [ 185.997] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 185.997] (**) Option "xkb_rules" "evdev"
    [ 185.997] (**) Option "xkb_model" "evdev"
    [ 185.997] (**) Option "xkb_layout" "us, ca"
    [ 185.997] (**) Option "xkb_options" "grp:caps_toggle"
    [ 185.999] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [ 185.999] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 185.999] (**) Video Bus: Applying InputClass "keyboard-layout"
    [ 185.999] (II) Using input driver 'evdev' for 'Video Bus'
    [ 185.999] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 185.999] (**) Video Bus: always reports core events
    [ 185.999] (**) Video Bus: Device: "/dev/input/event5"
    [ 185.999] (--) Video Bus: Found keys
    [ 185.999] (II) Video Bus: Configuring as keyboard
    [ 185.999] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input5/event5"
    [ 185.999] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 185.999] (**) Option "xkb_rules" "evdev"
    [ 185.999] (**) Option "xkb_model" "evdev"
    [ 185.999] (**) Option "xkb_layout" "us, ca"
    [ 185.999] (**) Option "xkb_options" "grp:caps_toggle"
    [ 186.000] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 186.000] (II) No input driver/identifier specified (ignoring)
    [ 186.001] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 186.001] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 186.001] (**) Sleep Button: Applying InputClass "keyboard-layout"
    [ 186.001] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 186.001] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 186.001] (**) Sleep Button: always reports core events
    [ 186.001] (**) Sleep Button: Device: "/dev/input/event2"
    [ 186.001] (--) Sleep Button: Found keys
    [ 186.001] (II) Sleep Button: Configuring as keyboard
    [ 186.001] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
    [ 186.001] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 186.001] (**) Option "xkb_rules" "evdev"
    [ 186.001] (**) Option "xkb_model" "evdev"
    [ 186.001] (**) Option "xkb_layout" "us, ca"
    [ 186.001] (**) Option "xkb_options" "grp:caps_toggle"
    [ 186.002] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8)
    [ 186.002] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
    [ 186.002] (**) Integrated Camera: Applying InputClass "keyboard-layout"
    [ 186.002] (II) Using input driver 'evdev' for 'Integrated Camera'
    [ 186.002] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 186.002] (**) Integrated Camera: always reports core events
    [ 186.002] (**) Integrated Camera: Device: "/dev/input/event8"
    [ 186.003] (--) Integrated Camera: Found keys
    [ 186.003] (II) Integrated Camera: Configuring as keyboard
    [ 186.003] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8/event8"
    [ 186.003] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
    [ 186.003] (**) Option "xkb_rules" "evdev"
    [ 186.003] (**) Option "xkb_model" "evdev"
    [ 186.003] (**) Option "xkb_layout" "us, ca"
    [ 186.003] (**) Option "xkb_options" "grp:caps_toggle"
    [ 186.004] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
    [ 186.004] (II) No input driver/identifier specified (ignoring)
    [ 186.004] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 186.004] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 186.004] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-layout"
    [ 186.004] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 186.005] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 186.005] (**) AT Translated Set 2 keyboard: always reports core events
    [ 186.005] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 186.005] (--) AT Translated Set 2 keyboard: Found keys
    [ 186.005] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 186.005] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 186.005] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 186.005] (**) Option "xkb_rules" "evdev"
    [ 186.005] (**) Option "xkb_model" "evdev"
    [ 186.005] (**) Option "xkb_layout" "us, ca"
    [ 186.005] (**) Option "xkb_options" "grp:caps_toggle"
    [ 186.006] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
    [ 186.006] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 186.006] (II) LoadModule: "synaptics"
    [ 186.006] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 186.016] (II) Module synaptics: vendor="X.Org Foundation"
    [ 186.016] compiled for 1.11.0, module version = 1.5.0
    [ 186.016] Module class: X.Org XInput Driver
    [ 186.016] ABI class: X.Org XInput driver, version 13.0
    [ 186.016] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 186.016] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 186.016] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 186.016] (**) Option "Device" "/dev/input/event9"
    [ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
    [ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
    [ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    [ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 186.346] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 186.346] (**) Option "TapButton1" "1"
    [ 186.346] (**) Option "TapButton2" "2"
    [ 186.347] (**) Option "TapButton3" "3"
    [ 186.453] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 186.453] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 186.560] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 186.560] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 186.560] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 186.560] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 186.560] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
    [ 186.560] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 186.560] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 186.560] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 186.560] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 186.560] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 186.561] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 186.561] (II) No input driver/identifier specified (ignoring)
    [ 186.562] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event10)
    [ 186.562] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 186.562] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 186.562] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 186.562] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 186.562] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event10"
    [ 186.562] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 186.562] (--) TPPS/2 IBM TrackPoint: Found relative axes
    [ 186.562] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 186.562] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 186.562] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 186.562] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 186.562] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input10/event10"
    [ 186.562] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
    [ 186.562] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 186.562] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 186.563] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 186.563] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 186.563] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 186.563] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
    [ 186.563] (II) No input driver/identifier specified (ignoring)
    [ 186.564] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
    [ 186.564] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 186.564] (**) ThinkPad Extra Buttons: Applying InputClass "keyboard-layout"
    [ 186.564] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 186.564] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 186.564] (**) ThinkPad Extra Buttons: always reports core events
    [ 186.564] (**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
    [ 186.564] (--) ThinkPad Extra Buttons: Found keys
    [ 186.564] (II) ThinkPad Extra Buttons: Configuring as keyboard
    [ 186.564] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event6"
    [ 186.564] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
    [ 186.564] (**) Option "xkb_rules" "evdev"
    [ 186.564] (**) Option "xkb_model" "evdev"
    [ 186.565] (**) Option "xkb_layout" "us, ca"
    [ 186.565] (**) Option "xkb_options" "grp:caps_toggle"
    Last edited by mtetreault (2012-01-24 14:17:56)

  • T61p dual monitor with docking station, maximum resolution

    I wonder what is the maximal resolution one can get with the quadro fx 570m. I specially want to reach the 2560x1600+2560x1600 with two 30'' monitors. Does anyone know about it or have experience with it?
    dual monitor with docking station

    You will need the huge docking station with Dual-Display Port & DVI. Then it should work, but you will only be able to use 2 displays at once (one external+laptop LCD or 2 external). But I think you already know that.
    VGA on such resolution would be suicidal and i doubt it would even work.
    ThinkPad T61p | 15,4 WSXGA+ | Intel Core2Duo T9300 2.5GHz | 4GB CL4 DDR2 RAM | nVidia Quadro FX 570M | Win7 Ultimate x64

  • Itunes on my 4s not working properly with docking stations

    Just in the last week itunes on my 4s won't work properly with my docking stations. I have one at home that is my alarm clock and while my phone will charge when my alarm goes off it will not play music, it just beeps which is what it does when the alarm goes off and the phone is not on it. If I press play on my the Itunes app itself it will play music. I have a station at work that I use daily as well, and same thing there, if I press the play button the station it won't work, but if press the play button on the app it will play. I believe it is an Itunes app issue because it will work as it is supposed to with the pandora appg. Anyone else having this type of issue? Any suggestions or tips are welcome.

    Get a magnifying glass and closely inspect your dock connector and clean any dirt, debris, dust bunnies, corrosion or anything else you find.

  • Still annoying stuck at 0.8Ghz with docking station

    if I put my W520 in sleep modus, put in my docking station and start it, it's still stuck at 0,8Ghz! Even throttlestop wont work here!!
    taking it off and on the docking station while running makes no difference. oh wrong, there is a difference: as long it is OFF the docking station on battery only, I can get full speed with turbo boost through throttle stop, but beware if I put it on the docking station again ....
    only thing I can do is restart the laptop, then I get the message: the wattage of the power adapter is too low compared to the one the system was shipeed with (I HAVE the original 170W power adapter on my docking station!!), and then it starts with TB working fine.
    will these issues ever have an end, lenovo?
    Solved!
    Go to Solution.

    Thanks for information. The new BIOS totally skipped my attention.
    I had power manager unsinstalles and the 1.26 Bios. with the new 1.30, the problem seems to be solved, at least this time.
    Great!

  • T400 with docking stations, ThinkPad Advanced Dock and ThinkPad Dock II

    Hello,
    I think of buying the ThinkPad T400 with one of these docking stations: ThinkPad Advanced Dock or ThinkPad Dock II.
    I have several technical questions and haven't found neither appropriate information, nor the way to get it.
    Here are my questions:
    1. Do these docking stations support DVI when T400 with integrated (not discrete) graphics is connected? 
    2. Where can I find a complete list of UltraBay devices supported by each one of these docking stations?
    Thanks

    I have a T400 with integrated graphics and recently purchased the Advanced Mini Dock 250410U.  The Advanced Dock and Advanced Mini Dock support DVI pass-through.  I looked into this before purchasing as well.
    This page will confirm the feature:  http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72148.  Also see reference guide for docking stations: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4TPJF4 which says ThinkPad Dock II is discontinued.  This brochure says the Advanced Mini Dock does not support Ultrabay, but the Advanced Dock does.  http://download.lenovo.com/ibmdl/pub/pc/pccbbs/options_iso/tp_docking_solutions_june09.pdf .

  • W520 only charges with docking station wall plug does not work

    I have experienced this problem twice and am very confused about why it is occuring. 
    I usually use my W520 laptop on a docking station and when I am at home or travelling I keep it powered by with a wall adapter.  So at work it stays charged and operating from the docking station (i.e. ports on the bottom of the laptop).  When I am at home it stays charged by pulling it in using the Lenovo (170W power adapter).
    Last year I was in China working and all of a sudden my laptop would no longer charge and would shutdown when the battery died) with the wall adapter.  I ended up buying a docking station and managed to keep it charged and operating that way.  Obtaining any type of warranty service in China was a major pain but the problem was diagnosed to be an issue with my motherboard.  I returned to Canada and had my computer replaced (computer was about 3 months old).
    Now I am back in Canada and have the same problem with my new replacement laptop.  I am puzzled why this keeps happening.  Has this occured with anyone else?  Is the plug on the W520 not very good quality?  Any thoughts or suggestions will be super appreciated. 

    Thanks for the reply. Actually everyone always thinks it is a problem with the power adapter cable but the cable I am using is the same one for my dock. I only had one cable for my dock and when I am travelling unpug it and use it when I am on the road.
    Last time in China they took apart my computer and confirmed (I was watching them as they used the voltmeter) that power and proper voltgage was coming into my computer from the plug and all the way to the board (ie checking every interface along the way). Yet it was not charging the battery or providing power to run the computer. The only way to solv the problem was to use a dock. Only thing I could think of is that maybe something on the bottomdock connector is messed up and hence the computer believes it is connected to the dock and hence not wanting to provide power via the power adapter at the same time to avoid shorting out the board. Any thoughts?

Maybe you are looking for