Ipad locked and password forgotten
My iPad is blocked and I lost password. How to restore it because it does not appear in iTunes ?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to put your iPad in Recovery Mode
http://support.apple.com/kb/ht4097
Similar Messages
-
I want to play music bought from itunes on my new computer but apple id is old email address no longer accessible and password forgotten. Security information date of birth also not accepted. No good apple sending reset information to old email address as I cannot access it
Welcome to the Apple Community.
The following article(s) may help you.
Moving your iTunes library to a new computer -
Need remote lock and password reset
This question is in regards to this thread:
https://social.technet.microsoft.com/Forums/windows/en-US/499f83d0-36f8-4f29-a4ce-e32f76632c90/intunesccm-mobile-application-management?forum=microsoftintuneprod
-We currently have ConfigMgr 2012 R2 and want to start using Intune to support company owned iOS devices.
-We must have the ability to perform remote lock and password reset on our iOS devices.
-According to this link https://technet.microsoft.com/en-us/library/dn600286.aspx this is not possible with ConfigMgr integration. So I assume this means I
should NOT integrate Intune with our ConfigMgr right now, correct? And according to the response referenced above, Microsoft plans on erasing this disparity in the future, so I guess I should just wait until then and use Intune standalone until
then? correct? But at some point it should be safe to do so, correct?
While I am not in this position, it appears that when you are setting up Intune with ConfigMgr you get to a point of no return where you "Set the Mobile Device Management Authority" and the prompt says this is permanent. For those that
have integrated ConfigMgr, does that mean they are stuck and have no option to change to using Intune only to get these features?
I setup ADFS/WAProxy for SSO for Intune. I can still use that without ConfigMgr integration right?
On a different note, is the on-premises connector for Exchange a requirement for Intune? I have seen several tutorial for installing Intune that do not mention this step.
https://technet.microsoft.com/en-us/library/eb9618d2-dc90-48be-b921-8044b7e693ac#bkmk_EX_OPHi,
I guess the first question is really up to your company requirements and how long you can wait. as there are now communicated time of release of that feature it is hard to say if it is worth it.
Exchange connector in SCCM 2012, no, Exchnage on premise connector for Conditional Access in Intune, if you want to use that feature yes you need it but you can use Intune without it.
Yes, you can use ADFS/WAP for Intune standalone as well.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Why does the sound for my iPad lock and keys stop working
Why o the sounds for my iPad lock and keys stop working?
1. Double-click the Home button and swipe Task Bar to the right
2. Check the volume and mute settings
http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg -
When I try to log on to my bank, the bank recognizes the user id but the password the bank sees is not correct. I went through the process with a tech at the bank watching at their end. (cap lock,num lock and password carefully checked) When I switched to Chrome browser no problem logging on. This just started a few days ago. Any ideas?
Today I tried Firefox again and the bank login worked. I only had trouble with my bank recognizing the password (that I very carefully typed). Other sites such as Hotmail had no trouble recognizing my password. I worked with the bank tech guy and tried to log on with him watching at his end. I even reset the password a couple of times. What he saw was the correct user name but incorrect password. He claimed no knowledge of any such issues with the bank software. When I switched to Chrome browser I had no trouble logging in.
The problem is solved for now.
But what happened? -
hello, my friend's i pad locked and need the apple id and password to unlock the setup and open the i pad but he don't remember any one of them nor his email and security questions the serial number of tha i pad is DYT*******PH and the part number is MC979ZP/A what can we do about that please solution?
<Edited by Host>Your friend will have to remember or find his account id and password, without them he won't be able to re-activate the iPad.
Does he have any of the account's downloads in his computer's iTunes library : Recovering a forgotten iTunes Store account name.
Or has he tried finding it via http://appleid.apple.com : Apple ID: How to find your Apple ID.
If he can find the account id he can then get its password reset via http://iforgot.apple.com
(As these are user-to-user forums, you're not talking to iTunes Support nor Apple, I've asked the hosts to remove the serial number from your post.) -
Ipad locked and can't connect to itune?
i just bought my ipad2 (used and just received it. i didn't have time to sync it with any other computer), and i put a password on it, but 5 min later i couldn't remember it. i tried several passwords but they were wrong. now the ipad is locked. so i read online that i need to connect it to a computer to reset it. so i tried to connect it, but now it says that itune cannot connect to the ipad because it is locked with a code, and that i need to put the code before the ipad can be used with itune.
so anybody have any suggestion on how i can reset or unlock it?
also, i also just bought a apps (navigon for 40$), will i lose this app if i restore it without back up?
(i know that a lot of people already asked this kind of question, but i couldn't find answer where the ipad was locked and at the same time couldn't connect to itune).
tks for any suggestionGlad you got things going again
App Store>Purchased>reload your Apps for free -
Blackberry ID Login and Password forgotten
I have forgotten my email Address and Password that I originally used to log into App World and when I want to download updates Very frustrating When I attempt an update i get a screen which gives my email address ...and then asks for a password (Blackberry ID) Great! I cannot remember which password so I select forgotten password Then I am sent a link by the server, which then asks me for the password...(the one I cannot remember) so that I can change the password Fantastic! And so I go in circles until the server locks me out for two hours How do I go about getting this password changed......
Hi gilbert8484,
Welcome to BlackBerry Support Community Forums.
If you are unable to reset the password, you will need to either delete the BlackBerry ID using the confirmation email you received when creating it and recreate it or create a second BlackBerry ID.
Thanks,
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
Option to call one phone number when iPhone is locked and password protected
Dear Sir or Madam,
I have an idea which should be added to your iOS for iPhones. I think that many users would appreciate that and it could help to return a lot of lost iPhones to their owners. Even though I think that it could be used by emergency to contact the relatives in case something happen to the owner. The idea is to allow owner to define one or two numbers which could be called from the iPhone when it is locked and protected by password. Same option as it is for emergency nowadays.
Please try to consider it.
Thank you,
Yours sincerely,
Kamil Olahhttp://www.apple.com/feedback/
-
how would you lock a and password a single folder.
i looked at the serccrity file lock in prefences and it just says that it will lock the folders to everyone who isnt on your user account. i only have4 one account i only want one account i just want to password a sinle file . how would i do this?Hi Make believe,
You can make encrypted disk images, but not encrypt individual files. If you just have one file, just make an encrypted disk image that is about 10Mb and store the file in there.
Instructions are available here - http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh3.html -
IMac with lock and password!
I try to reset my administrator password because i couldn't remember the one I set up, then I follow the apple support steps to set it up, after I was done I restart my computer just like they suggested and now I have a freaking lock with password! I try few other steps and nothing is working, this is a refurbish iMac so no cd was enclosed in the box. I believe the password was from the previews owner because all the codes I would normally use doesn't work..... I need to solve this problem from home the apple store is 2 hours away! I purchase this iMac thru the apple.com so you guys can see it's my property not stolen.
You need to reinstall OS X:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
This assumes you had Lion or later installed. If the computer has Snow Leopard or earlier, then you will need the installer discs that should have come with the computer:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
IPad Usernames And Passwords...
Hi Apple and everyone else whos interested...
I would like to allow everyone in my house use my iPad without the fear that people would lookk at my mail, contacts, messages ect, ect... So why cant you make accounts on iPad? One for each member of the family... You would more than likely get more purchases because it would be more convenient... If peoplle could make User Accounts on iPad it would be so much better!
What does everyone else think??
Thanks!Just login to Amazon, Netflix and other sites in Safari. For each site after I entered the username and password, then after I pressed the "Log In" button, a pop-up message box appears:
Save This Password?
You can view and remove saved
passwords in the Passwords &
AutoFill section of Safari settings
Save Password
Never for This Website
Not Now
This pop-up message is new after the iOS 7 upgrade that just started to appearing in the last few hours. -
I forgot my iPad lock screen password
I made a new passcode lock and I forgot it
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Keyboard lock and password request
Hi,
Can anyone please help me with the following:
When taking a call my key pad is not locking and I keep putting people on hold/mute etc when talking to them. Also voice mail keeps requesting I set up voice mail when I have already done so.
Cheers
JonHi,
Keypad, When you put the phone to your ear, the proximity sensor detects you and kills the screen so you don't hit any keys while talking. It sounds like this is not happening in your case. When you pull the phone away from your face, do you see the screen light up or does it appear that it is already lit?
Is the phone in a cover? This may be effecting the sensor.
Reset the phone. Hold Home and Sleep buttons till you see the Apple logo and see if that resolves the issue.
If it still is not working you could try Restoring the phone, this will enable the OS to be reloaded onto the phone incase there is an issue preventing the sensor from working correctly.
Finally if that doesn't resolve it there may be a hardware issue with the sensor and the phone needs to be checked by Apple.
Voicemail, this is a carrier controlled feature. You could try calling your own voicemail and go into the setup area to make sure that it is set up correctly or you could call your carrier and have them check that the voicemail is set up correctly.
Hope this helps -
IPad disabled and (a) forgotten passcode; and (b) home button is broken
How can I unlock my iPad if
(a) I've forgotten passcode; and
(b) home button is broken (so the normal plug into iTunes to restore doesn't work)
I don't mind if I wipe my iPad, just need to be able to get into it.
ThanksIf the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
~~~~~~~~~~~~~~'
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Maybe you are looking for
-
Time machine only backup when i am using mac
i have a time capsule and a wd external drive connected to IMac for backups. time capsule only backs up when i am using computer or if i click the time machine icon. is this correct? i thought it would backup automatically every hour.
-
Cannot view html in email attachments
While receiving email through MS Exchange emails with html attachments when tried to view will only display as html but not as a document. I talked to an Apple Tech and they said to try to remove and reinstall the exchance client on the ipone. I don
-
'Deferred tax: Post invoice and payment separately $1
Hi A customer invoice is posted with service tax.If we go to f-04 to make an entry of payment received and Debit bank, debit TDS certificate receivable for the TDS amount deducted and click on process open items thereby selecting the customer and the
-
Hi all, (please forgive my English) Versions : Itunes : 11.0.1 (12) 64bits Mac OSX : 10.8.2 (Mountain Lion) I discovered new mp3 do appear in Itunes playlist (recently added songs playlist) but do not appear in the main song list (songs/artist/album
-
How to alter Select Query while altering selectionscreen for same output?
Hi, i have to change the selection screen fields with some new fields , but i dont know how to change the selection query accordingly, because i need the same output with the same fields but with a different set of fields in the selection screen. The