Ipad locked switch control "device not found"

I have an iPad that is locked. The message at the top says "switch control" and "device not found". Any idea how to access the ipad? It is not responding to the switch at all.

That sounds like there was an assistive device associated to the ipad at one time and is currently not connected.
Is there a small graybox with dark circle in it on the screen? If yes, Slect it, it will be the Assistive touch control.
again, this is a guess on my part.

Similar Messages

Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both devices are connected ?

Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both devices are connected ?

That does not involve iPhoto for the Mac in any way - try the iPad forum
I will request your post be moved
LN

[SOLVED] Device not found and kernel panic

Hi,
I'm having an issue with the kernel. I get this weird error while booting:
Booting the kernel.
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
ERROR: device '' not found. Skipping fsck.
ERROR: Unable to find root device ''.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[rootfs /]# _
I don't have the slightest idea what to type in that shell, so I exit (^D) and get an error with its shell, another one and finally a kernel panic. Do I have to report the other two error as well? I think this might be related to a recent change in my syslinux.cfg. I wanted to add hibernation cabability to my arch, so I added "resume=/dev/sda2" (my swap) to kernel options. It should not yield such a result though. As a matter of fact, I get it even if I remove that parameter at runtime. For now, I managed to boot with Fallback Initramfs.
Here is syslinux.cfg, as well:
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
# Comboot modules:
# * menu.c32 - provides a text menu
# * vesamenu.c32 - provides a graphical menu
# * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
# * hdt.c32 - hardware detection tool
# * reboot.c32 - reboots the system
# * poweroff.com - shutdown the system
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples
DEFAULT arch
PROMPT 1 # Set to 1 if you always want to display the boot: prompt
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl
# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
UI menu.c32
#UI vesamenu.c32
# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border 30;44 #40ffffff #a0000000 std
MENU COLOR title 1;36;44 #9033ccff #a0000000 std
MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel 37;44 #50ffffff #a0000000 std
MENU COLOR help 37;40 #c0ffffff #a0000000 std
MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07 37;40 #90ffffff #a0000000 std
MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
# boot sections follow
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/disk/by-uuid/dc891acc-9ff7-4d95-bba4-bc2e502301e7 ro
APPEND resume=/dev/sda2
INITRD ../initramfs-linux.img
# (1) Arch Linux Fallback
LABEL archfallback
MENU LABEL Arch Linux Fallback
LINUX ../vmlinuz-linux
APPEND root=/dev/disk/by-uuid/dc891acc-9ff7-4d95-bba4-bc2e502301e7 ro
INITRD ../initramfs-linux-fallback.img
# (2) Windows
#LABEL windows
#COM32 chain.c32
#APPEND hd0 0
LABEL hdt
MENU LABEL HDT (Hardware Detection Tool)
COM32 hdt.c32
LABEL reboot
MENU LABEL Reboot
COM32 reboot.c32
LABEL off
MENU LABEL Power Off
COMBOOT poweroff.com
Any ideas?
Thank you,
rubik
Last edited by rubik (2012-07-22 10:03:59)

Also, don't use "root=/dev/disk/by-uuid/...", that's just wrong. Udev kicks in after the bootloader phase.
https://wiki.archlinux.org/index.php/Sy … nux_Config
Here's mine:
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=UUID=978e3e81-8048-4ae1-8a06-aa727458e8ff ro quiet vga=current
INITRD ../initramfs-linux.img
And don't forget to mark it as solved.

HP Officejet 4635 Scan Software says Device Not Found

I just successfully installed my new HP Officejet 4635 and can operate it wirelessly. I am able to print and I can scan if I use the buttons on the device itself to tell it to scan. However, when I try to load the HP software, it says "Device Not Found". I tried using the HP Scan and Print Doc and it says everything is fine, but I still cannot load the HP Scan software. I need to be able to scan multiple pages into one file, and I cannot do this by using the control panel that is on the device itself. Anyone else have this problem?

Hello lookinforhelp, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help, but I do need a little information first. I am linking a couple of HP Support documents below that will show you how to find which operating system you are using. Also, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

In-built Audio device not found

Hi Guys,
My macbook pro suddenly finds no audio device inbuilt. And i can play no sound nor hear start up sound when switching on mac.
I get a 'no parking' like symbol beneath my audio options.
I've tried rebooting in safe mode, Resetting PRAM, Repairing permissions in disk utilities, use my ipod touch headsets, headphones.. NOthing worked.
And i'm feeling deaf whenever using Mac now.
Is there anyway to get the audio back ?
Thanks,
Raesh

Hmm.. Okay. Would give it a last try.
And I have a couple question before doing that..
1. I did the hardware test and It gave me this error .. " 4SNS/1/C0000008 :TPCD--24 "
But When i looked up for this error, it tells me a sensor problem. Not as Audio device problem. Do you think this hardware error of 'sensor' has something to do with audio ?
2. So in-built speaker isn't working, plugging in headphones cable isn't working. But i was wondering whether a bluetooth speaker would be recoganised in the system preferences > audio output device ? Will it work ?
Because i keep on reading that an " in-built audio device not found " problem is a huge one and it costs a lot to repair. They often provide solution of changing the whole logic board (Keeping fingers crossed). And with my warranty period over, I don't wish to go through that path. So want to know if external bluetooth speaker has a chance to get recoganised as an audio device, Then I would buy JBL bluetooth speakers. It seems good and less pricey than changing the whole logic board.
Let me know which way i can go, Thanks in Advance Man.
// Raesh.S

Time capsule device not found

I have a recurring problem backup failed and device not found.
I have been on to apple told pull the plug on time capsule every time.
now i am told to go into network and take it of automatic and set it to 2.4 to channel 11 and the 5 to channel 44.
is this now limiting the time capsule to the 2 channels.
is this the best result for the time capsule or would i be better getting a non apple product.

the phone has been switched of and unplugged
just checked my Time Machine and its missed backups again.
I go into airport utility yet again its missing the time capsule.
I am sorry, but Yosemite is doing its thing.
So much for Apple blaming my cordless phone.
Apple has to find something to blame, since they will never blame themselves.
have a program from the app store wifi checker.
running it looking at the wifi signal in my area I have 2 main accounts with 2 different BSSID the last letter different on each.
I also had for a bit 3 guest accounts 2 with the same BSSID and 1 different BSSID there is another wifi account not mine with the same BSSID as this 1.
This all sounds normal.
I am afraid that all you can do is wait for the next Yosemite update to see if it will fix some of these issues.

IPad 2 switched off and not charging after iOS 7.1 update

iPad 2 switched off and not charging after iOS 7.1 update. Pls help me. I have tested my charger. Its working in another device. But my iPad 2 is not charging with other adapters too. What to do??

Hello, 92.romil.
Thank you for visiting Apple Support Communities.
I would make sure you are using an Apple branded cable with your iPad. If you are, the troubleshooting steps in the article below may help. The steps listed below for the iPhone and iPod still apply to your iPad.
Resolving issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Cheers,
Jason H.

BIOS not installed? Devices not Found?

Pentium 4 3.0GHZ
Kingston 2x512 Dual channel
420 Watt power supply
80 Gig maxtor Hardrive
When the system boot up I get a message stating:
Devices not found
BIOS not installed
I have no problem getting into the BIOS settings and making changes except the ratio for the CPU is Locked which I also can seem to unlock.
Other then that my system runs fine and Windows XP work.
I know the system is running at 200x15 because the Core Center.
Any ideas about the BIOS or the LOCKED issue.

itve told you in the bios section allready

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

T410 bluetooth device NOT FOUND

Hello Everyone,
I have a t410, product id is 2539AJ6 (bluetooth included), running Windows 8.
however i can't get bluetooth to work, in addition it seems like there is no trace for a bluetooth device on this computer:
- Can't install driver ("Device not found").
- Not Recognized by Windows 8.
- on BIOS, Security -> I/O Port blah blah -> no mention of bluetooth settings there.
where do i go from here? anybody ever encountered such an issue with bluetooth?
btw, im pretty sure there is a bluetooth device on this laptop.
appreciate any help

Here's the Link for the 2539-AJ6, it does indicate that you have Bluetooth. Dowload and install the latest drivers.
http://support.lenovo.com/en_US/downloads/default.page?

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Photosmart 7515 connect via USB but not wireless, Device not found on Network

Purchased a 7515 all-in-one, was able to setup wirelessly to MacPro but has lost ability to connect wirelessly. This happened with OS X Lion and nor MountainLion. Have a TimeMachine Airport. Printer connects to network but during setup from MacPro, repeatedly get "Device Not Found on Network" after stepping through wireless installation setup screens. I have reset router, printer, firmware updates, software updates.... at wits end. I have followed the instructions on the below resource page link with no luck. Use WPA-PSK encryption (Automatic AES or TKIP) on network and diagnostics on printer pass.
Please help anyone!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02946597&tmp_task=solveCategory&cc=us&dlc=en&la...

It sounds like the Macs and the printer just aren't communicating.
If you press the network icon on the printer, does it indicate it is connected to the network?
I recommend two additional steps that are not listed in the linked document. The printing system of the Mac may need to be reset as it will clear any software that could be interfering (such as corrupted installations).
Follow the steps as outlined for 10.7 or 10.8 in this document from HP.
The next step is to install the driver package from Apple. This can be found here.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I'm receiving error Boot Device Not Found and Hard disk not exist when I boot up my laptop

I'm receicing the error Boot Device Not Found when i power on my HP G60-235DX laptop. After following HP's recommended troubleshooting steps, I receive error Hard disk not exist. Hmmmm....that's a little concerning. My guess is I need a new hard drive? I have the 17 recovery disks I made when I setup this laptop, however I'm not sure if they will resolve this issue. Any suggestions?

One of 3 things has happened, listed from most likely to least likely
1. Hard drive has died, replace it with one of the same size or larger, then use the HP recovery discs to re-install windows.
2, The motherboard has serious problems. (Replace the notebook)
3. The hard drive cable that connects it to the motherboard has somehow failed, not very likely. (replace the cable)
Replace the hard drive with a new one and use your recovery discs to get Windows back on it.
Here is your service manual, will show you how to replace the hard drive
http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
Recovery Instructions for Vista
Recovery Instructions for Windows 7

Presario CQ61 - Boot Device not found, Hard dis not exist

Hi i bought my presario CQ61-405AX 2nd hand roughly a year ago and it was almost new, my laptop was running fine, and then it froze, and so i had to turn it off, after i waited 30min for it to unfreeze, it now, when i boot it up, appears with a black screen, with the error
"Boot Device Not Found
Pleae install a operating system on your hard disk
F2 system diagnostiscs"
I went onto hp support and followed the prompts until it did a hard disk test and the error, "Hard Disk Not Exist" appeared
I have no idea how to fix it, i am running Windows 7 home premium, and i fear i may have to buy another hard drive
Thank's in advance
This question was solved.
View Solution.

Hi,
The most likely explanation is that your Hard Drive has failed and will need to be replaced, however as a further test, try the following.
1. Create a bootable Ubuntu CD - a guide on creating an Ubuntu CD and the download can be found Here.
2. When created, follow the guide on the link below to Try Ubuntu.
http://www.ubuntu.com/download/help/try-ubuntu-before-you-install
The 'Try Ubuntu' option runs the OS from the CD without the need to install on your HDD. If this runs Ok ( it will be slow running from a CD ), this would tend to confirm that the problem is with the HDD.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Boot device not found. "Hard disk not exist". windows not booting

Product: HP G72-110SA
OS: Win7
two days ago, I was installing updates on my computer and when it was about to restart, it froze. After waiting for 10 minutes, I had to turn it off by pressing the off button. From then on, the computer turns on but shows a message "Boot device not found".
I have tried all the BIOS tests that I could find on the net for the hard disk, eg: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443465&tmp_task=solveCategory&cc=uk&dlc=en&la...
This gives me a "Hard disk not exist" error. I tried resetting the BIOS, that didn't work. I tried taking out and putting back in the battery, the memory and the hard disk. Still no luck.
I then booted ubuntu from cd on the computer. It works just fine, including the internet etc EXCEPT the HDD is still not detected.
I had some pretty important stuff and no back up, so would appreciate if someone can help me get back the data. If not, even if I know its just a HDD failure and not a motherboard/BIOS problem, it will be a relief as its probably fixable.
Thanks

Hi there ,
Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I would be happy to assist you. As there are many models of HP Notebooks, I would need the model number. (How Do I Find My Model Number or Product Number?) When I went to www.hp.com/go/techcenter/startup, it gave me documentation and troubleshooting steps to follow. One of the documents it provided is called Hard Disk Error Displays before the Computer Starts. NOTE: I recommend at this point you make an immediate backup of all important data and files. Here are instructions on how to Backing Up Your Files (Windows 8). Please follow the troubleshooting steps provided, re-post with the results of the troubleshooting in detail. Thank you.

Ipad locked switch control "device not found"

Similar Messages

Maybe you are looking for