IPad Mic Output

Is there an app for Mic Output to speaker on iPad?
I have to give a speech to a small size audience and would like to use external mic and wireless speaker with iPad instead of MacBook Air. I could not find any ans here or on Goolgle.
Thanks.

To clarify , Garageband has an input volume meter with a needle that goes in the red if it's too loud.
I tested the ipad against the ipodtouch and I got a much stronger signal from the ipodtouch. It went  into the red if I got loud. The ipad will not go into the red no matter how much I yell.
It definitely has a lower input level then the ipodtouch.

Similar Messages

  • IPad audio  output is not working properly, except on Siri. Any ideas on what is wrong and how to fix it?

    iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't.  Any ideas on what is wrong with it and how to fix it?
    my iPad is a 3rd gen, 16GB wifi only model, if that helps
    I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!

    Godly19 wrote:
    iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
    iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
    The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't.  Any ideas on what is wrong with it and how to fix it?
    The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
    I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
    And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

  • Mic output very

    Using a Sound Blaster X-fi (SB0790), I have very low Mic output. Using Ventrilo, when I try to increase the output volume a pop-up says to use the " +20db Boost" but looking in the "Sounds and Audio Devices" I do not see a way to do that, the "Advanced" setup for the mic is gryed ou.
    Bottom line, its not my Mic tahts the problem, so how I get the Mic output to be stronger so that Im heard on Ventilo (or any other chat program).
    Whats with this card?
    Tnanks,
    Macpeteo

    The problem with a noisy mike isn't going to be in the software.  It is a hardware problem.  Possibly the wiring, grounding, shielding, cross-talk from other wires picking up interference.

  • Ipad Mic

    My iPad mic will not work. How can I fix it?

    You are aware that Skype has been going up and down like a yoyo for the last couple of days.
    Allan

  • Ipad Mic is weak with Garageband

    My Ipad Mic is weak with Garageband. Does anybody know if there is a input leval for the built in microphone?
    thank you

    To clarify , Garageband has an input volume meter with a needle that goes in the red if it's too loud.
    I tested the ipad against the ipodtouch and I got a much stronger signal from the ipodtouch. It went  into the red if I got loud. The ipad will not go into the red no matter how much I yell.
    It definitely has a lower input level then the ipodtouch.

  • Low mic output, can't figure it out at all!

    Recently, I tried to find a portable solution just for fun. In the studio, we have a proper mixing desk, amps, pre-amps and the lot. But I'm going away for a few months and I needed to be able to work on the go… That said…
    I got myself some candy. At first I thought it would be cheap… I was wrong.
    It's costing me because I keep buying new things to try and fix the issue!
    I got a nice shure condensor mic and the Behringer Tube Ultragain pre-amp.
    To input the sound into the MacBook Pro, I also got Behringer Firewire FCA202.
    For those not familiar with these, the FCA202 has 2 ins / 2 outs, 1/4 inch, no pre-amp. The Tube Ultragain offers up to 60dB of gain, +48 V, 20dB PAD, a phase reverse and limiter.
    First observation is how the Tube Ultragain indicates proper volume, in fact, when all knobs are all the way up, a simple hush in the mic send the volume indicator to clip. Still, nothing through Logic. I can see a bar, but barely a sound.
    I tried to plug my headphones in the back of the Tube Uktragain and it's quite loud. So why won't it work?
    Then, I decided it was the Tube Ultragain. I thought I'd get extra gain by buying another audio interface that could be portable. I chose the Line6 Toneport X1. I plug the XLR from the mic to the XLR input of the Tube Ultragain, crank up all the knobs. I output to the Line 6 through the mic input, cranking the gain as well. Still nothing.
    I decided to get a different mic. I got the ribbon Superlux R102. I read great reviews. Any setup combination with any of my devices resulted still in very very very very low output.
    Considering that I have a few mics, what should I get that will work or what am I doing wrong with what I've got?
    The thing is, all these devices work great with guitars. It all points to not enough juice for the mics but seriously, shouldn't the Tube Ultragain do the trick?
    Help???

    Hello Unconscious2015,
    Thanks for using Apple Support Communities.
    If you are trying to configure your Mac to use SMS continuity with your iPhone, then please follow the directions below to configure SMS Continuity.
    To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
    Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
    Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
    On your iPhone:
    Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
    Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
    Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Take care,
    Alex H.

  • Can I force the A/V adapter for IPad to output a certain orientation?

    I got the A/V Adapter for my iPad 2 and all is well except there's an app I need to demonstrate that 'technically' runs in portrait mode, although you use the app in landscape.
    Much to my dismay, the output auto-rotates and the app appears on its side on my television. I am hoping that there's a way to 'lock' the output to landscape mode, although I fear the worst.
    Does anyone have any information on this subject?
    Thanks,
    Nick

    Thank you for your advice. I appreciate it.
    According to this page on the Apple website, you can save up to $30 on an iPad with education pricing - http://store.apple.com/us/browse/campaigns/back_to_school
    With that, and the lower prices of iPad air in the US, I'll be saving $130 on a 16 GB Wi-Fi model if I bought it in the US than I would in India. Considering that Apple is a very reliable company and that I get sufficient time to use the iPad in the US to learn about any defects (if any) in it, I think I can take the risk of the Indian Apple store not honoring the warranty. Even if the product shows some defect in India, I can use the $130 which I would have saved to get it repaired.
    Any views regarding this?

  • IPad VGA Output

    Hello @all,
    is there a way to enable the VGA output over the iPad VGA adapter?
    Greetings

    Only way I know is to take a screenshot (home+sleep) and import the image into Keynote.

  • Ipad Mic problem Skype

    Mic isn!t working. Skype test call doesn't,t record my voice. Is there something in Settings I can check? Is there something in Skype on the iPad that I can check?

    You are aware that Skype has been going up and down like a yoyo for the last couple of days.
    Allan

  • Flatten two audio cords (mic output) into an Apple port.

    Anyone know of an adapter where you can stick the two wires from standard headsets into one side, and plug it into an apple input/output port (designed for "iPhone Headset"
    Thanks in advance.

    Yes, I've seen those, but I was asking simply of curiosity because it would just be cooler to connect it right through the jack. Also, I just realized, a USB adapter wouldn't help iPhone, iPad, and iPod users, as there is not a standard USB port. But thanks.

  • IPad mic not working

    I am using an iPad 2 3G, and the microphone seems to have stopped working. I have tried vaccuming/airblowing the mic, but it still will not work. I purchased an external mic that plugs into the headset jack, but it is useless when using Facetime as the iPad thinks there are headphones plugged in and the speaker does not work. I would like to able to Facetime using the speaker. Is there any way to get the regular mic working again, and/or an external mic that will allow me to use Facetime with the speaker?

    We have upgraded our two iPad 2s to iOS 7. One is a 3G model and that just had static when recording video. Being iPad 2 if it was hardware it's out of warranty or an iOS7 software problem.
    I would suggest you switch off and try the vacuum cleaner again - it worked for us :)

  • HT4108 iPad HDMI output to recorder, HDCP message, not protected content

    Im am trying to eport some work productsI have created in an app in my iPad 2, a combination of text, sound and video. The video is of my own making, not copy protected. The developer of the app is not using HDCP either. Any ideas how to output non-protected material to a video capture card?

    What exactly does this have to do with iPhones?

  • Send IPAD music output to PC wireless

    Hi,
    I would like to send the IPAD music directly to the PC in any wireless way possible; like rerouting anything that would usually be sent to the IPAD speakers but instead to the PC as an input signal. There will be no wires from the IPAD to the PC.
    Basically, the IPAD would simply be the music signal output which could be the IPAD libray, the DLNA server which the IPAD is connected to or iTunes. The way the music can then be spread from my PC is infinite because the PC is connected to send the music output to a mixer. The mixer is set to spread music to 7 zones and the IPAD can already control any of the mixer's output and volume. So you get the idea, the IPAD would be the music source and will also set the volume and zone to anywhere in the house as long as the PC is running.
    Any idea how I can send the IPAD music signal to the PC remotely and permanently?
    Thanks,
    Bob

    Hi again,
    I am trying to setup IPAD airplay with Windows Airfoil, but no luck so far.
    I have no other AIRPLAY device in my network.
    PC is connected to network physically, not WIFI.
    I have no other Apple devices but IPAD 2
    Router is latest firmware
    Rebooted router, windows, IPAD
    IPAD is latest IOS
    Whatever I do, or read on the subject, I cant see the AIRPLAY icon on the ipad. Airfoil also do not see the IPAD, if it should.
    The reason I do not see airplay, is it becaause I have no other native airplay devices? Or is it because PC is connected physically and not WIFI?
    Thanks all for you help.
    Bob

  • Mic Output Iss

    I'm currently using an Audigy 2 ZS on Vista Business 64-bit. Everything that I say into the microphone comes out of the speakers. I have tried turning off line in and other settings. I tried changing bit rates as if that would have any difference anyway. I've even tried running the mic through line in or other inputs.
    I'm currently using a 5. Creative sound system so I didn't have to do anything special with the three sound inputs. Why am I able to hear myself talk? Can this be fixed?

    Bump.
    According to the Creative AWE64 documentation:
    <i>
    The digital audio signals from the SPDIF Out jack contain audio output from the EMU8000 wavetable chip mixed with digital voice playback if the playback is in 6-bit stereo mode, 44. kHz CD quality. If you want to listen to WaveSynth/WG through the SPDIF Out jack, you must enable the ?Enable WaveSynth to play at CD quality? feature. To do so:
    . Start Creative WaveSynth-Waveguide. The WaveSynth/WG properties sheet appears, displaying the Profile tab.
    2. Click the Performance Settings button.
    3. In the Settings dialog box, select the Enable WaveSynth To Play At CD Quality check box and click the OK button.
    4. In the WaveSynth/WG properties sheet, click the Quit button to close it.
    </i>
    Now I am running Windows XP and it seems that the WaveSynth software is incompatable with this OS (not that I've ever used it before or really know what it is). Is there another way to force the card to output all sounds at 6-bit stereo 44.KHz?

  • IPad mic problems

    Hi
    My iPad has some kind of mic issue.
    I have called friends using Skype and Facetime and I can hear them fine but they cant hear me.  All they hear is a crackly / windy noise.
    To test the mic I have used earphones with mic.  The same problem occurs.
    Does anyone have any ideas?

    Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

Maybe you are looking for