Ipad mini dispay black line on bottom of screen

ipad mini has blacyk lines on bottom of the screen

Try to reset it. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and see if that helps. Regardless you should make an appointment at your local apple store and have them check it out, especially if it's still under warranty.

Similar Messages

  • My ipad mini is cracked in the bottom left corner of the screen and their is a thick black line with smaller coloured lines within it, is their anything I can do to fix it?

    My ipad mini is cracked in the bottom left corner of the screen and their is a thick black line with smaller coloured lines within it, is their anything I can do to fix it?

    Does this only happen on specific pages?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can try to disable notifications as a test (you may want to reverse this).
    You can try to set the dom.webnotifications.enabled pref to false on the <b>about:config</b> page.
    *http://kb.mozillazine.org/about:config

  • On the screen of my ipad appaers a black line? what can i do

    i need helpmy ipad has a black line on the screen

    apple has been known to replace cracked glass under applecare/warranty so you should try that approach. set up an appointment with a genius, go down to your apple store, and see if they will swap it.
    try begging
    bring pictures of your kids or your pets to play the sympathy angle
    good luck
    ps i have replaced my ipad 2 three times and every time it was free
    the first time it was for screen bleeding
    the replacement still had some screen bleed
    something fell on it and the glass was cracked, it was a spiderweb like 1 to 2 " in circumfrance so i begged and they swapped it for free
    the third one had some screen bleeding and it showed signs of the adheisive peeling from the case so they replaced it the third time
    don't lie to the genius over the circumstances of what happened to the ipad 2 they like people who are honest

  • The screen on my ipad mini went black and it won't turn back on. how can this be fixed?

    The screen on my ipad mini went black, and now it isn't responding or turning on at all.  What can I do?

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Solid black line on HP tablet screen

    I just got this HP stream 7 5709. So far so good except there is a horizontal black line just across the screen. I first thought it is the screen protector, but now I begin to think it is in the display itself. Is this known?Attached the image here. Thanks
    This question was solved.
    View Solution.

    invalid image link.
    any kind of lines on the screen that persist all the time are defective LCDs and will need a replacement. 

  • On my wife's iPad mini I can't get past the screens accepting the software license to upgrade over WiFi

    On my wife's iPad mini I can't get past the screens accepting the software license to upgrade iOS over WiFi.
    Works if I do it over iTunes on my desktop.
    I get the screens to agree to the software license (twice) then it sits there until I get impatient. like 30-60 seconds. Have tried a hard boot but have to connect it to the computer each time. Latest was when I upgraded to 8.2

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • Hi i had my ipad mini on the windowsill and the touch screen is not working or the button on the screen and the screen is coming away is there anything i can do

    hi i had my ipad mini on the windowsill and the touch screen is not working or the button on the screen and the screen is coming away is there anything i can do will apple take it back

    pvonk wrote:
    Apple does not replace or take back devices that are damaged.
    Depends on the damage. The battery came loose in my iPhone. When Apple opened the phone to redo the glue they discovered the speakers were also loose. Apple replaced the phone.
    If the glue was properly bonded or had some other flaw Apple will replace the device if the device is still under warranty.

  • Ipad mini cycles from apple logo to start screen and wont stop

    Ipad mini cycles from apple logo to start screen and wont stop. Will not shutdown. Cycles every 5-8 seconds. Thanks!

    I'm having the same problem.  Since it's the same problem, I thought I'd pigtail on this thread, rather than clutter up the forum with a duplicate.  I can start a new thread if this is not appropriate.
    I have tried a reset, using the sleep/wake and home buttons, with no success.  I have also restored to factory settings, then restored to backup.  It's still rebooting itself.
    iPad Mini wifi (not Retina).  iOS 7.1.1.
    This problem started today.  I updated to 7.1.1 soon after the update was released.

  • Why is the unlock-screen of my iPad mini showing black or blue lines?

    3 days ago, i bought an iPad mini at the apple store. Everything is working perfectly, but ever since I first started it, I'm noticing some black or blue lines at the bottom of the screeen on the unlock screen. They disappear after one second.
    I already updated to the latest version, and I did a hard-reset, but this didn't help.
    Does anyone know how to solve this?

    HI i have the same issue with my ipad mini retina. it appeared too out of nowhere after  more than a month of using it.  my device wasn't dropped or exposed to any liquid substance. At first only a single line appeared and then it grew to this. How did you fix yours? did you return it?

  • TS3274 I have a new iPad mini w/retina display.  Recently, the screen flickered with red lines across the entire screen.  Anyway, the screen eventually went black. Now it does't work.  Anyone have any suggestions?

    My screen just went haywire.  The screen flickered with red strips vertically.  I thought it was part of the game I was operating until the screen went black and a white strip illiminated at the top.  I tried turning teh system off, but it would not allow me to turn it off.  After about 5 minutes, I was able to turn it off.  Anyone have this occur?  The Ipad mini appears to be ok now.

    I Also have this problem!!
    In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason.  At first I thought the screen was dead, but discovered the heat solution by accident.  Now I turn it on and keep it from going to sleep until I go to bed.  Thank goodness the battery is still awesome on this thing.
    I bought it new and still has the original screen, I keep it at home (never below 62 degrees).  Coincidentally, this happened a day or two after the expiration of the warranty!!  Any help figuring this one out would be eternally appreciated.
    iPad mini retina Wi-Fi, iOS 8.1.3

  • What do you do if you have a thick black line going through your screen of your ipad mini ?

    We have seen how much it would be to take it to the apple store and repair it and that would be £156 . Is there another way to fix it by ourselves ?!

    There are manuals here: https://www.ifixit.com/
    However, doing  this repair by yourself will void any sort of warranty that might be left on your iPad Mini.

  • Problems with my Ipad Mini Freezing/black screen/power off randomly

    So I got my Ipad Mini about 3 weeks ago, maybe a little longer. I have had the first gen Ipad since it came out and never really had a problem with it. I wanted to the Ipad mini for a long time cause my buddies have it and I have loved it ever since I saw one. I finally got one and it worked great for the first week. I got home and installed all my apps. The usual, Spotify, Skype, Drafts, Sirius XM radio, and some other note-taking and organizational apps. Then everything was going well for the next week and a half just fine. I was listening to Sirius XM Radio on the app and my Ipad died. I looked at the screen and pressed the middle button to try to get the radio to turn back on but it didn't. I tried soft reseting it which didn't work and then I finally hard reset it. That worked, and made me a little nervous, but I thought maybe it was just the app. So I went home and uninstalled it and then re-installed it. Fast forward about another week and a half and I have been having the random shut downs every once in a while and just today I opened the skype App and everything just froze. I got a blue screen just like the Blue Screen of Death that a PC would get, the only difference was there was no error code on the blue screen. It was jsut a solid blue screen. I did a hard reset again and then tried to open another one of my note taking apps because I had pretty important stuff on it. I wanted to copy it down but before I could the Ipad completely froze up again. I hard reset it again and now it won't even get past the black screen with the silver apple logo in the middle.
    Is anyone else having this problem? is there any way to fix it? Does anyone have any idea why my Ipad mini is acting like this? I mean this is kind of ridiculous. I am extremely frustrated and dissapointed with how my Ipad mini is performing.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Thin horizontal black line at BOTTOM of page when scan on HP Officejet Pro 8600 Plus

    I owned an HP Officejet Pro 8500 and scanning was perfect.  I recently purchased an HP Officejet Pro 8600 Plus.
    When I scan from the HP 8600 auto document feeder, I get a thin (several pixel wide) black line along the bottom edge of the resulting scan.  This line will sometimes be slighly crooked or only appear across half the page, in which case it tends to get thicker toward the edge of the page).  I believe this line is an artifact from scanning the very bottom edge of the oroginal document.  I think it is showing where the bottom edge of the page was when scanned.  If the document is a little skewed, then the black line at the bottom will be a little crooked, probably following the edge of the page.  This problem is consistent, and repeatable.  It happens in both "Scan To E-mail" mode and "Scan To Network Folder" mode.
    When I scan from the flat bed, I get a very narrow black line along the very top edge of the resulting scan, but the bottom appears fine (although I've not tested this extensively).
    These thin black lines did not occur when scanning from the HP 8500.
    I am wondering if there is a setting to adjust this, or if it is a firmware difference between printers that needs debugging.
    This question was solved.
    View Solution.

    I find it interesting that the issue happens across both printers.  This is what leads me to believe this is something with the software/connection with the PC.  One thing I will note is that you mentioned above using Adobe Reader 10.1.6.  The latest version of Adobe Reader is 11.0.02.  I would advise removing your current version of Adobe Reader and install the latest version. 
    I am not sure if this will fix the issue as you mentioned the line comes across in jpeg and other scanning styles.  Do you possibly have another PC you could try setting up a connection with quickly and attempting a scan?  This would be another way to ensure if the issue is coming from the printer or a connection/software issue.
    I would like to make sure the issue is coming from the scanners on these printers before returning the printers as I would hate for you to get another model printer and the issue remain with this printer as well.  However, I will note that the Laserjet Pro 200 is a nice series printer from my experience.  I have used the Laserjet Pro 200 black and white only edition, the MFP, and the TopShot edition where I am located.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • ADF Scan black line at bottom

    Hi
    When i scan documents using the ADF  I get a black line at the bottom of each page (only the right side of the paper). I have tried cleaning the small scan area - but I still get the black line - any idea how to get rid of it?
     You can download an example scan og blank pages here:  https://files.secureserver.net/0s4RbMeFgHa3lX

    Hi PESDK,
    Thank you for your response! I would recommend the following in this order:
    Uninstall the software. Uninstalling the Printer Software.
    Clean boot the computer. How to perform a clean boot in Windows.
    Disable any antivirus programs. Disable antivirus software.
    Disable any firewall programs. Windows Firewall from start to finish.
    Create a new user account. Managing User Accounts and Logins (Windows 8).
    Reinstall using the HP Printer Install Wizard for Windows.
    Let's see what happens after these steps are completed!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • 5800 express solid black line across bottom of dis...

    hi everyone
    please can someone help me
    i have a nokia 5800 which up until now has been great.
    however i noticed recently that at the bottom of my screen there is a thin solid black line which goes from end to end
    so much so it even crosses out the word 'options' and 'exit' - since its solid and black
    i dont know why its doing this as it has never happened before
    i am using the latest firmware V20.0.012
    why is this black line there? why wont it go away?
    i have tried everything from removing the battery to resetting to settings to default to changing my themes and wallpapers
    nothing seems to remove it
    its always there
    even on the nokia shut down and start up screens it is clearly visible
    please help. any suggestions would be most appreciated
    Message Edited by coolj0800 on 22-Jun-2009 01:58 PM

    guys
    would you believe that when i remove my memory card the solid line dissapears and the display is perfect!
    but now when i put the memory card back in and switch on the phone, there is no boot up ie i have my white screen with NOKIA and then it just switches off- no matter how many times i try the same thing happens
    but when i take the memory card outand switch the phone on again, the phone boots up perfectly
    what is going on? is the memory card corrupt? i have only used 500mb out of 8 gigs and the phone is only a few months old. what must i do? should i try formatting the card? or put in a warranty claim for a new memory card as this BS?
    thanks again for your advice
    regards
    coolj

Maybe you are looking for