Ipad mini is not recognized by iTunes 11 on Mac with 10.6.8
I want to synch music in iTunes that was ripped from CDs to an ipad mini but when I connect the ipad shows in devices but is grey and at that point iTunes is frozen, iPhoto opens and the pics on the mini are displayed so the mini is being recognized as a camera, I close iPhoto and iTunes works if I disconnect the mini, I did the trouble shooting, updates and reboot of both Mac and mini, what else can I try?
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom
Similar Messages
-
Ipod, Ipad and Ipad mini isn't recognized in itunes
My two Ipods, ipad, and my ipad mini isn't recognized in itunes anymore....please help.
iOS: Device not recognized in iTunes for Mac OS X
-
IPad 3 is not recognized by iTunes
iPad 3 is not recognized by iTunes
I have gone through the Apple support website which has instructed me to do many things like try different USB ports to unstall and update iTunes, even install updated drivers. However, nothing has work up to this point. The advice that I am looking for now is (1) am I missing something obvious here? (2) Do I need to send it in for repair or something?
ThanksWindows
http://support.apple.com/kb/TS1538
Mac
http://support.apple.com/kb/TS1591 -
My Ipad Mini is not syncing wth itunes
My Ipad Mini is not syncing wth itunes on my hp envy 6 ultrabook running windows 8 os... i ran the diagnostic test and it says"No ipad , iphone , ipod device found"... help me and yeah i have tried all the troubleshooting steps on the apple website ...
HELPHello, flippytippi.
Thank you for visiting Apple Support Communities.
I would need a little more information regarding what exactly you are experiencing when attempting to sync photos to better assist you. However, here is a troubleshooting article that I would recommend going through.
iTunes: Unable to sync photos
http://support.apple.com/kb/TS3697
Cheers,
Jason H. -
My iphone not recognized in iTunes for Mac OS X
Hi,
I try to conect my Iphone to itune and I change diffrent USB port, restart my computer and Iphone but still not recognized in iTunes for Mac OS X.
appreciate your help. thanksTry working through the steps in this troubleshooting document, starting with the iPhone troubleshooting assistant: http://support.apple.com/kb/TS1591.
-
Why iPhone 4s and iPad 2 mini are not recognized by iTune.
I have and iPhone 4s and a iPad 2 mini who have been upgraded to iOS 7.1.1 both and now that i want to sync them to my computer who is running windows 7 premium family edition, they are not recognized. I get this when i plug in my phone or pad ( this iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes). I have done that twice and nothing is happening getting frustrated please help....
See the troubleshooting tips in:iOS: Device not recognized in iTunes for Windows
Also see:Troubleshooting issues with iTunes for Windows updates -
The kids have 3 new iPad minis for Xmas, but our Mac will not recognize the devices when we connect the minis to it. The Mac/iPad says it needs a newer version of iTunes, but the Mac says that it has the latest version of iTunes. The kids can't transfer their music, books, photos, etc from the Mac, where everything is centrally stored, to their new minis. :(. Can any one help?
What itunes version do you have?
What Mac OS version do you have?
From the ipad mini box and web page:
Apple ID (required for some features)
Internet access6
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 2 or later
Download iTunes at "www.itunes.com/download -
Ipad mini does not appear in itunes
Hi,
I have an iPad mini and when i connect it to my mac and itunes it does not appear? I have an iPad 2 which works fine along with several iPods. My mac is running SL still 10.6.8 and iTunes is updated to 11.0.1.
Any thoughts would be appreciated.
Thank you.dodgy lead, so its sorted
-
My iPad mini will not connect to iTunes
Hello I have an iPad mini with current 7.0.2 iOS but now I cannot connect to either App Store or iTunes. When I try it just says cannot connect to iTunes. I know it's not my account since I run the same one on my iPhone and it's fine and operating normally.
Used iTunes to download 6.1.2 to the iPad Mini. It then worked for (app store and all) for 3 hours. Then wifi stopped working at all. Hurray!
-
Not recognized by iTunes or Windows with 3 Orange blinks
I got the iPod shuffle(2nd generation) in Feb. It had been working fine - I've updated and used it several times. Then one day while I was listening to it, it stopped working. I went home a put it on the dock and my windows or iTunes didn't recognize it. I also am getting three continuous orange blinks. I've tried a few things, but I don't know how to get it to work if my computer isn't even recognizing it? PLEASE HELP!
If the iPod is not recognized by the computer or iTunes, try using the iPod Reset Utility.
http://support.apple.com/kb/HT1238
If that does not restore the iPod and it's less than one year old, you can get it replaced under warranty. -
My Iphone 4 only charges when is switched off and it's not recognized by Itunes and Mac
Hello guys!! Please help me if someone knows what should I do. My iphone was working perfectly so far but a couple of days ago it stopped charging, its not charging neither with the a/c adapter and with the usb through my pc. It says device not recognized.. Today I had my iphone switched off and tried to see if it was charging and actually it was! But it didn't show that it was actually charging (the battery icon with the bolt didnt appear..but after 3 hours it was fully charged..but this happens only when its switched off..so i cant connect on itunes and i cant charge it while its turned on!! If someone knows please help!!!!!
I tried different cables and different computers and nothing. I can't restore because it's no recognized...
Thanks a lot!!Hi, my iphone 4 was working fine a couple of days ago, but suddenly i plugged the device to my laptop and after a while i realized it wasnt charging, i have tested on a lot of computers but i got the same issue, even on a mac but its not detected.
So finally i turned off and after a while i realized the phone was fully charged, at least i found a temporary solution to this problem but its really anoying to switch off to charge the phoen, if you solve this problem please let us know, apple should fix this problem.
As you can see there is no charging logo when the phone is connected -
Ipad mini is not charging anymore, what is wrong with it?
i tried plugging in my ipad mini, and it doesn't charge anymore, i tried plugging it in the wall i got nothing and also my computer. Could there be something wrong with the cord?
Most computer USB ports do not prove enough power to charge your iPad efficiently so don't bother with that.
Use the charger that came with the iPad and plug that into a known good wall outlet. If the iPad does not charge the problem lies in one of these areas:
1. The outlet is not supplying power
2. The cord is not plugged in correctly at one or both ends.
3. The cord is defective. You might try a friends cord to see if that makes a difference.
4. The charger is defective. Try borrowing one from a friend to test that.
5. The plug on your iPad has dirt or debris in it.
6. There is a hardware failure in your iPad.
For any of these items you cannot test yourself I suggest making an appointment at an Apple store to have your iPad, cable and charger looked at. -
IPad Air 2 not recognized by iTunes
Hi guys.
I bought an iPad Air 2 64GB WiFi+Cellular the day before yesterday. So far, I haven't been able to get it to show up in iTunes. Neither on my laptop (Sony Vaio S, 2011) nor on my workstation (custom built, brand new). Both machines run Windows 7 Home 64 bit. iTunes was not installed on my workstation until yesterday, so it's the latest version. I also updated it on the laptop, and later uninstalled every bit of Apple software and did a clean re-install.
The iPad shows both under "Devices and Printers" and the "Device Manager" as "Apple Mobile Device USB Driver". When I connect it, I get the "Trust this Computer" message - every time. I hit "Trust", the prompt disappears, and nothing else happens. Next time I plug it in, the prompt reappears. Whatever I do, the device doesn't show in iTunes, the diagnostics say "No iPhone, iPod or iPad found". (Sorry for the screenshots all being in German, but you'll be able to understand them, I think ;-) )
I re-installed the drivers repeatedly. I "untrusted" all computers by resetting the security settings on the iPad. None of the official support threads seem to apply, because they all seem to be dealing with the device not being recognized by Windows itself, or a faulty drivers installation, none of which is (or seems to be) the case here. I restarted the tablet while it was connected to the PC. I tried every single USB port I was able to find. :-) This is my first Apple device (not counting a 2nd gen iPod nano, which connects fine, by the way) and it's not off to a good start, I'm afraid.
Any ideas? Thanks.
JulesUsually, with a window's computer, all you need to do is uninstall iTunes, Apple Mobile device service, Apple Application support then restart your computer and reinstall iTunes and plug your device in and it updates the drivers and works.
But it sounds like you've done that.
You could try to poke around in your firewall or antivirus settings, see if that software is blocking the iPad. The only other thing I can think of is to try another cable. I don't think you've done that.
When you uninstall, how do you do it? I suggest that people go in through the control panel and uninstall there via the add/remove program interface. -
IPod Mini is not recognized by iTunes - I get an error message
Hello,
When I conect my iPod Mni to my computer I get the following error message:
Disk Repair
"The disk "iPod" was not repairable by this computer. It is being made available to you with limited functionality. you must back up your data and reformat the disk as soon as possible."
Then iTunes launches but the iPod is not displayed. It appears as on the desktop as a HD.
I have reset it but still have no luck....Please help...I am getting a message that IPOD cannot be recognized, it does not show up on the desktop or in itunes. I did the reset and set it as disc but now nothing happens at all. At least before it was showing up on my desktop. Now it does not even show up there. HELP!!!!!!!
-
Ipad and itouch not recognized by itunes
Pleas has to anyone, just updated itunes and all of the sudden ipad not to bein seen by itunes at all! same for my old itouch ipod but at the same time my new nano ipod and the very old classic ipod is seen and syncronized with no problems what shoud I do?
Windows
http://support.apple.com/kb/TS1538
Mac
http://support.apple.com/kb/TS1591
Maybe you are looking for
-
Help Needed in blocing excess quantity in production module
Dear All, My client wants to block excess issue of raw materials or excess receipt of finished goods in the Production module. Can someone suggest me a solution for this? Regards, Bharath S Edited by: Bharath Kumar on Nov 4, 2010 11:04 AM
-
I have a broken laptop which I can not get into on which my itunes library is stored, I have set up another library on my new laptop but I can not add tunes etc., without sync and erasing because you can only be registered to one library, how do I ge
-
Hi All, We need to sort check printing depending on the payroll area. The scenario below present the clear picture of our requirement. Say for eg, we have three payroll area P1 P2 P3 Now if i payroll area is P1 then the check should be printed based
-
Long sync calls and timeout.
2. TIMEOUT Consider the following situation : Flows 1 --- async call ----> FLows 2 ------ async call --------> Flows 3 -----sync call ----> axis ws The last sync call can take a long time. If this time is too long , Flows 1 , FLows 2 , Flows 3 goes i
-
Portions of web pages are cut off unless I diminish zoom with my mouse control.
Some portions of web pages are cut off