IPad mini retina constantly reboots after iOS 8.1 update - help!

Hello,
I've downloaded on iPad mini Retina 16 GB iOS 8.1 update and installed it directly from the device (so no iTunes involvement). After it got installed with black apple on white screen (process seemed to be finished) - it started rebooting, but instead of starting up it shows shortly (for just a second) blue screen, after goes black and then reboots again - and all this in constant flux: white screen with black apple - blue flash - black screen - white screen with apple. Connecting to iTunes doesn't make anything - it doesn't recognise the device while in state of reboot.
What can I do?
Help!

Hey there,
Got exactly the same problem here. Can't even reset/ shut off the device, so it keeps on flashing with the blue screen.
Ipad Air 1

Similar Messages

  • Ipad mini retina keep rebooting after restored the old iPad mini's setting from iCloud

    Hi All,
    Today I buy a ipad mini retina and I found after I restored the setting in iCloud which was stored by my old ipad mini's setting(restore with old ipad mini by iCloud), finally found the ipad minie retina keep rebooting - show apple logo, blue screen appeared and apple logo appear.
    I connect the ipad mini retina to my Mac book pro, and found that itune shows the name of the ipad mini retine is my old ipad mini's name... I think some thing damage the boot code and cause it keep rebooting,
    Please advise,
    Thanks,
    Simon

    Hey there,
    Got exactly the same problem here. Can't even reset/ shut off the device, so it keeps on flashing with the blue screen.
    Ipad Air 1

  • IPad 2 constantly rebooting after ios 7 update

    My IPad is hosed!  After the IOS 7 update, it is constantly rebooting.  I've tried to reset to factory settings to do a restore but it won't stay on long enough to get it done. Any one out there have any ideas/suggestions?  (besides giving up)

    Have you tried to reset iPad?
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Ipad mini will not restore after ios update 7.1.2

    Hi Community,
         I recieved a message last night about the update 7.1.2 for my ipad mini. I left my ipad on overnight while plugged in while it was updating. i woke up this morning seeing my ipad must be connected to itunes. I connect my ipad to itunes and it must be restored. Every time i try to restore and update the ipad from itunes i get the error code 3004. I have tried hard resetting the ipad, re-downloading the latest version of itunes, and disconnecting and reconnected the usb plug. 

    Hello, Ronald. 
    Thank you for visiting Apple Support Communities. 
    Here are the steps that I would recommend going through when experiencing error 3004. 
    Resolve network errors
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or say the "device isn't eligible for the requested build.". These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
    Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/ts3694
    Error 3194, Error 17, or "This device isn't eligible for the requested build"
    http://support.apple.com/kb/ts4451
    Cheers,
    Jason H. 

  • IPad mini battery draining quick after ios 6.1.1 update

    Anyone having battery problems when they updated to ios 6.1.1 ? My iPad mini battery drains quicker than usual

    1. Try a reset
    2. Backup and restore

  • HT1222 Hi there just bought new iPad mini and can't get iOS 7 to update on it???

    Help can't seem to update my new iPad mini to IOS 7 x

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
        1.    Go into the iPad's Settings.
        2.    Locate and tap "General" from the menu on the left.
        3.    The second option from the top is "Software Update". Tap this to move into the update settings.
        4.    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
        5.    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
        1.    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
        2.    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
        3.    After canceling the dialog box, iTunes should automatically sync with your iPad.
        4.    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
        5.    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
        6.    From the iPad screen, click on the Update button.
        7.    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
        8.    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • HT201210 my ipad 2 will not reboot after the ios6.1 update

    My IPad 2 froze and will not reboot after I went from IOS 6 to the update of IOS 6.1. I tried all the step given and nothing is rebooting it.

    http://support.apple.com/kb/ht4097
    You may need to try this More than once.

  • IPad Air Apps keep crashing after iOS 7.1 Update

    Hi, I just upgraded to ios 7.1 on my ipad air. Everything was working fine before the update. But after, everytime I try to open any app, it attempts to start, but then immediately crashes. Even when I download an app from the app store, it still crashes. I have tried everything (restart, reset, hard reset, etc.) and I can't think of anything else to do but replace it which I don't want to do.

    Hello jscott1997,
    It sounds like all your apps are closing when you open them, even new apps are doing the same thing. I recommend starting by closing all the open apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that and restart the phone and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If it persists, I would next backup your device to iTunes with this article:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    And restore it from your backup with the steps in the following article. These steps will erase, and re install the iOS software, so that when you restore from the back up it is not restoring on top of the previous iOS installation:
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Ipad mini 2 often crashes after ios 8.1.2 update

    my ipad mini2 always shows the apple logo randomly then goes to lock screen - even when i am only browsing facebook. i also always encounter my apps crashing when playing. and my extremeplayerHD always requests update every 5 mins when a movie is playing although there is no app update in appstore. my ipad was fine before the update. kinda annoying that apps always crash or the ipad itself crashes showing apple logo. what can i do? can i downgrade to the old version? pls help

    Backup and restore to Factory Default.
    Do not restore from backup until you have thoroughly tested the iPad.

  • IPad Air - no ringer sounds after ios 8.3 update

    since updating to ios 8.3, my iPad Air has no notification or ringer sounds on apps. eg I'm unable to use the Alarmed app as there's no sound. The volume works ok on music and movies.
    For 2 days after the update, the home screen showed the Ringer icon flashing On and Off on the home screen when I woke the iPad up. (it's stopped this although the fault remains).
    I have held the home and power button and rebooted, but this doesn't solve the issue.
    Any suggestions please?
    I only updated from iOS 7 recently as was trying to avoid the dreaded update bugs....iOS 7 crashed. So does 8.3.

    I'm not 100% sure that I know what you mean by "reset/restore."  If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • 2 ipads and neither will charge after ios 8.02 update

    We have an iPad 2 and an iPad 3 and updated them both from whatever version of 7 we were running to 8.02 last night. Now neither will charge. I've done hard restarts on both of them. I've tried both Apple chargers and different outlets. I've tried connecting it to the PC. Nothing. The 3 is nearly dead now and the 2 is dwindling rapidly. Both were charging just fine yesterday before we updated them. Any ideas?

    For device connectivity issues see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, and TS4062: iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing.
    tt2

  • IPad stuck in recovery mode after iOS 7.1 update how do I fix this?

    How do I fix this ?????

    Is this how you do the restore/recovery?
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Iphone wont turn on after ios 7.1 update, help please

    Guys, please help me with this problem. After updating it to iOS 7.1 its no longer turning on

    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions.   If it does not function, inspect it for signs of damage.   If the button is damaged or is not functioning when pressed, seek service.
    Check    if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See   "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears,   continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

  • HT5654 My iphone 4 will not switch on after ios 7.2 update  help i am disabled and must have my phone working

    Help!! Iphone 4 updated todat to ios7.2 and it has crashed my phone.. cant do anything with it and am disabled.. i need this phone to work urgently. any help out there please?All i have is the apple logo ..nothing else

    Thanks darren  i called apple and they did me a reboot and update. luckily i have my phone backed up ti itunes so when it actually started to work, it was just a matter of time taken to restore it. Thanks .. hope you dont have the same probs with ios7 that i have had.

  • My screen isn't working in certain areas after ios 6.1 update HELP

    I tried the hard reset I also tried restoring it nothing works

    Problem Solved!!!!!
    https://discussions.apple.com/message/20786593#20786593#20786593
    the above link solved my problem.

Maybe you are looking for

  • Imported iphone movies blank

    Hello everyone For the first time I've tried to edit movies created on my iphone in imovie, I have coped to desktop, they open in QT and play with out issues, o I thought why not edit and clean them up in iMovie, Great they import correctly, now when

  • Column does not move using standard folder option for Forms (10.1.2.0.2)

    I have follow the links http://www.freewebs.com/lvterry/oracle/apply_folder.html I found that some column can move around but some are not! Did anyone have same experience? would you tell me how to solve it? Thanks a lot

  • Audigy 2 ZS and Inspiron

    About a year ago, I purchased an audigy 2zs and inspiron 7. surround sound speakers and installed on a compter my friends had built for me (I don't know all that much about computers). At the time, the speakers worked fine with the card and all was g

  • Converting Selection to Vector (image)

    I have a logo that I created for test purposes at a lower resolution. Is it possible to take the active selection of the logo and create a vector from it without having to manually trace over it with the pen tool or adobe illustrator (I do not own il

  • How to claim cashback on recently purchased printer?

    I have just bought a HP Officejet Pro 8600 from a popular office supplies store. I was told that HP were running a cashback scheme from which I could claim cashback after buying the printer. How do I go about claiming this?