IPad mini USB device not recognized

Trying to get my laptop pc with Windows 7 to recognize my iPad mini on iTunes v11.  Actually, trying to get it recognized by my pc at all.  It shows up as an Unkown Device when i plug it in, as well as in my Device Manager.  I've gone through Apple's online Troubleshooting guide (http://support.apple.com/kb/TS1538), but when I click Hardware IDs in the Devices tab as requested, it shows up as Unrecognized (USB/UNKNOWN) still -- the Troubleshooting guide does not adress this scenario.  I've been connecting it to several funcitoning USB ports (that recognize my iPhone 4S just fine) via the "lighting" cable that came with the iPad mini, with the same result.
This is a very simple Windows 7 laptop so it strikes me as very odd that this wouldn't work simply.  I've checked around the net and seen people with similar dilemmas without any known solution yet, as far as I can tell.  Please advise, Thanks.

I tried the method mentioned and it didn't resolve my problem.
After much frustration, I opened Device Manager on my PC with my iPad Mini conected in one USB Port, I located it as Another Device (Not Recognized) / iPad. Double Clicked iPad and manually Reinstall the Driver.
It wasn't recognized as Apple Mobile Device in Universal Serial Bus Controllers before.

Similar Messages

  • IPad I: USB Device Not Recognized

    My iPad is not recognized by my computer (USB Device Not Recognized) or iTunes.  The cable works fine and all other iPods are recognized.  I can't update my iPad or sync.  I have tried uninstalling/reinstalling/verifying other components etc...everything that I can find recommended for this type of issue.  Are there any other possible alternatives or could this be an inner component of the iPad that requires repair?  Naturally, this occurred after the warranty expired.  Any help will be appreciated.

    Most USB ports n computers do not provide enough power to charge an iPad. You need to use the wall charger and plug that into a known good wall outlet.
    The iPad will not show up on your computer like a hard drive. Start iTunes on your computer and plug your iPad into the USB port on the computer. You should see the iPad recognized in iTunes.

  • Ipad error usb device not recognized

    I can hook up my Itouch to computer and Itunes, I have the latest Itunes updates. Turned off both systems and still get error message. Go to device manager and puts it as a mass storage device and it needs software to continue. This is Ipad 1.

    Try to put the devices into Recovery, Note:This Will Erase all the devices data; Power down the device, hold the devices home key will plugging into itunes, then go to device and click restore.
    Hope this works

  • I'm getting a message "USB Device Not Recognized" when I try to sync my iPad.  What should I do?

    I'm getting a message "USB Device Not Recognized" when I try to sync my iPad.  What do I do?

    Is the iPod Touch specifically stated as being compatible?  Have you tried to perfrom a hard reset of the iPod with it still connected?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • My ipad is not connecting the computer when i plug in, USB device not recognized pops up.  I uninstalled and reinstalled itunes without any improvement.

    I cannot get my ipad to sync with the computer, the message USB device not recognized keeps popping up. I've uninstalled and reinstalled itunes without an improvement.

    Do you have firewall or anti-virus software running?  If you do, it helps to turn it off.  Otherwise, click on this link and see if it helps:  http://www.apple.com/support/ipad/assistant/itunes/

  • "USB device not recognized" when ipod plugged in???

    (ipod mini 4gb)
    When I plug my ipod into my laptop I get the message: "USB device not recognized." It says the device has malfunctioned!!! If I click on this error message it says my ipod is an unknown device and no drivers are installed for it???
    It was working fine until a few days ago. If i reset it I can charge it up but that's all, it still does not appear in itunes or on my computer.
    I've tried eveything on the help website but nothing works! Can anyone help?!
    patriot 3050   Windows XP  

    ok my question is do you have a mac or windows based laptop
    here is why and what happened to my ipod mini
    my ipod mini was connected to my macintosh charging while i was using my imac and it came up with a system update 10.4.3 i installed it and finished installing it and afterwards my apple wouldn't recongnize my ipod mini or even display it one the screen i found out by myself that when the apple update got to the end of the update it installed new hard drive drivers but also installed the drivers on the ipod mini which locked out the mini's internal hard drive and my mini then stop responding it would play music and charge but wouldn't connect to the computer
    so what i did to fix it was this
    i went into utilites in mac os x tiger or any version of os x has this and selected disk utility you will notice that the ipod will appesr in disk utility but not on the desktop this is due to a recent system update driver that isn't compatible with the internal drive on the ipod mini so in disk utility just select format the drive in a mac os partition standard works the best it will then format the ipod and the ipod will apear in the desktop again but not as a ipod let me explain when you format the ipod using the disk utility it formats and even erases the firmware of of the hard drive on the mini so when you are done formating the ipod run the ipod updater to reinstall the ipod's operating system and presto your ipod will now work again
    warning: i don't know how to fix this on a ipod in windows so if this is a windows based laptop you need to find someone witha macintosh to do this with sorry

  • Ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    wish i can rmber how mine was fixed i think i just waited tried again and likr magic it worked again left itunplugged, i was like you recently boughtand it happened to me, now i have another diffrent promblem with it.

  • USB Device Not Recognized...on 4 different computers?!

    No matter which USB port, no matter who's computer (sisters, both of mine, or work), all I get is "USB Device Not Recognized".
    I have tried all of the troubleshooting tips including re-installing USB drivers through device manager. This is getting frustrating and I can't find a phone number to call.
    Is my Ipod Nano defective? It works and plays music just fine. It just no longer connects to a USB port. I'm thinking it's time for service unless anyone can help, please.

    Ah! Thank god, I was 10 minutes away from reformatting my computer because of this stupid problem! But hey, I got a question, this iPod nano is my second because my old one broke, but I had the warranty on my first one so I got a new one for... well, not as much as it would be without it. Is the replacement free? Aside from shipping+handling and if not, do you need the warranty to reduce the price?

  • USB device not recognized win7 iPod Touch 1g

    My computer will not recognize my 1st Gen Ipod Touch 8gb when I plug it into my USB port. I get a message USB Device Not Recognized. I've tried everything from resetting the iPod, uninstalling and reinstalling iTunes and all other Apple related programs, to fiddling with the settings in my Device Manager. It will only recognize it as an Unknown Device, not even an Apple device.
    What should I do? I just got this thing through a trade, it's clean, wifi works fine, in great condition. I just don't know what to do! It won't show up in iTunes at all, won't show up as a mass storage device, nothing. I am running Windows 7. I've also tried using different cords, different usb ports, and another computer. None of that made a difference.

    Haveylu looked ere:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    Pay particular attention to the parts concerning the the Apple Mobile Device service.

  • My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing called apple they did not know any help out there TX

    My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Zen Sleek Photo gets USB DEVICE NOT RECOGNI

    I have ZEN Sleek Photo which i use for about a week now.
    Today I connected the player to the computer and got
    "USB DEVICE NOT RECOGNIZED" window in Win XP
    and the Zen Photo froze.
    Disconnected it, reset it using a pin, then turn it on and it's "re-building library"
    It works good as a player but i can't connect it to the computer.
    Tried restarting the computer, restoring the windows to a previous day, connected to all possible USB ports nothing hel
    ps.
    Hope for an answer
    Thanks in advance,
    Danny
    UPDATE.... PROBLEM SOLVED.. LOOK BELOW.. FRED'S SUGGESTIONMessage Edited by dindia on 07-24-2006 2:49 AM

    fred38 wrote:
    Hi i had this problem too and the solution was amazingly simple. (I found it by searching on Google for ages!) Turn your pc off and then unplug it from the mains for approximately 30 mins. I know it sounds crazy but apparantly static electricity can cause problems with usb devices particularly if you have your device already plugged in to USB port-Windows forgets its there! After 30 mins plug your pc back in to the mains and voila! your Zen will be recognised again.
    2:44 AM : After 30 minutes of trying to fall asleep with no success turned on computer and connected the Zen... Didn't have much expectations, but IT WORKED! IT REALLY DID! WINDOWS FOUND THE DEVICE CORRECTLY AND EVERYTHING IS WORKING NOW!
    THANSKS FRED!
    Danny

  • 80gb Classic won't sync or charge; "USB Device Not Recognized"

    I have an 80gb classic, and a 5th gen. 30gb ipod both with the same issue. I recently rebuilt mine and my husband's computers with new MB's and Processors. I reformatted the HDD's and then installed all necessary drivers and the like along with the newest itunes 9. My ipods had no previous problems and worked like a charm 5 mins earlier.
    I hooked them up to my computer and windows came up with an error message saying "USB Device Not Recognized...one of the usb devices has malfunctioned and windows does not recognize it." I put in my other ipod, same error message.
    I have tried everything to fix this including, unplugging all usb's but ipod and trying all usb ports, reinstalling usb drivers, switching to 1.1, uninstalling itunes completely and using older versions 5-8, wiping OS and installing vista instead of XP, putting ipod into disk mode, resetting ipod numerous times, among some other things. This error message comes up on all computers in the house (4) including ones that have not been wiped or upgraded.
    In addition to windows and itunes not seeing it, it will not charge via USB or wall AC power. The Ipods are devoid of charge now, but when they were full on battery life they still played music through headphones and stereo with no issues, they just won't do anything computer related it seems.
    I have not given up hope because I have about 20gb of music and vids I foolishly didn't back up and I want it back. How is this possible that 2 ipods were fine one second then broken the next? Please, Please, Please need help.

    I have a Dell Laptop that I've been synching my iPhone with for six months. Now all of the sudden the connection has been lost. I'm having the same problem as you describe and have tried everything I have seen on this forum and elsewhere to fix it, but nothing is working.
    I think it is an issue with the driver, but I have confirmed that usbaapl.sys driver is installed in "Program Files," "Common Files," "Apple," "Mobile Device Support" folder. I tried copying the driver and putting it in the main Apple folder, but that doesn't help either. I have tried removing and reinstalling iTunes multiple times, rebooting my iPhone and computer (many, many times). I've tried updating the driver and pointing the USB device directly to the driver, but it does not see it. The strange thing is that when my iPhone is plugged in, it charges just fine. It just won't connect to iTunes or synch with my outlook anymore.
    Does anyone have any suggestions? This is a major issue for me as I have to synch calendars to be able to function between work and home. Doubly frustrating that it used to work and now it does not. The only thing that has changed is that I installed printer software and updated iTunes. No other changes to my computer that I am aware of between when it worked and now.

  • HT201210 USB device not recognized

    the message USB DEVICE NOT RECOGNIZED keep showing and i cannot sync my ipad to mu computer. Its charging for more than 8 hours for less than 50% battery life. What should i do? its not even a year old.

    You should use the charger that comes with your iPad. USB port usually do not supply enought current to charge battery.

  • Windows 7 says "USB Device not recognized"

    Hi!
    I have the 64-bit version of Windows 7 and 64-bit iTunes installed. My iPod Photo 40GB won't work with that computer, but works fine with my old XP 32-bit computer.
    Is there any way to solve this problem? When I plug in the iPod, it says "Installing driver" for a short time, then says "USB device not recognized". I uninstalled and reinstalled the driver several times, tried to force W7 to install drivers from "iPod Updater 2005-01-11" and also used Windows update.
    Are there any 64-bit drivers available? I really need to put some music on the iPod now!!

    Have you tried the suggestions here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • USB device not recognized when in Win XP

    When I plug my Ipod touch into the computer via the cable, I get an error message
    "USB device not recognized". I've tried to delete and reload Itunes, I've reset the Ipod and reset all the original settings. I've tried several of the USB ports and also tried 3 different cords for the Ipod. Can anyone help me??? I can get it to plug into my daughter's computer at her house, but not on my computer... this is getting frustrating!

    Thanks for welcoming me... wish I didn't have to come on here though... I wish the IPod(1st gen) was working well. I just downloaded the new Itunes 8.2.1 on my computer when this started. My son-in-law's IPod (2nd gen)plugs in and is acknowledged just fine, for mine, even when I bit the bullet and decided to erase the whole thing and start anew, is still telling me "USB device not recognized". Very frustrating. So it's not only not connecting to my computer, it's now erased. Before I could at least play games, can't do anything now... (sigh)

Maybe you are looking for

  • FKK_EBS_TOI_COPA Mass activity in FS-CD

    HI, For SAP FS-CD project, We want to posting documents into FS-CD by generating the IDOC through LSMW in Delayed Status (With out posting) and will be posted using Mass Run FKK_EBS_TOI_COPA. What is the standard process of posting throguh IDOC. when

  • ORA-07445: exception encountered: core dump

    HI we are on 12.0.1 10R2 Dump file /opt/prod/db/tech_st/10.2.0/admin/PROD_ebs12db/udump/prod_ora_13498.trc Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production With the Partitioning, OLAP and Data Mining options ORACLE_HOME =

  • Extracting Images from EPS - Problem with the Output

    Hello, I got a big problem extracting images from an EPS, which has been made in InDesign. The image does not appear correct. Source code: %ALDImageFileName: Speicher:image.jpg %ALDImageDimensions: 30 30 %ALDImageCropRect: 0 0 30 30 %ALDImageCropFixe

  • Unable to access the following endpoint(s)

    Hi All,     Here i man unable to invoke the siebel services when i try to access the end point i receving this error and also i added oracle/no_authentication_client_policy also still it's problam please any help on this Non Recoverable System Fault

  • Value Type 54 reduction

    Hello, I'm running into an issue with advance payments. I can't seem to get a reduction on the value type 54 posting in funds management when we clear. Our process is as follows: 1. Create sales order 2. Customer must pay for material before picking