IPad Model A1219 iOS freezing up

anybody having trouble with their Apple iPad Model A1219 ios ver. 5.1.1 freezing up?

Well it is a old model. So it could be wear and tear. Try a hard reset whic happens by holding in the home and power buttons.

Similar Messages

  • HT1320 I have a apple iPad Model A1219  Lost pass word how do I set new pass word

    My daughter managed to mess about with my iPod Model A1219 AOGA and she put in pass word nubers
    and when I saded her what she had done I asked her for the numbers she put in but she cannot
    remember so I cannot open my iPod. How can i reset the pass word ? please

    You'll need to connect it to the iTunes library you normally sync it with and restore it.  If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • IPad 3th genetarion iOS freezing

    My iPad is freezing up during use and in some cases restarts. Could anyone help me?
    freezing and restarting during utilization.

    Hello RafaelArnosti
    If you are having issues with your iPad restarting and freezing, then I would recommend restoring your iPad and setting it up as a new device. Then test it out to see if the freezing and restarting issues continue.
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    iPad: Basic troubleshooting
    http://support.apple.com/kb/ts3274
    Regards,
    -Norm G. 

  • IPad model MC820LL iOS 5.1.1. Can this be updated to ions 6?, iPad model MC820LL iOS 5.1.1. Can this be updated to ions 6?

    I just wonder if I can update from ios 5.1.1 to 6 or higher. When I look in Gemeral/Software Update it says that my 5.1.1 is up to date, does that mean no higher version is compatible?

    Time to pamper yourself with a new iPad. Merry Xmas

  • Ipad model A1458 update ios now requires a forgotton passcode

    Upgrading ipad model A1458 ios 8. needs to restart but do not know my passcode

    Hey barryhogg,
    That definitely sounds frustrating! I understand that you are prompted for a passcode on your iPad. If you have forgotten this passcode or are unaware of what it may be, you can use the steps in the following resource to reset it:
    iOS: Forgot passcode or device disabled
    http://support.apple.com/kb/HT1212
    Thanks,
    Matt M.

  • How do i find a user manual for i Pad Model A1219

    where do i find a user manual for an iPad model A1219?

    http://manuals.info.apple.com/MANUALS/1000/MA1632/en_US/ipad_ios5_user_guide.pdf

  • IPAD 4, 64GB WiFi freezes and resets since iOS 7.X updates...

    Within a day of upgrading to iOS 7, my Ipad started having almost daily freezes/spontaneous reboots.  Mostly, I will be in the middle of anything from streaming music to typing in a blog, or an email, when my device will freeze and/or just spontaneously hard reset itself.  I have had a few instances where the device freezes on a screen and won't budge and I have to do a hard reset manually, but, most of the time it will just happen.  Just a short while ago, I was listening to Tune In, and hit my home button to go to another app and it immediately did a hard reset (with the black screen and the white Apple logo).  I have updated to 7.03 and 7.04 and this has not helped.
    I am trying to NOT do a factory reset because I know the device saves diagnostics that will be deleted.  Should I be making an Apple store appointment to have the diagnostics read?  If so, I assume the first step afterwards would be a factory reset and reinstall of all apps fesh (not from backup).
    I'm not impatient, but, this is not like when I upgraded my iPad 1 to iOS 5 and the device really wasn't suited for that OS level.  This is an iPad 4.  It's barely a level back from the latest and greatest, and should have NO problems.
    Any input will be appreciated.
    Thanks!

    Hey rmacbeth, I'm sorry to hear about your iPad troubles. It seems like with every major iOS release, these issues come up on older models (the iPad 3 is relatively new though...weird)
    Anyways, it sounds like you've tried everything already and nothing seems to be working. If you're sure that it's a software issue with iOS and has nothing to do with your physical home button, I'd recommend restoring your iPad to factory settings by doing the following:
    1. Make a backup of your iPad (just connect it and select the backup option in iTunes)
    2. Next, select factory restore. It'll ask you to back up your iPad here if you haven't already.
    3. Try quickly setting it up as a new iPad.
    4. Try to duplicate the issue with the freezing, just use it for a day and see if it happens at all
    5. If everything seeems to be working, restore again except this time, do it from the backup you made earlier
    6. Try again to see if the issue comes up by using it normally in a day
    7. If it does happen again, take it in to the Apple store to get it looked at as there may be some underlying software issue that a factory restore can't resolve
    Again, sorry about your iPad, I hope you can resolve your issues quickly!

  • Mail app freezes after first use on iPad 3 and ios 8.1.  How to solve?

    Apple mail app freezes after first use after reset.  iPad 3 and IOS 8.1.  How do resolve?

    Hi, sixfinger.  
    Thank you for visiting Apple Support Communities.
    Try forcing all applications to close and restart the device.  Once this is done test to see if the Mail app functions correctly.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Cheers,
    Jason H.

  • I just bought a refurbished iPad, model MC496LL.  IOS 5.1.1  Can I upgrade iOS to 6 or 7? How?

    I just bought a refurbished iPad, model MC496LL.  IOS 5.1.1  Can I upgrade iOS to 6 or 7? How?

    No. That's a first generation iPad.
    (98112)

  • IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    If nothing else works, you might try this one. It has worked for many others ...
    Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414
    Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
    iPad 2 and iOS 8.0.2 Problems
    For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
    Here's one person's solution which will help a lot of iPad 2 users!
    keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
    Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
    SOLVED:  IOS 8 Issues on iPad 2:
    I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
    Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
    THE FIX:  FIRST, be sure you have a current iCloud backup of your device.  Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
    To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now!  :-)
    Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

  • How do upgrade my ipad apple model MB293b7 iOS 5.1.1 to iOS 7

    how do upgrade my ipad apple model MB293b7 iOS 5.1.1 to iOS 7?

    You can't; that's a first generation iPad, which can't be updated past 5.1.1.
    (109680)

  • Why is my iPad so slow or freezing since the iOS 8.02 update?

    Why is my iPad so slow or freezing since the iOS 8.02 update?

    Do a reset, no data loss.  Hold down the home/sleep button together until you see the apple logo and then release, then wait for the ipad to boot back up.
    If that doesn't help - settings - general - reset - reset network settings - no data loss, however you will need to reenter known wifi passwords.

  • My Ipad model A1397 indicates unable to install update. An error occurred installing iOS 8.1.1. How do I fix this?

    My Ipad model A1397  (MC763LL/A) indicates unable to install update. An error occurred installing iOS 8.1.1. How do I fix this? 

    Was there a specific error code or error message other than what you state in your post? Perhaps this link will help:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • HT1386 Unable to update older ipad (model MB292LL) to ios 6 - when checking for update msg says ios 5.1.1 and is already up to date.

    Unable to update older ipad (model MB292LL) to ios 6 - when checking for update msg says ios 5.1.1 and is already up to date.

    That is correct.
    You have an original iPad.
    iOS 5.1.1 is the end of the line - that is the latest iOS that model can use.

  • HT4972 My ipad model is MC770LLand I have iOS version 4.3.1. Why can't I update to ver. 5 or 6?

    My iPad model is MC770LL and iOS is 4.3.1. I can't update to iOS 6. Can you tell me why? Thanks.

    My iPad model is MC770LL and iOS is 4.3.1. I can't update to iOS 6. Can you tell me why? Thanks.

Maybe you are looking for

  • How to add unique id to check box in a table

    Hi Experts, I have a static table in which more than 500 records appears in the table, so vertical scroll is displaying in the table. In each row, check boxes and text boxes displays with the data. When the check box is selected, I will do the calcul

  • Thinkpad X1 Carbon touchscreen no longer working - it worked for a year

    I have looked through all the posts on this and it seems there are 2 threads, one where the touchscreen never worked, and this was often the fact that the ordered model didn't have the touchscreen, and second (my issue) when the touchscreen stops wor

  • Can one export thumbnails from Premiere Pro CC7?

    I'd like to be able to export thumbnail images of my footage from my bins in my project window. Is there any way to do this in P Pro? Or another Adobe application? Thanks Chris

  • Can't watch apple video on website

    I cannot watch the latest iPad commercial that is on the apple website. The start arrow has a line through it.

  • Web Dynpro automatically activate service after transport

    Hi all! Well - I've searched SDN.  I've read notes.   I googled.  I can't seem to find exactly what I want.    When a web dynpro component transports it automatically activates in the new system.  However, the application creates an ICF entry.   That