Ipad needs unified inbox for multiple accounts

I hope you can get to this soon!!!

ymidt wrote:
I hope you can get to this soon!!!
It's in iOS 4, which I'm using on my iPhone. The unified email inbox is incredibly useful. Every time I go to my iPad, I get all frustrated, since my iPhone works so well.
I'm not sure when iOS 4 will show up on the iPad, but, if I may speculate without running afoul of the forum cops, I bet the upcoming September announcements will include the iOS 4 for the iPad. I'm hoping!
So, I guess my only advice is "be patient!"

Similar Messages

I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts. How do I capture all files in each account using newly purchased USB external hard drive?

I need to back up my imac running Tiger (no time machine) so that we can upgrade OS. It is set up for multiple accounts. How do I capture all files in each account using newly purchased USB external hard drive? Thanks!

Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Or you can simply use the Restore option of Disk Utility to clone the drive to the backup:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

Copy function for multiple account assingment (cost distribution)

Hello,
We are using multiple account assignment to enter different asset no for each quantity in same line item. Other fields like G/L account remains same.. Is it possinble to copy the value from one asset to all the assets in same line item. The function of copy in clip and inset from clipboard works only for different items not for multiple account assignments...
In R/3 there is function to copy and paste in case of multiple account assignment but could not find the same in SRM.
Any solution????
We are in SRM 4.0...
Amit

Hello,
During PO replication from SRM to R/3, customizing from OME9 is not read and "Partial invoice indicator" is always defaulted to "1" when item has a multiple account assignment.
This behaviour can be overwritten by implementing:
- either BBP_PO_INBOUND_BADI for method BBP_MAP_BEFORE_BAPI,
- or BBP_ECS_PO_OUT_BADI for method BBP_B46B_PO_OUTBOUND.
So, no need to take care of OME9 customizing.
Regards.
Laurent.

GR and GR Non Val indicator in R/3 PO for multiple account assigned SC's

Hi,
We are on SRM 3.0(EBP 4.0) and R/3 4.7.
We have implemented the BBP_CREATE_PO_BACK badi for setting or clearing the GR and IR indicators under certian conditions.
But for Multiple account assigned SC's we get an error message "06181 With non-valuated GR, please also enter GR i ndicator ".
We have tried implementing note# 872000, but this has not solved the issue.
The PO's get created only if we force the GR indicator when transferring the data into R/3.
It seems clear that while creating the PO the system is encountering the GR Non Val indicator but not the GR indicator, so its throwing the error message (we get the same error message when we create the PO from R/3 with GRnon val indicator checked and GR ind unchecked).
The proposed solution is that in the same BADI, along with clearing the GR indicator, we will also clear the GR non val indicator.
This can solve the issue if the indicators are transferred as it is from EBP.
But can anyone tell me if these indicators are also checked/changed in any FM/program in R/3 before the PO is created?
Is there any customizing setting which is affecting this particular behaviour?
Regards,
Srivatsan

Hi Srivatsan ?
In ECC, you have a configuration point :
Materials Management->Account Assignment->Maintain Account Assignment Categories
Here you can untick the indicator you want by account assignment category;
Kind regards,
Yann

Changing field staus group for multiple accounts

Hi,
Is it possible to change the FSG for multiple accounts at the same time, or does it have to be done one by one through FS00?
Thanks and Regards

Hi Sam,
Try this t-code :
OB_GLACC12
Hope it is useful.

Help to configure msoutlook separate inbox for each accounts in office 365 in mac

i have installed office 365 in mac pro book and configured 3 accounts. all the mails are downloading to same inbox. please let me the configuration to receive mail in separate
inbox, sent, draft, etc.. for each accounts

Hi,
By default, the Outlook folder list groups similar folders, such as inboxes, from all of your mail and Microsoft Exchange accounts. This feature can make it easier to read all your messages at once, without having to move around between mail folders.
If you want, you can turn off this feature so that each account and all its folders are separated in the folder list:
http://office.microsoft.com/en-us/mac-outlook-help/show-separate-inboxes-for-each-account-HA102928387.aspx
Also, this is the forum to discuss questions and feedback for Windows-based Microsoft Office client, better to post your question to the forum of
Office for Mac:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Thanks,
Ethan Hua CHN
TechNet Community Support

GR/IR Rounding Logic for Multiple Account Assignment

We have activated business function LOG_MM_MAA_1 (EHP4 release 604), GR valuated. When choosing Distribution on quantity basis and distribute partial inv proportionally, the MIGO postings are different from the MIRO postings. For example, we have a quantity of 12 that we allocate to two different cost centers 33.3 / 66.7 %. We receive a partial qty of 5. MIGO distributes the quantity 1.665 / 3.335, respectively. However, MIRO distributes the quantity 1.666 / 3.333 respectively. Since MIRO is supposed to accept the MIGO quantities and amounts, why is the percentage allocation different? Is there a way to make the percentages equal for MIGO / MIRO? Modification of the percentage field (VPROZ) in the PO to more than 1 decimal is not an option.
Example
    PO (quantity-based distribution, partial inv is proportional: Receive partial Qty 5 of total 12
                         Net Value            Qty              Percen           MIGO           MIRO
    Item:            9,600.00 USD    12.000 pc     100.00       4,340.00      4,340.00
    Account 1: 3,200.00 USD      4.000 pc        33.3         1,446.67      1,446.96
    Account 2: 6,400.00 USD      8.000 pc        66.7         2,893.33      2,893.04
The small difference of $0.29 for this example is inconsequential, but for larger quantieis it will have a greater impact on the account allocation.

U set or U dont set system will flag the GR non valuated once u assign multiple account assignment.
But SAP is coming up with GR valuated for Multiple account assignment in enhancement package 4.
Check out EP4 Presentation at........
https://websmp210.sap-ag.de/erp-ehp
Venkat

Is there a discount for multiple accounts?

Hi
My wife and I have seperate Icloud accounts. Is there a discount for multiple accounts upgrading to the additional storage?

I'm afraid not; and additional storage is per separate account and cannot be shared.

All Inboxes for multiple mail accounts?

I have two email accounts on my iPhone (3Gs). When I'm vieweing "All Inboxes", is there a way to color code the emails for each account? Like my work emails are tagged red and my personal emails are tagged green? Or something similar?

no

Create global inbox for IMAP accounts

I know how to combine multiple email accounts into a single global inbox for POP but how do you do this for IMAP setup?
The instructions I have found in this forum talk of a setting that I can't find.

You can use Unified Folders.
http://kb.mozillazine.org/Global_Inbox#Unified_Folders

How to show inboxs for multiple users?

I recently have started using the Mail App on my iMac. I was using my company's OWA as my standard mail program but I found the Mac mail easier to use. But... In my OWA it was possible for me to have multiple accounts and inboxs from the same server (exchange 2007) and after I had set up my mac mail with my primary exchange account, I couldn't send or recieve from my other accounts. Then I saw that I could type in more e-mail addresses in the Account setup and now it is possible for me to send fromthese accounts.
But still.. I can't see the incoming mails for these accounts. Anybody who knows how to setup mac mail app so I can see the incoming mails for ohter users than my primary?

I've found the same problem in OS X Lion, with Mail, iCal and Address Book getting confused when two Exchange accounts on the same server are configured, resulting in either missing or duplicate entries (despite everything appearing fine when accessing the accounts individually via Outlook or OWA). iOS doesn't have any problem with this setup; two Exchange accounts on the same server work perfectly; the issue seems specific to Mac OS X.
After some experimentation I've found a workaround. Since the issue crops up with two Exchange accounts on the same server, it seems possible to trick OS X into thinking the accounts are on two separate servers through a little DNS manipulation (which I realize may not be a practical option for everyone). Here's what resolved the issue for me:
My external and internal DNS FQDNs for the mail server were mail.mydomain.com.
I set up a new DNS entry - mail2.mydomain.com - as a CNAME for mail.mydomain.com.
On my Mac, I set up Exchange account #1 with the server set to mail.mydomain.com.
I then set up Exchange account #2 with the server set to mail2.mydomain.com.
Even though both FQDNs resolve to the same IP, this seems sufficient for Mac OS X to consider them as separate servers, elliminating the problems I had before when I set both Exchange accounts to the same mail server FQDN.
I've only tried this on OS X 10.7 Lion, and the recent 10.7.1 update, although I wouldn't be surprised if the same trick works for earlier versions of OS X.

Setting up a shared library for multiple accounts on the same machine

I am in idiot. I can't figure it out. This is exactly what I did.
1 - I set up multiple accounts on the computer. 1 for me and another for my wife.
2 - I loaded all the music into my account's public folder.
3 - I set the default folder in both hers and mine iTunes for this Public folder
4 - I then opened iTunes in my account and none of the songs were showing up so I dragged the folder into iTunes and it did its business. Now my account is all set.
Here are my questions:
A - Do I need to drag the folder into my wife's account iTunes as well?
B - If either of us add music when logged in, will it automatically update in the other iTunes interface or is there something specific that needs to (manually) be done?

Doing it the way you did, you each have your own iTunes library file and are using the same iTunes music folder.
Changes by one will not be seen by the other and any new music added by one will have to be added to the library by the other.
Also, if one deletes music, it will be in teh library for the other but it will not be playable because the other person deleted it in the iTunes music folder.
Launch iTunes, then immediately press and hold Option, then select *Create new library*.
Create one in Users/Shared.
Quit iTunes.
Move all your music into the new /Users/Shared/iTunes/iTunes music folder.
Login to your Wife's computer account.
Move all her music into the new /Users/Shared/iTunes/iTunes music folder.
On her account, launch iTunes, then immediately press and hold Option, then select *Choose existing library*.
Select the _iTunes library file_ in /Users/Shared/iTunes.
In iTunes, File -> Add to library and select the iTunes music folder in /Users/Shared/iTunes.
All the music will be there.
Quit iTunes and log out of her account and back into your account and launch iTunes normally.
All music will be there.
You should go to /Users/Shared/iTunes folder and right click - get info, click *Ownership & Permissions*. Set *You can* to *Read & Write* and set Others to *Read & Write*.
Click *Apply to enclosed items*.
Any changes (new/deleted music, ratings, playlists, etc.) by one will be seen by the other sionce you are using the same iTunes library file.
Only one person can have iTunes open at a time. If you use Fast User switching, one will need to quit iTunes before the other can use it.

Installing a LOB App for Multiple Accounts On The Same Surface Device

Hi,
When installing apps to iOS & Android there is no concept of a local user account, and an app can only be installed once. For Windows devices, a single device can have multiple accounts. Those accounts can be local or domain and have administrator privileges
or not.
We are planning to use the Device Enrollment Manager concept in Intune to enroll approximately 200 non-domain joined devices. Each device will have two local accounts - one in English and one in French. We have a LOB Windows App that works in both
languages. We do not want the local accounts with the App to have administrative permission.
It seems you need local administrator permission to enroll the device. If I then install the app from this account, it works. However, I need the app installed on the local English and local French account.
When I log locally into the device using a standard account and log into the Company Portal, it shows the app as installed. It is not, however, installed for that user and is not accessible. Note that I'm using the same Intune account. It is only available
to the local administrator account. The only option I have is 'Re-Install'. When I select that, nothing happens - it is stuck in the "Installing..." state.
If I only enroll the device using the local administrator account and then log into the local standard account to install the app, it doesn't show as installed. When I choose to install it, it gets stuck on Installing.
I'm missing something here...
Is it possible to install an App from Intune more than once on a Surface device? Do the Intune accounts need to be unique per-install? Is it possible to install the app without local administrator permission?
Thank you!
-jd

An update. If I:
Enroll a Windows Surface using a local admin account
Request to install an app from a local standard account it appears stuck on Installing...
Log back in as the local admin account and wait, the app appears.
Questions:
Can the same app be installed into multiple local accounts on the same device? It doesn't look like it.
Is the local account used when the device is enrolled the only local account that will install Intune apps?
-jd

PO issue (for multiple account assignment)

Hi,
I am greatly in need of help from you all.
The problem is as demonstrated under.
A PO is created using the Account assignment category A (Asset procurement). The material to be procured has the Quantity 4Nos.
In the account assignments 2 qty are assigned to one asset and another 2 qty is assigned to diffrent asset. GL account in both the cases remain the same.
After this PO is saved.
GR is done using movement type 101.
now GR is cancelled using movement type 102.
Now in display PO Header- Status tab. here it is showing the quantity to be delivered is 4 but value is shown as 0.00.
I<b> donot understand why the value doesnt get fetched in Status tab of PO header.</b>If I dont use the multiple account assignemnt for the above condition then the values are shown in the Status tab of PO header.
Thanks in advance,
<b>Sheetal</b>

Hi,
Yogesh is right (as usual).
When you create the PO and assign multiple accounts to it you will be prompted to change the GR flag to either indicate NO GR or a Non valuated GR (you CANNOT HAVE a valuated GR for a PO with mulitple account assignements on the one line).
The system does not post any values for this until the Invoice has been posted correctly (or posted and blocked).
So the GR (and return if applicable) always have zero value.
Steve B

Reporting for multiple Accounts by Partner dimension for multiple Entities

Hi all,
I have a report in Reporting Studio which uses a Sum column formula to add data for all the members selected in a prompt for the Entity dimension (which is in the columns of the report).
In the rows I have 2 dimensions, Partner and Account. I have the report set up to display the children of Partner and multiple accounts for each Partner. The issue I am having is that I would need to actually calculate one of the account totals (it is a Yield account) since summing the yields for partners is not valid.
I can't just pull out and calculate the Yield accounts though because the accounts need to be listed by Partner.
Is there a way to group two rows so that I can pull out and calculate the Yield account but still display the accounts by Partner?
So I was thinking:
Partner A Account 1, Account 2
Partner A Yield
Partner B Account 1, Account 2
Partner B Yield
I can't hardcode this as there are hundreds of Partners. If there is a way to set up auto-calculate to Average only the Yield accounts, that would work as well in theory.
Any help would be appreciated. If any clarification is needed just let me know.
Thanks.

Hi Mehmet,
There are too many possible department combinations to actually create member formulas for each one.
The formula for Yield is Revenue/Units. So an example would be $100,000 revenue divided across 1,000,000 units gives a Yield of 0.10.
The more I think about this problem, the more I realize that this may not possible. If a manual calculation is required I would need to have it so that I'm able to match up the children of Revenue with the children of Units in order to calculate the various Yields. From my experience this isn't possible. I am staying away from hard-coding in the report as it would create issues down the road.
If there is some way to utilize auto-calculation that may be the only solution.
Any other thoughts would be appreciated though.
Thanks.

Ipad needs unified inbox for multiple accounts

Similar Messages

Maybe you are looking for