IPad Netflix Title Selection Screen Freezes

(Totally tried to see if a similar issues was posted already, couldn't find one so apologizes in advance if this is redundant.)
I just recently got Netflix (A touch behind the times, I know.) and got it working on my computer right away. Next I downloaded the apps for both my iPhone 5 and my iPad 2 (Wifi-only). The issue I'm having is when I load up the Netflix selection screen and click on a title, the screen pops up with all the information about the title (how many episodes, synopsis, etc.) and the app just locks up at that point. The rest of the device is fine, I can access other apps and do other things, but the Netflix app is totally frozen until I reboot the device. I am only having this problem with my iPad, and I even tested my internet by using my iPhone - I used my data plan to launch the app (no problem, no glitches, no freezing) and then I switched it to "wireless only" and tried it again. Once again, no issues at all, so the problem only seems to be with my iPad. I can resume shows already in progress, it's just the title screen (so far - haven't gotten any further into the app yet than that) that seems to be locking it up. I spent some time working with a Netflix representative and they suggested the usual; reboot the device (check.), reboot the network and modem (check.), test with another device (check.), check with data versus wireless (Could only do this with my phone and not the iPad since it's only wireless.), call the ISP and have them do a modem reset on their end (check.) So, I've done all these things that the Netflix forum suggested and my ISP said to do... (I even did a speedtest to see what my wireless was kicking out and it was 5mbps (roughly) which is not super insane but should be enough to stream netflix... right??) So now I'm stuck. I don't know who else to ask except the Apple Community. Any thoughts? (Oh, and I made sure cookies are on. Saw some kinda-similar issues that were resolved with making sure cookies were on.)
Thanks in advance!

Just an update on this - I haven't really done anything to fix it, but with time (maybe internet cycles, who knows?) it seems to be working okay most of the time. So, looks like resetting the internet and minimizing things that will eat bandwidth helps. Sorry there isn't more of a concrete resolution than this. If anyone has found anything more precise, please let me know! Thanks so much!

Similar Messages

Ipad screen freezes while listening to music

this problem has occurred several times since i upgraded to IOS5 and basically when i am listening to music and want to change playlist or genre,etc... the screen freezes and it will not let me change to what i selected.Whatever i'm listening to that's it unless i go and restore ipad to it's original settings and then it works well until down the road it decides to freeze and must perform restore again.
Please help.Thx.

Ok,i am replying to my question and i have found the solution!
I had set my auto lock to never and when i changed the auto lock to 15 minutes all my problems went away.It's been a week and my problem with the screen going black and not beign able to make any changes while listening to the music app has not come back.
Hopefully whomever reads this and has the same problem just follow my example and you should be fine.
Good luck

IPad screens freezes on landscape

iPad screens freezes on landscape

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How can i set a Title to Parameters(Selection-Screen)?

Hi,
i have a Selection-Screen with two Parameters. Both Parameters should be have an Title.
But how can I set a Title two this Parameters? Is there existing any options????
For example, the Parameters "I_WRBTR" and "I_NBDOCS" needs two Title´s.
Every Parameter must have a title, but how can I realize this???
*I have know only a title for "IWRBTR" but i need also a title for "I_NBDOCS"*_.
DATA: FIELD_BUKRS(10).
SELECTION-SCREEN BEGIN OF SCREEN 0100.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
     SELECT-OPTIONS SEL_BUKR FOR FIELD_BUKRS OBLIGATORY.
     SELECTION-SCREEN BEGIN OF LINE, COMMENT (25) text-005 FOR FIELD IWRBTR_, POSITION 33.
         PARAMETERS: I_WRBTR(10),
                                  I_NBDOCS(3).
     SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN END OF SCREEN 0100.
Thanks for Helps.
ETN

Hi,
try this short example:
DATA: FIELD_BUKRS(10).
SELECTION-SCREEN BEGIN OF BLOCK BLOCK WITH FRAME TITLE T_BLOCK.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK1 WITH FRAME TITLE T_BLOCK1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (29) T_SEL_BU.
SELECT-OPTIONS SEL_BUKR FOR FIELD_BUKRS OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BLOCK1.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK2 WITH FRAME TITLE T_BLOCK2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (32) T_WRBTR.
PARAMETERS: I_WRBTR(10).
SELECTION-SCREEN COMMENT 50(15) T_NBDOCS.
PARAMETERS: I_NBDOCS(3).
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BLOCK2.
SELECTION-SCREEN END OF BLOCK BLOCK.
INITIALIZATION.
T_BLOCK = 'parameter'.
T_BLOCK1 = '1. parameter'.
T_BLOCK2 = '2. parameter'.
T_SEL_BU = 'Buchungskreis'.
T_WRBTR = 'Parameter wrbtr'.
T_NBDOCS = 'Parameter nbdocs'.
Regards, Dieter

How to haveour own titles/captions in selection screen & in column headings

we have SAP B1 2005 A, MS SQL 2005
though i am new to MSSQL/T-SQL programming, purely through lot of trials & errors i have learnt & managed to develop many reports/queries !
but, i am facing some problems : how to have our own captions/title for the options in selection screen & aso in reports/queries column headings.
e.g. :
for Customer Aging analysis, i would like to accept a set of 3 parameters (aging days) from the user. where the user may enter the values 30, 60 & 90 OR any other values.
i have the following codes for this purpose (considering my question's (over) size, only small portions of my program are given below)
declare @mdue1 int,
           @mdue2 int,
            @mdue3 int
set @mdue1 = [%1]
set @mdue2 = [%2]
set @mdue3 = [%3]
but, in the selection screen, the system displays "%1 Debit Amount   Greater than" as the caption & 0.00 as the default value. the same is the case for the other two parameters [%2] & [%3] also.
i tried defining the variable @mdue1 as smallint & also tinyint, but the result is the same.
how to have our own captions/title for the options in selection screen instead of the ones displayed by t-sql based on our SELECT statement.
how to have our own column headings, dynamically defined/coined using variables instead of hard coded columns headings (within quotes).
e.g. in the select statement, instead of defining a column as '<= 30 Days' = T0.due_1
i would like to get the number of days from the user, who may enter 30 or 40 or whatever.
i would like to display the value that the user entered in the column heading using a variable say @mcol1
declare @mcol1 varchar(10)
set @mcol1 = '<= 'convert(varchar(10), @mdue1)' Days'
SELECT T0.CardCode,@mcol1 = T0.due_1 from #CustAging T0
but, this ends up in error.
i have already searched the net for ebooks, articles, etc. for a solution to this problem, but till now, i could not find any addressing these problems.
i have just registered in this forum with a hope to get a solution. thanks a lot in advance.
Thanks & Regards,
Raghu Iyer
Place : Vapi, Gujarat, India

thanks a lot, lstvan.
i think, it i a good "trick" worth trying out.
well, i will now mark this question as answered, but still, if anyone has a direct solution "problem", please do share with us.
i am able to write queries (in fact, full fledged programs) in T-SQL & getting the desired output and for such a trivial thing i do not want to go for an add-on SDK module. but, considering the limitations of T-SQL and the complex requirements of real business world, i think, we have to go the .net way only.
regarding add-ons, i heard that add-ons will slow down SAP B1. is it true ?
Thanks & Regards,
Raghu iyer

Mac Pro boot option screen freezes after I select the Windows partition

Hello,
I have a mid-2010 Mac Pro, and I am currently experiencing an issue regarding booting into Windows 7. Windows 7 64-bit is installed on its own HDD in bay 2 of my Mac Pro. When I restart my Mac Pro (from OS X), hold the option key, and select the windows HDD, the computer completely freezes and locks up. I can't move the mouse or use the arrow keys on the keyboard, and the boot select screen completely locks up after selecting the Windows HDD. This issue does not happen, however, after a cold shutdown and startup. If I completely shut down my Mac Pro, start it up, hold the option key, and select the Windows HDD, it boots into Windows perfectly fine. It is only after a reboot from OS X that the boot select screen completely locks up after selecting the Windows HDD.
I have tried everything I can think of, including resetting the PRAM, SMC, repairing disk permissions, etc. I did also call AppleCare a while back, and the technician on the phone was unable to find a solution. I have also tried selecting the Windows partition in the Startup Disk pane of system preferences, and that did not work either. I have also tried utilities such as BootChamp to automate the restart. Same issue. Could this be a hardware issue?
Thank you,
Robert

pull OS X and try
Too early to even try F8 - Windows safe boot
Try booting Windows DVD would be first on my list
Every month on 2nd Tuesday all the security updates for Windows patches come out
Clone your Windows hard drive - $20 Paragon Clone OS are just like CCC: bootable, swapable backup copies
Don't try using and it has nothing to do with OS X
It may be something you or Windows installed though or even an update pending on restart.
https://discussions.apple.com/community/windows_software/boot_camp?view=discussi ons

ALV-Freeze colums and Icon on Selection Screen

Dear All,
suppose i have 10 columns in an ALV Report and i want to freeze from my 3rd column onwards so that if I scroll to right my these 3three columns can still be seen.How to do this.
also how to display icon on selection screen.I remeber doing some copy pasting from icon table to my selection texts.
How to acheive these two.
Regards,
Rahul Bhat.

Hi,
I hope the following links will help you,
how to freeze columns in table
how to freeze the selection column in the table control of the module pool.
Freeze Column
Regards,
Harish

Title in a selection-screen

Hi.
How i can insert a title in this selection-screen:
SELECTION-SCREEN BEGIN OF BLOCK 2 WITH FRAME TITLE modifica.
PARAMETERS: manual RADIOBUTTON GROUP modf DEFAULT 'X',
fichero RADIOBUTTON GROUP modf.
SELECTION-SCREEN END OF BLOCK 2.
thanks.

http://help.sap.com/saphelp_nw04/helpdata/en/e4/2adbec449911d1949c0000e8353423/content.htm
Eg.
SELECTION-SCREEN BEGIN OF BLOCK BL_1 WITH FRAME TITLE TEXT-000.
SELECTION-SCREEN BEGIN OF BLOCK BL_7.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN END OF BLOCK BL_7.
SELECTION-SCREEN BEGIN OF BLOCK BL_2 WITH FRAME TITLE TEXT-001.
PARAMETERS: R1 RADIOBUTTON GROUP RAD1 DEFAULT 'X',
R2 RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN END OF BLOCK BL_2.
SELECTION-SCREEN END OF BLOCK BL_1.
The plant selection screen.
SELECTION-SCREEN BEGIN OF SCREEN 1111.
SELECTION-SCREEN BEGIN OF BLOCK BL_4 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS S_WERKS FOR MARC-WERKS NO INTERVALS.
SELECTION-SCREEN INCLUDE : SELECT-OPTIONS S_MATNR.
SELECTION-SCREEN END OF BLOCK BL_4.
SELECTION-SCREEN END OF SCREEN 1111.
*The sales selection screen.
SELECTION-SCREEN BEGIN OF SCREEN 2222.
SELECTION-SCREEN BEGIN OF BLOCK BL_5 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS S_VKORG FOR MVKE-VKORG NO INTERVALS.
SELECTION-SCREEN INCLUDE : SELECT-OPTIONS S_MATNR.
SELECTION-SCREEN END OF BLOCK BL_5.
SELECTION-SCREEN END OF SCREEN 2222.
START-OF-SELECTION.
IF R1 = 'X'.
CALL SELECTION-SCREEN 1111.
ELSEIF R2 = 'X'.
CALL SELECTION-SCREEN 2222.
ENDIF.
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
reward points if it is usefull ..
Girish

The iPad has a bruised hand, the screen freezes sometimes buy it 4 months ago and I wonder if I can change the other as it has warranty and I have to keep the receipt?

The iPad has a bruised hand, the screen freezes sometimes buy it 4 months ago and I wonder if I can change the other as it has warranty and I have to keep the receipt?

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Apple will provide a replacement iPad for:
iPad model
Out-of-Warranty Service Fee
New iPad
$299
iPad 2, iPad
$249
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You can get the iPad repaired at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

Report Painter - title for selection screen

Hi
I have created a report for PCA within GRR1/2 transactions. When I run the report, at the initial screen where I select the period for example, there is no title on the screen, it just comes up as ": SelectioN". However when the report runs, I actually see the name of the report.
How do I add the name to the selection screen?

Hi,
I believe, the name of selection screen comes from the name of the Report Group, but I could be wrong...
Regards,
Eli

Selection Screen Title

how to set the title of a standard selection screen ?

Hai
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_matnr FOR mara-matnr.
SELECTION-SCREEN : SKIP.
PARAMETERS : p_mtart LIKE mara-mtart.
SELECTION-SCREEN : END OF BLOCK b1.
Double click on 'text-001'. give some meaningful Name
activate it and run thee report
Thanks & regards
Sreenivasulu P

My iPad screen freezes and will not switch off for at least 5 mins?

my ipad screen freezes and will not turn off or function for at lease 5 mins then just closes down

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!

Default selection screen title

Hello experts,
In my report, I havent created a screen so that takes screen 1000 as default. My question here is, is there any way to use title for the screen 1000 which is default? I cannot create screen 1000 as its default.
when i run my report i want to get title with the parameters, select-options, etc...
Thanks in advance...
Regards,
Viral Patel

Hi Viral,
I think the screen 1000 which is coming by default is a selection screen. If my understanding is correct, then use like this:
SELECTION-SCREEN BEGIN OF BLOCK flight WITH FRAME TITLE text-001.
PARAMETERS: p_carrid TYPE sflight-carrid ,
p_connid TYPE sflight-connid .
SELECTION-SCREEN END OF BLOCK flight.
You can use 'with frame title' addition to the selection screen. and define the text 001 in GoTo -> text elements -> write number 001 and write the desciption of the title you want
Regards,
Swarna Munukoti.

Title + subtitle on selection screen?

On executing the report that I am creating,
the selection screen should show a title and a subtitle below the title.
I put the title in the attributes of the report.
How should I define the subtitle to appear below this title?
ThX!

Hi,
As Thomas said, it's not possible. In your "simulated screen capture", above the application toolbar (it contains the buttons execute + info), you have 2 titles, but only the title bar area is available in the SAP GUI. I think the most probable is that the person who asked you to develop that selection screen has made an error. Note: I tried to use the GOS toolbox container which is located in the left of the title bar, by inserting an HTML control with 2 lines (small title + even smaller subtitle, as the height of the title bar can't be changed), and that gives something very ugly :-D
Sandra

IPad Netflix Title Selection Screen Freezes

Similar Messages

Maybe you are looking for