IPAD/Network Shares/Active Directory Domain
Can an IPAD connect to Network Shares within an Server 2003 Active Directory Domain? If so how?
The iPad cannot natively connect to file shares. There are third-party apps that allow this, though. FileBrowser is one that is often recommended:
http://www.stratospherix.com/products/filebrowser/
though there are others.
Regards.
Similar Messages
-
My work Macbook Pro is using a domain account from my office. When I travel and the domain controller is not reachable it takes 30 to 60 secs longer to log into my system because it has to wait for the active directory domain controller search to timeout before it will use cached credentials (i.e. a mobile account). Does anyone know how to modify my system settings to reduce the timeout or even eliminate the delay all together? I am running the latest version of Yosemite.
Thanks,
MikeHere is the modified VI, saved in LabVIEW 2012. Follow these steps to patch your system:
1. Close LabVIEW 2012.
2. Backup the following file: LabVIEW 2012\resource\Framework\Providers\VILibrary\libFrame_OpenPageRef.vi
3. Replace it with the version attached to this post.
4. Restart LabVIEW 2012.
Now you should no longer experience the 30 second timeout when the class property page loads. I set the timeout to "-1", so it should wait as long as necessary to open the page.
Note that if you ever repair or reinstall LabVIEW 2012, you'll need to patch this file again. Also, I wouldn't try patching any version other than 2012, since there may be other changes made to this VI across LabVIEW upgrades.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
libFrame_OpenPageRef.vi 24 KB -
Hi,
I have successfully setup SharePoint Foundation 2013 as single server farm with SQL Server Standard database in a DMZ environment using local accounts since DMZ doesn't have an Active Directory and hence Domain accounts using powershell as described
in https://theblobfarm.wordpress.com/2012/12/03/installing-sharepoint-2013-without-a-domain-controller
When I run Farm configuration wizard to provision search service application, I get an error:
ERROR: "The service application(s) for the service "Search Service Application" could not be provisioned because of the following error: I/O error occurred."
The log file logged the details of this error as:
ERROR: "Failed to create file share Analytics_e441aa1c-1a8d-4f0a-a079-58b499eb4c50 at D:\SharePoint Search\Office Server\Analytics_e441aa1c-1a8d-4f0a-a079-58b499eb4c50 (System.ArgumentException: The SDDL string contains an invalid sid or a sid
that cannot be translated."
After investigation, I found that potentially the error could be because the timer service is trying to setup a network share for analytics component (as part of provisioning search). It is trying to setup that share with a domain account that happens to
be a local user instead in this case and fails with error “System.ArgumentException: The SDDL string contains an invalid sid or a sid that cannot be translated”.
I got some pointer from the below thread
https://social.technet.microsoft.com/Forums/en-US/c8e93984-f4e5-46da-8e8a-c5c79ea1ff62/error-creating-search-service-application-on-sharepoint-foundation-with-local-account?forum=sharepointadmin
However, the above thread doesn't state that the solution worked.
I have tried creating share manually for Analytics_<Guid> folder but it doesn't work since every time farm configuration wizards is run it creates a new Analytics_<Guid> folder.
Since, I have setup SharePoint Foundation 2013 on a production environment I cannot test and trial various solutions.
Can some please guide me on how to successfully provision search for SharePoint Foundation 2013 setup as a single server farm with SQL Server Standard database in a DMZ environment using local accounts (without Active Directory - domain accounts).
Thanks in advance.
HimanshuMicrosoft documentation doesn't always specifically call out all products (Project Server isn't there, either). But it does apply. You'll need to stand up at least one Domain Controller, or allow port access back to a DC.
Preferably, set up SharePoint on the internal network and use a reverse proxy (which will terminate client connections at the reverse proxy) present in the DMZ.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Active Directory domain controller could not be contacted
Hello
Help please.
I am trying to add a new server (2008) to domain 'bridgelimited.local' - only one DC (2003) doing everything at the moment. The plan is to add the new server, then move everything over from the old machine, then retire/upgrade the old machine and use as a backup.
I am currently trying to dcpromo on the new machine but I get the following error:
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller for domain bridgelimited.local:
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.bridgelimited.local
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:
212.50.160.100
196.168.16.2
- One or more of the following zones do not include delegation to its child zone:
bridgelimited.local
local
. (the root zone)
For information about correcting this problem, click Help.
192.168.16.2 is IP address for the DC.
Any help would be grately appreciated.
Kind Regards
RichardManaged to get the DCDIAG
Here goes (I know my harddisk is failing - that's why I am desperate to get everything shifted to the new server).
Domain Controller Diagnosis
Performing initial setup:
* Verifying that the local machine bridgeserver, is a DC.
* Connecting to directory service on server bridgeserver.
* Collecting site info.
* Identifying all servers.
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\BRIDGESERVER
Starting test: Connectivity
* Active Directory LDAP Services Check
* Active Directory RPC Services Check
......................... BRIDGESERVER passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\BRIDGESERVER
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
* Replication Site Latency Check
......................... BRIDGESERVER passed test Replications
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... BRIDGESERVER passed test Topology
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... BRIDGESERVER passed test CutoffServers
Starting test: NCSecDesc
* Security Permissions Check for
DC=ForestDnsZones,DC=BridgeLimited,DC=local
(NDNC,Version 2)
* Security Permissions Check for
DC=DomainDnsZones,DC=BridgeLimited,DC=local
(NDNC,Version 2)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local
(Schema,Version 2)
* Security Permissions Check for
CN=Configuration,DC=BridgeLimited,DC=local
(Configuration,Version 2)
* Security Permissions Check for
DC=BridgeLimited,DC=local
(Domain,Version 2)
......................... BRIDGESERVER passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
......................... BRIDGESERVER passed test NetLogons
Starting test: Advertising
The DC BRIDGESERVER is advertising itself as a DC and having a DS.
The DC BRIDGESERVER is advertising as an LDAP server
The DC BRIDGESERVER is advertising as having a writeable directory
The DC BRIDGESERVER is advertising as a Key Distribution Center
The DC BRIDGESERVER is advertising as a time server
The DS BRIDGESERVER is advertising as a GC.
......................... BRIDGESERVER passed test Advertising
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role Domain Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role PDC Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role Rid Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
......................... BRIDGESERVER passed test KnowsOfRoleHolders
Starting test: RidManager
* Available RID Pool for the Domain is 2609 to 1073741823
* bridgeserver.BridgeLimited.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 2109 to 2608
* rIDPreviousAllocationPool is 2109 to 2608
* rIDNextRID: 2121
......................... BRIDGESERVER passed test RidManager
Starting test: MachineAccount
* SPN found :LDAP/bridgeserver.BridgeLimited.local/BridgeLimited.local
* SPN found :LDAP/bridgeserver.BridgeLimited.local
* SPN found :LDAP/BRIDGESERVER
* SPN found :LDAP/bridgeserver.BridgeLimited.local/BRIDGELIMITED
* SPN found :LDAP/96d36b0b-a148-4c2f-b3d3-8c2ac83fcaf9._msdcs.BridgeLimited.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/96d36b0b-a148-4c2f-b3d3-8c2ac83fcaf9/BridgeLimited.local
* SPN found :HOST/bridgeserver.BridgeLimited.local/BridgeLimited.local
* SPN found :HOST/bridgeserver.BridgeLimited.local
* SPN found :HOST/BRIDGESERVER
* SPN found :HOST/bridgeserver.BridgeLimited.local/BRIDGELIMITED
* SPN found :GC/bridgeserver.BridgeLimited.local/BridgeLimited.local
......................... BRIDGESERVER passed test MachineAccount
Starting test: Services
* Checking Service: Dnscache
* Checking Service: NtFrs
* Checking Service: IsmServ
IsmServ Service is stopped on [BRIDGESERVER]
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: RpcSs
* Checking Service: w32time
* Checking Service: NETLOGON
......................... BRIDGESERVER failed test Services
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test
because /testdomain: was not entered
......................... BRIDGESERVER passed test OutboundSecureChannels
Starting test: ObjectsReplicated
BRIDGESERVER is in domain DC=BridgeLimited,DC=local
Checking for CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local in domain DC=BridgeLimited,DC=local on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local in domain CN=Configuration,DC=BridgeLimited,DC=local on 1 servers
Object is up-to-date on all servers.
......................... BRIDGESERVER passed test ObjectsReplicated
Starting test: frssysvol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... BRIDGESERVER passed test frssysvol
Starting test: frsevent
* The File Replication Service Event log test
......................... BRIDGESERVER passed test frsevent
Starting test: kccevent
* The KCC Event log test
Found no KCC errors in Directory Service Event log in the last 15 minutes.
......................... BRIDGESERVER passed test kccevent
Starting test: systemlog
* The System Event log test
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:47:27
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:47:41
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:47:55
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:09
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:23
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:38
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:52
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:49:06
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:49:20
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:49:54
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:50:08
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:50:22
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:51:33
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:51:53
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:07
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:21
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:35
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:49
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:03
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:17
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:31
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:45
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:12:23
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:12:37
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:12:51
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:05
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:19
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:33
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:47
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:14:01
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:14:15
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:15:24
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:15:38
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:15:53
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:07
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:21
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:35
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:49
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:17:03
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:17:17
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
......................... BRIDGESERVER failed test systemlog
Starting test: VerifyReplicas
......................... BRIDGESERVER passed test VerifyReplicas
Starting test: VerifyReferences
The system object reference (serverReference)
CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local and
backlink on
CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=BRIDGESERVER,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=BridgeLimited,DC=local
and backlink on
CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=BRIDGESERVER,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=BridgeLimited,DC=local
and backlink on
CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
are correct.
......................... BRIDGESERVER passed test VerifyReferences
Starting test: VerifyEnterpriseReferences
......................... BRIDGESERVER passed test VerifyEnterpriseReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : BridgeLimited
Starting test: CrossRefValidation
......................... BridgeLimited passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... BridgeLimited passed test CheckSDRefDom
Running enterprise tests on : BridgeLimited.local
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... BridgeLimited.local passed test Intersite
Starting test: FsmoCheck
GC Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
PDC Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
Time Server Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
Preferred Time Server Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
KDC Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
......................... BridgeLimited.local passed test FsmoCheck
The only thing I can see (other then the HDD) is the
IsmServ Service is stopped on [BRIDGESERVER]
Hope you can help. Pretty please.
Kind Regards
Richard -
How to install Small Business Server 2008 in an existing Active Directory domain
It is shown on this page:
http://support.microsoft.com/kb/884453, "How to install Small Business Server 2003 in an existing Active Directory domain".
Is it possible to do this with SBS2008 ?
If "YES", are there any published information about the procedure ?Yes, it is. Thank you very much.
But there is something that confuses me - I want to migrate from Win2003Std to SBS2008. And also, I want to keep the existing Win2003Std as a second DC for a long time.
But it is written in the shown article:
... After the migration is finished, you must remove the Source Server from the network within 21 days. ...
Is this rule mandatory for the scenarios where the Source Server is Std, not SBS ? As I know, I can have more than one DC(Win2003Std/Win2008Std) together with SBS2003. But what about SBS2008 ? -
I Have a Windows 7 on an Acer Aspire 5742 laptop and an HP LaserjetP1102w. There are two wireless laptops in the household. I am trying to print from Microsoft Word Starter, but it states "No Printers Installed" and if I try to add a printer I get the message: The Active Directory Domain Services is currently unavailable.
I can print Self Test/Device configuration sheets (on this the iPv4 reads as 0.0.0.0.), a printer test page and a test print from the HP Print and Scan Doctor. It is the network which is not reading the printer.
I have disabled my firewall, un- and re-installed the printer. I have also tried to uninstall and reinstall the printer using the Window 7 installer utility. but that tells this printer "is not currently supported by this Wizard"
I have searched the web for people with the same problem but found nothing that has helped me. Not to put too fine a point on it I am at my wit's end.
You are my last resort (no pressure, then!)
This question was solved.
View Solution.Are the configuration reports with the 0.0.0.0 being printed directly from the printer? A 0.0.0.0 address indicates the printer is not actually on the network (or at least not getting DHCP information from the router). The Print and Scan Doctor should not have been able to print to it unless it happened to be connected by a USB cable as well.
What brand and model is the router?
Is the wireless light a solid blue light or a flashing blue light?
You mentioned an Active Directory Domain Services error message. Outside of corporate networks, this is not an error message you should get. I suspect there might be a deeper software issue at fault. Please provide the exact steps you are using to add the printer to generate that error message.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Cannot Print. "The Active Directory Domain Services is currently unavailable"
Hi there
I cannot print and I have not been able to find the fix via existing forum threads.
System:
Win 7 Ultimate 64 bit German - Profile language is Danish (installed a week ago and completely windows updated)
Office 365 Small Business Premium
HP DV8 Laptop. i7, 512GB SSD, 8GB RAM
HP LaserJet P1006 USB printer.
Problem
No matter if I try to print from IE, Notebook, Word 2013 or anything else, I cannot chose my printer (P1006).
If I try to Add Printer in Word 2013, I get the "The Active Directory Domain Services is currently unavailable" error.
In Devices and Printers, the P1006 is visible, but there is no driver installed.
Trying to install the correct driver:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3435683&prodTypeId=18972&prodSeriesId=3435682&swLang=8&taskId=135&swEnvOID=4063
only creates a general error during installation: "Printer Software Installer has stopped working - A problem has caused the program to stop working correctly. Windows closes the program and will notify you if a solution has been found"
I have tried all the solution software from Windows, from HP (for the laptop and for the printer) - but nothing comes up with any details or suggestions.
What should I try?
Absolutely everything else works perfectly on the system.
Reffered here via http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/cannot-print-the-active-directory-domain-services/1cf47626-a2cd-4b7a-94b6-10cbc8ab02b0Hi,
I suggest you try the following:
1. Try the steps in the following article:
Troubleshoot printer problems
http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems
Fix printing problems by resetting the print spooler
http://support.microsoft.com/kb/2000007
2. Let us try updating the printer driver which might help you in resolving the issue.
Click on the link below for more information on updating the printer drivers.
Find and install printer drivers
http://windows.microsoft.com/en-US/windows-vista/Find-and-install-printer-drivers
3. Remove the printer and add it again:
Go to Control Panel
Select Printers
Right-click on Add Printer
Select Run as Administrator
Now try to add your network printer
Also a thread for your reference:
Error message when attempting to print: Active Directory Domain Service is Currently Unavailable
http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/d6212275-24d6-4168-830a-9441f861cb76
Hope this helps.
Vincent Wang
TechNet Community Support -
Lion Server 10.7.4 VPN service not using my Active Directory domain for authentication
I have Lion Server 10.7.4 setup on a Mac Mini and I have enabled the VPN service for both L2TP and PPTP. The Mac Mini is joined to my Windows Domain at a functional level of Server 2008 R2. I have set the authentication paths to point to my domain in Directory Utility.
What I would like to have happen is for my laptop to be able to VPN into my office network remotely using domain credentials and not local account credentials on the Mac Mini itself. This is a process I have done numerous times on Windows boxes, but for some reason the only way I can get the VPN to work on this instance of Lion Server 10.7.4 is by authenticating using local accounts only.
Does Lion Server 10.7.4 only authenticate VPN users based on it's local account schema? Or can it truly authenticate against an active directory domain?
Any suggestions or help is greatly appreciated. Thanks,Hi g-pirtle,
Yes, I had already done that a few days ago. I was able to add the desired AD group to the allowed users/groups for the VPN service. Thats exactly what is so weird about this...it allows me to search for and add an AD user or group to the list of allowed users/groups, but then when I actually try to use a domain account to authenticate to the VPN is just gives me the "cannot authenticate" error. Very strange.
I wondered if for some reason Apple is only allowing local accounts to be authenticated against. Sounds crazy, but I cannot for the life of me get this to work. I also wondered if Kerberizing the server would help, but when I go to join a Kerberos realm in Open Directory inside of Server Admin, it just has no realm listed in the drop down menu.
Other than that, all other aspects of the Mac Mini being joined to the AD domain seems to be good. I'm really stumped here...
Thanks again, -
I install Active Directory Domain Controller on Windows server 2008 enterprise and dont login on Sql Server 2008 R2. Before install ADDC, I have logon SQL Server 2008r2 Success, After when i install ADDC is don't logon on SQL Server 2008r2 -->not success.
I have uninstalled ADDC but i still can't login on SQL server 2008r2.
please help me. it is very very disaster!
I think is loss account SQL server 2008r2!Hello,
I stronly recommend you post the detail error message to us while you try to connect to SQL Server instance, it's useful for us to do further investigation.
Microsoft recommends that you do not install SQL Server 2008 R2 on a domain controller, there are some limitations:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
After SQL Server is installed on a computer, you cannot change the computer from a domain member to a domain controller. You must uninstall SQL Server before you change the host computer to a domain controller.
After SQL Server is installed on a computer, you cannot change the computer from a domain controller to a domain member. You must uninstall SQL Server before you change the host computer to a domain member.
SQL Server failover cluster instances are not supported where cluster nodes are domain controllers.
SQL Server Setup cannot create security groups or provision SQL Server service accounts on a read-only domain controller. In this scenario, Setup will fail.
On Windows Server 2003, SQL Server services can run under a domain account or a local system account.
So, I would suggest you try to open up Windows Services list and changed the account for SQL Server service.
Regards,
Elvis Long
TechNet Community Support -
I have 2 domain controllers running 2003 server, server1 and server2. I ran dcpromo on server1 and removed AD and removed him from the domain and disconnected from network. I then added a 2012 server
with the same name and IP address server1 with no problem. Replication from sites and services work fine on both controllers.
The new 2012 server1 is GC. I transferred all FSMO roles to server1. Again no problem and replicating using sites and services. AD on server1 is populated correctly.
Now what I had intended on doing was a dcpromo to remove server2 from the domain so I can then add another 2012 server. That is when I get the: "The box indicating that this domain controller is the last controller for the domain
is unchecked. However, no other Active Directory domain controllers for that domain can be contacted.
I have DNS installed on both servers and both look good with replicating there. Strange thing is when on the 2012 server within DNS if I right click and connect to another DNS server I can add server2 just fine but from server2 adding server1 it tells me it
is not available.
Help please!Hi,
As there is server 2012 DC (SERVER1) DC is operational in a domain then "This domain controller is the last controller for the domain" should be remain unchecked when you demote SERVER2 DC.
If you are getting error "Active Directory domain controllers for that domain can be contacted" while demoting SERVER2 DC then check the DNS pointing on both as per below article, disable windows firewall on all DC, less possiblities but worth to check if both
are different site then check the ports are open on firewall.
http://abhijitw.wordpress.com/2012/03/03/best-practices-for-dns-client-settings-on-domain-controller/
http://technet.microsoft.com/en-us/library/cc766337(v=ws.10).aspx
http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls.aspx
run “ipconfig /flushdns & ipconfig /registerdns“, restart DNS server and NETLOGON service on each DC and try to demote server2 DC.
If issue reoccurs, post dcdiag /q result.
NOTE: If initial replication was completed between both DC (new 2012 and old DC) then you may remove the server2 DC from Active Directory forcefully (DCPROMO /FORCEREMOVAL) and perform metadata cleanup.
Active Directory Metadata Cleanup
http://abhijitw.wordpress.com/2012/03/03/active-directory-metadata-cleanup/
Best regards,
Abhijit Waikar.
MCSA | MCSA:Messaging | MCITP:SA | MCC:2012
Blog: http://abhijitw.wordpress.com
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees and confers no rights. -
Forest trust unable to find Active Directory Domain Controller
I have two domains with a two-way forest trust. We'll call them ForestA and ForestB. They're on seperate subnets. ForestA's DCs are in one physical location. ForestB's DCs are in two locations, one of which is shared with A.
I'm unable to route traffic directly from the remote DC in ForestB to the subnet ForestA is on, so I created a new DC in ForestA that sits on the subnet ForestB uses (basically, I can't route between subnets via the wireless bridge between locations, but
can within the same location).
I found this: http://www.neomagick.net/zen/2008/11/30/using-dns-to-force-a-domain-trust-through-a-specific-domain-controller-dc/
I followed the instructions to set the new DC in forest A to be the only one the remote DC in forest B was aware of.
Nslookup ForestA.com resolves correctly to this DC, but I'm unable to validate the trust relationship, getting the error:
"Windows cannot find an Active Directory Domain Controller for the ForestA.com domain. Verify that an AD DC is available and then try again."
I'd appreciate any help.In the event viewer, have you found any event id's that corrospond with this error? Have you ensured all ports required are open? Windows firewall is correctly setup? NIC is properly configured?
Statement below taken from: http://technet.microsoft.com/en-us/library/cc961803.aspx
If you receive the following error, ERROR_NO_LOGON_SERVERS while using the Nltest tool to query the secure channel, this is usually indicative of the inability to find a domain controller for that domain. Run nltest /dsgetdc: < DomainName > : to verify
whether you can locate a domain controller. If you are unable to find a domain controller examine DNS registrations and network connectivity.
ADDS Ports:
http://msdn.microsoft.com/en-us/library/dd772723(v=ws.10).aspx -
Active Directory Domain Service Unavailable
I've just bought this printer and gone through the installation.. all seemed well.
Network set up also went well and wireless network test results show 'No Problems Found'.
When I click on print icon in Word, Excel etc etc I get the usual print dialogue box. If I just click on PRINT all seems fine, BUT clicking on Properties gets - 'The Active Directory Domain Service is Currently Unavailable'. Click on PROPERTIES and the program 'locks'. If I try to close it I'm told there is a dialogue box open (which there isn't). I have to force a shut down via task manager.
I've tried closing Firewall - no effect.
I've tried USB connection - same problem.
I've run Windows troubleshooter - nothing detected.
Any help please?
NHello Nath1310,
Welcome to the HP Forums.
I see that you having some issues with the computer freezing up after attempting to access the printing menu.
Try running the HP Print and Scan Doctor to see if any software or driver issues are causing the freezing. Let me know if you see any error codes or messages.
Write me back when you have time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Have a very recent Lenovo Ideapad Laptop running Windows 8.1. Connected via USB port to HP LaserJet Pro CM1415 frw Color MFP Printer. Was able to print fine nearly 2 weeks ago, but something recently happened - either a new windows or office 2013 update
or perhaps I blew away a certain file by mistake. I can see the printer installed but cannot print to it from anything (Word, Notepad, IE, Firefox etc.). The one thing to note is that usually when I plug or unplug a USB related device, Windows 8.1 recognizes
this and makes a certain chime noise, but with the printer USB cable it never makes that noise - making me think that it never fully recognizes the printer. Also when I select the printer (from within the control panel) and right click for properties (via
admin rights) It never lets me fully connect to it.
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc. Its really annoying because this printer was working fine nearly 2
weeks ago. Looking for any advice now. Thanks.
-ChrisHi Chris,
à
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc.
I noticed that you had reinstalled the printer. Just a confirmation, when un-install this printer, please check
if this printer still exist in registry. For more details, please refer to following KB.
Registry entries for printing
If printer entry still exist in registry, please delete that printer entry and re-install this printer again,
then check if this issue still exists. (Please backup registry entries before operating registry. It will help us to avoid unexpected issue.)
àand now see
message Active Directory Domain Services is not available
By the way, would you please let me know where/when get this
Active Directory Domain Services is not available error message? Or provide a screenshot of it?
(Please hide all protected or private information) Please check if all services are running correctly on the computer. Meanwhile, please refer to following article and check if can help you.
Printer
Problem: Active Directory Domain Services is currently unavailable – Why does windows say no printers are installed?
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
Failed to install Active directory domain services
Hi,
I've installed the AD Domain Services on Windows2008R2 by following this guide http://technet.microsoft.com/en-gb/library/cc755059%28WS.10%29.aspx. After click 'Install', step 6, it showed failed to install but there is no clue why it was failed, at all.
Here is a log I copied from C:\Windows\logs\ServerManager.log
2204: 2011-01-05 12:57:54.333 [InstallationProgressPage] Loading progress page...
2204: 2011-01-05 12:57:54.411 [InstallationProgressPage] Begining Sync operation...
2204: 2011-01-05 12:57:54.458 [Sync]
Sync Graph of changed nodes
==========
name : Active Directory Domain Services
state : Changed
rank : 1
sync tech: CBS
guest[1] : Active Directory Domain Controller
guest[2] : Identity Management for UNIX
ant. : empty
pred. : empty
provider : null
name : Active Directory Domain Controller
state : Changed
rank : 4
sync tech: CBS
ant. : .NET Framework 3.5.1
pred. : Active Directory Domain Services, .NET Framework 3.5.1
provider : Provider
2204: 2011-01-05 12:57:54.458 [Sync] Calling sync provider of Active Directory Domain Controller ...
2204: 2011-01-05 12:57:54.473 [Provider] Sync:: guest: 'Active Directory Domain Controller', guest deleted?: False
2204: 2011-01-05 12:57:54.473 [Provider] Begin installation of 'Active Directory Domain Controller'...
2204: 2011-01-05 12:57:54.473 [Provider] Install: Guest: 'Active Directory Domain Controller', updateElement: 'DirectoryServices-DomainController'
2204: 2011-01-05 12:57:54.473 [Provider] Installation queued for 'Active Directory Domain Controller'.
2204: 2011-01-05 12:57:54.473 [CBS] installing 'DirectoryServices-DomainController ' ...
2204: 2011-01-05 12:57:55.020 [CBS] ...parents that will be auto-installed: 'NetFx3 '
2204: 2011-01-05 12:57:55.020 [CBS] ...default children to turn-off: '<none>'
2204: 2011-01-05 12:57:55.036 [CBS] ...current state of 'DirectoryServices-DomainController': p: Staged, a: Staged, s: UninstallRequested
2204: 2011-01-05 12:57:55.036 [CBS] ...setting state of 'DirectoryServices-DomainController' to 'InstallRequested'
2204: 2011-01-05 12:57:55.051 [CBS] ...current state of 'NetFx3': p: Installed, a: Installed, s: InstallRequested
2204: 2011-01-05 12:57:55.051 [CBS] ...skipping 'NetFx3' because it is already in the desired state.
2204: 2011-01-05 12:57:55.098 [CBS] ...'DirectoryServices-DomainController' : applicability: Applicable
2204: 2011-01-05 12:57:55.114 [CBS] ...'NetFx3' : applicability: Applicable
2204: 2011-01-05 12:57:55.770 [CbsUIHandler] Initiate:
2204: 2011-01-05 12:57:55.770 [InstallationProgressPage] Installing...
2204: 2011-01-05 12:58:49.176 [CbsUIHandler] Error: -2147021879 :
2204: 2011-01-05 12:58:49.176 [CbsUIHandler] Terminate:
2204: 2011-01-05 12:58:49.254 [InstallationProgressPage] Verifying installation...
2204: 2011-01-05 12:58:49.270 [CBS] ...done installing 'DirectoryServices-DomainController '. Status: -2147021879 (80070bc9)
2204: 2011-01-05 12:58:49.270 [Provider] Skipped configuration of 'Active Directory Domain Controller' because install operation failed.
2204: 2011-01-05 12:58:49.270 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
'Active Directory Domain Controller'[STAT] installation(s) took '54.7870005' second(s) total.
[STAT] Configuration(s) took '0.0003053' second(s) total.
[STAT] Total time: '54.7873058' second(s).
2204: 2011-01-05 12:58:49.270 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 110
2204: 2011-01-05 12:58:49.286 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
made
2204: 2011-01-05 12:58:49.286 [InstallationProgressPage] Sync operation completed
2204: 2011-01-05 12:58:49.286 [InstallationProgressPage] Performing post install/uninstall discovery...
2204: 2011-01-05 12:58:49.286 [Provider] C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
2204: 2011-01-05 12:58:49.286 [CBS] IsCacheStillGood: False.
2204: 2011-01-05 12:58:49.786 [CBS] >>>GetUpdateInfo--------------------------------------------------
2204: 2011-01-05 12:59:46.520 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
2204: 2011-01-05 12:59:46.520 [CBS] <<<GetUpdateInfo--------------------------------------------------
2204: 2011-01-05 12:59:46.598 [DISCOVERY] hr: -2147021879 -> reboot required.
2204: 2011-01-05 12:59:46.739 [InstallationProgressPage] About to load finish page...
2204: 2011-01-05 12:59:46.739 [InstallationFinishPage] Loading finish page
2204: 2011-01-05 12:59:46.801 [InstallationFinishPage] Finish page loaded
I also checked the event viewer, here are the event properties occurred during the installation:
Initiating changes to turn on update DirectoryServices-DomainController of package DirectoryServices-DomainController-Package. Client id: RMT
Update Directoryservices-DomainController of package DirectoryServices-DomainController-Package failed to be turned on. Status: 0x80070bc9
Installation failed. A restart is required.
Roles:
Active Directory Domain Services
Error: The server needs to be restarted to undo the changes
Please help.
Thanks,
balrogzAnother thing to check is to ensure the server service is up and running.
http://blogs.dirteam.com/blogs/paulbergson/archive/2014/04/29/can-t-add-the-role-quot-active-directory-domain-services-quot-to-my-2008-r2-server.aspx
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights. -
Hi everyone,
I've been banging my head against this for a while and hope someone can help me.
Running Windows Server 2008 R2 Standard with Service Pack 1.
When I try to add the Active Directory Domain Services role to the server it gets to about 90% complete and then dies.
The ServerManager.log shows the following information, I have run the System Readiness Tool - output below - with no errors found.
At a loss on what to do next. The only other links I've found suggest rebuilding the server which I would really like to avoid...
Help appreciated,
John
ServerManager.log (extract)
==========
name : Active Directory Domain Services
state : Changed
rank : 1
sync tech: CBS
guest[1] : Active Directory Domain Controller
guest[2] : Identity Management for UNIX
ant. : empty
pred. : empty
provider : null
name : Active Directory Domain Controller
state : Changed
rank : 4
sync tech: CBS
ant. : .NET Framework 3.5.1
pred. : Active Directory Domain Services, .NET Framework 3.5.1
provider : Provider
8720: 2012-01-18 10:54:41.853 [Sync] Calling sync provider of Active Directory Domain Controller ...
8720: 2012-01-18 10:54:41.853 [Provider] Sync:: guest: 'Active Directory Domain Controller', guest deleted?: False
8720: 2012-01-18 10:54:41.853 [Provider] Begin installation of 'Active Directory Domain Controller'...
8720: 2012-01-18 10:54:41.853 [Provider] Install: Guest: 'Active Directory Domain Controller', updateElement: 'DirectoryServices-DomainController'
8720: 2012-01-18 10:54:41.853 [Provider] Installation queued for 'Active Directory Domain Controller'.
8720: 2012-01-18 10:54:41.853 [CBS] installing 'DirectoryServices-DomainController ' ...
8720: 2012-01-18 10:54:42.399 [CBS] ...parents that will be auto-installed: 'NetFx3 '
8720: 2012-01-18 10:54:42.399 [CBS] ...default children to turn-off: 'WCF-HTTP-Activation '
8720: 2012-01-18 10:54:42.415 [CBS] ...current state of 'DirectoryServices-DomainController': p: Staged, a: Staged, s: UninstallRequested
8720: 2012-01-18 10:54:42.415 [CBS] ...setting state of 'DirectoryServices-DomainController' to 'InstallRequested'
8720: 2012-01-18 10:54:42.430 [CBS] ...current state of 'NetFx3': p: Installed, a: Installed, s: InstallRequested
8720: 2012-01-18 10:54:42.430 [CBS] ...skipping 'NetFx3' because it is already in the desired state.
8720: 2012-01-18 10:54:42.430 [CBS] ...current state of default child 'WCF-HTTP-Activation': p: Installed, a: Installed, s: InstallRequested
8720: 2012-01-18 10:54:42.430 [CBS] ...skipped child 'WCF-HTTP-Activation' because it is already installed
8720: 2012-01-18 10:54:42.461 [CBS] ...'DirectoryServices-DomainController' : applicability: Applicable
8720: 2012-01-18 10:54:42.461 [CBS] ...'NetFx3' : applicability: Applicable
8720: 2012-01-18 10:54:42.539 [CbsUIHandler] Initiate:
8720: 2012-01-18 10:54:42.539 [InstallationProgressPage] Installing...
8720: 2012-01-18 10:54:42.758 [InstallationProgressPage] Verifying installation...
8720: 2012-01-18 10:54:42.758 [InstallationProgressPage] Installing...
8720: 2012-01-18 10:55:03.740 [CbsUIHandler] Error: -2147021879 :
8720: 2012-01-18 10:55:03.740 [CbsUIHandler] Terminate:
8720: 2012-01-18 10:55:03.787 [InstallationProgressPage] Verifying installation...
8720: 2012-01-18 10:55:03.802 [CBS] ...done installing 'DirectoryServices-DomainController '. Status: -2147021879 (80070bc9)
8720: 2012-01-18 10:55:03.818 [Provider] Skipped configuration of 'Active Directory Domain Controller' because install operation failed.
8720: 2012-01-18 10:55:03.818 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
'Active Directory Domain Controller'[STAT] installation(s) took '21.9535541' second(s) total.
[STAT] Configuration(s) took '0.0007754' second(s) total.
[STAT] Total time: '21.9543295' second(s).
8720: 2012-01-18 10:55:03.818 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 110
8720: 2012-01-18 10:55:03.818 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes made
8720: 2012-01-18 10:55:03.818 [InstallationProgressPage] Sync operation completed
8720: 2012-01-18 10:55:03.818 [InstallationProgressPage] Performing post install/uninstall discovery...
8720: 2012-01-18 10:55:03.833 [Provider] C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
8720: 2012-01-18 10:55:03.833 [CBS] IsCacheStillGood: False.
8720: 2012-01-18 10:55:04.333 [CBS] >>>GetUpdateInfo--------------------------------------------------
8720: 2012-01-18 10:55:34.784 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
8720: 2012-01-18 10:55:34.784 [CBS] <<<GetUpdateInfo--------------------------------------------------
8720: 2012-01-18 10:55:34.815 [DISCOVERY] hr: -2147021879 -> reboot required.
8720: 2012-01-18 10:55:34.831 [InstallationProgressPage] About to load finish page...
8720: 2012-01-18 10:55:34.831 [InstallationFinishPage] Loading finish page
8720: 2012-01-18 10:55:34.831 [InstallationFinishPage] Finish page loaded
CheckSUR.log
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 13.0
2012-01-18 10:33
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 220
No errors detectedHi John,
Thanks for posting.
Performed some research and some results say that this problem can be caused by HD Write Caching.
To disable Write Caching:
1. Go to Device Manager.
2.Click the plus sign (+) next to the Disk Drives branch to expand it.
3.Right-click the drive on which you want to enable or disable disk write caching, and then click Properties.
4.Click the Disk Properties tab.
5.Click to select or clear the Write Cache Enabled check box as appropriate.
6.Click OK.
If no luck, Please check if any erros can be found in Event log, Dcpromoui.Log and Dcpromo.log
The following articles maybe helpful to you:
Known Issues for Installing and Removing AD DS
http://technet.microsoft.com/en-us/library/cc754463(v=WS.10).aspx
You cannot install Active Directory Domain Services
http://support.microsoft.com/kb/975142
Thanks
ZHANG
Maybe you are looking for
-
Hi. I'm trying to make my guest network disappear from the list of network choices that appears to everyone in the neighborhood. Even though I followed the great suggestions on how to delete the network, it's still appearing in the list that everyo
-
After creating a report using table 'dept', I have updated that dept table and increased the width of the column dname from 14 to 20. I would like to know how to change the width of the dname column in the report that I created earlier so that it can
-
CS4- Problem with mouse /element selection
My son is working in CS4 an is experiencing this issue - If he clicks once over a vector element in an illustration, then moves the curser to another area, the curser then places the element that was clicked on move to that spot on the artboard. Not
-
Popup doesn't work in Internet Explorer
Hi everyone My site is www.caveataudiens.net, in the music section there is a button called Jukebox which has this code to open a popup window: on (release) { getURL ("javascript:NewWindow=window.open(' http://www.caveataudiens.net/music/mp3player.ht
-
I have a project I am working on trying to teach myself flex. I have gotten it to read from a database and display a list of users in the data grid. When I click on a user, I want it to display more information in a User Details Panel. My selectedIte