Ipad New Generation - power switch on , not working.

i am playing the games in ipad and idle for  2mins.The screen becomes black, thought it was just an automatic lock but i could not turn it on. It was 50% charged. The power switch is not working. what could be the problem?

Try a reset:
1. Hold the Sleep and Home button down (together) for about 10 seconds
2. Until you see the Apple logo (very important)

Similar Messages

  • I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on.  So I know the speakers still work.  I have tried resetting all settings and made sure that my side switch was auto lock not auto mute.

    I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on.  So I know the speakers still work.  I have tried resetting all settings and made sure that my side switch was auto lock not auto mute. I have tried the mystical swiping upward on the screen with 4 fingers to get some special sound menu (which I never succeeded in getting).  My headphone jack doesn't work all the time either so some times my kids can hear their games and sometimes they can't.  I am super frustrated at this point.  So any suggestions would be great.  Am I missing something basic or do we just have a soundless iPad now?

    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • My iPod's OFF/On switch is not working and I have checked over internet that this problem is very common with iPod Nano 6th generation, my iPod is now out of warranty period. What shall i do now?? Please Suggest!!

    My iPod's OFF/ON switch is not working and I have checked over internet that this problem is very common with iPod Nano 6th generation, my iPod is now out of warranty period. What shall i do now?? Please Suggest!!

    You can do an out-of-warranty replacement at an Apple Store for a fee, get a 3rd party site to repair it, sell it for parts, or get a new one.

  • My ipad has a black screen and the power button is not working. Help!

    This is the second time my ipad screen has gone black. The power button is not working. I reset the ipad about two weeks ago  when this happened. However, this time I am not able to get itunes to recognize the device. It keeps asking to respond from the ipad (obviously with a black screen that isn't going to happen). Im not sure what to try next...thoughts?

    Have you tried to give it a reset?
    Reset
    Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.

  • Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • HT201412 my iphone ( 4 ) suddenly switched off...i press several time in power button but not working.pls advice me

    my iphone ( 4 ) suddenly switched off...i press several time in power button but not working.pls advice me

    hold the power button and home button for about a minute
    plug it into a computer with itunes on
    either way should work

  • HT1349 my iphone4s power butter do not work any more . can i change a new one in att store

    my iphone4s power butter do not work any more . can i change a new one in att store
    it gives me troubles

    outianleiz,
    Mine quits working every now and then.
    Most of the time I can fix it by doing a power button, home button reset. When that doesn't work plugging it into my computer does.
    What have you tried?
    Also I believe it is a software problem not hardware. So I would suggest not replacing it until you can get your hands on the "iOS 5.1" update. That is what I am waiting on before I calling Apple and/or ATT and raising  the roof with someone over this issue.

  • Satellite A110 - WiFi switch is not working with new WiFi card

    Hello Everyone
    I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
    New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
    Please help

    Hi
    Maybe you could enable the Wlan card using different way;
    Go to device manager -> WLan card properties -> Advanced tab
    There you could check if there is a option which would enables the WLan.
    Its worth a try
    Otherwise its a compatibility issue like suggested by PinkPanther
    I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

  • My iphone4 power button does not work can i take it into apple store would they replace it with a new iphone or whats the deal?

    My iphone 4 power button does not work can i take it into apple store and replace it or what are some options

    Assuming it is out of warranty Apple Genius bar will exchange for an out-of -warranty  replacement unit identical to the to donor
    In US $149 for in iPhone 4

  • T440p Fingerprin​t power-on is not working

    Hi , i just recieved my new T440p ,  Fingerprint @ power-on is not working although all config. is done typically in lenovo fingerprint manager pro & fingerprint security settings in the BIOS , i start my laptop it goes through windows normal startup & logon without any request for fingerprint .
    Solved!
    Go to Solution.

    Dear Ahmad
    Welcome in lenovo community
    Have you tried to first to enroll your fingers first , an application called Lenovo Think Vantage should be installed .
    Do you have this application installed ?
    Also you need to check the device manager , it's better to send us a screen shot of it .
    Let us know
    Thanks
    Alaa
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Software Update Point Switching is not working for some Clients

    Hi there,
    I found nothing similar here and I hope this is the right section.
    I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
    get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
    So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
    From how I understand SUP switching as described here
    http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
    the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
    As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
    So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
    make no attempt to switch.
    I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
    are available in my environment.
    I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
    where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
    Things I tried additionally to all the log file / WMI / registry sniffing:
    Removing the Software Distribution Folder and restarting the Windows Update Agent
    Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
    Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
    I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
    Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
    "reset" on those machines without reinstalling them.

    Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
    The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
    into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
    Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

  • My iphone power button is not working. What can I do?

    Hello, I bought an iphone 5 last year and it still in warranty . It has some regular scratches for the use but it never felt down.
    The power button is not working now and I sent to an apple retailer here in Brazil (SOMA - Revenda APPLE Solution Expert e Assis. Tecnica Autorizada) to fix it. They refuse to do it saying that the button is not working because of  the scratches what I believe is not true. And the retailler suggest to me to buy a new one.
    And more, I receive the iphone with the factory configuration and I don’t know why.
    I would know what can I do to fix the iphone. And How can I use the warranty here in Brazil.
    I couldn't find an e-mail from apple.com support to report this.
    I will stay in US next december. I can fix my phone in an Apple Store?
    I'm very dissapointed with the technical assistance here in Brazil.
    Thank You

    Meaning that you cannot restart or reset the phone?  If you haven't tried already, try both options.
    Otherwise, you can do a backup & restore, or even a restore as new (only after a successful backup).
    If the issue persists, then look at a replacement. Either it will be a hardware defect (free if within warranty), or physical damage ($49 with AppleCare Plus, $149 without it.)

  • Netflix netflix streaming from iPad to hgtv using VGA cord not working on TV.  It's fine on the iPad but an error message says to turn off mirroring in airplay.  Don't know what to do.

    Netflix streaming from iPad to hgtv via VGA cable not working.  Message says to turn off mirroring in airplay, but I don't know what that is or how to turn it off.  Any help?

    Try resetting the iPad (hold the home and power buttons down until the Apple logo appears).
    Barry

  • The power button does not work

    i recently noticed that my original iphone power button does not work i push but nothing happens. I know that i have to fix but the problems is that the warranty is been over for long i need to know a good place to repair because the apple people said they could not fix it. I live in Texas so somewhere close would be nice.

    This link is for one 3rd party repair service you can contact for the first generation iPhone and for the iPhone 3G, which is located in Dallas.
    http://www.drcellphone.com/iphone-repair-service.php
    http://www.drcellphone.com/iphone2g.php

  • My ipad2 is disabled and my power button is not working, how to reset the passcode?

    My ipad2 is disabled and my power button is not working, how to reset the passcode?

    Hi, there is no fix for this unfortunately. However you can plug your iPad into iTunes and providing you have made a backup, you can restore from it
    you say its disabled, what does the message on the screen say?

Maybe you are looking for