IPad no longer pairing with Bose bluetooth headphones

I have a iPad  with iOS 8.2. Suddenly I am not able to connect to my headphones. I rebooted the iPad but still no luck. I am able to connect the headphones to my Blackberry so do not think problem is with headphones. Will appreciate any help.

Make sure that the headphones are put into "Discovery Mode" before trying to connect. Check the user guide for the headphones.

Similar Messages

  • I cannot get my new Ipod Nano to pair with my bluetooth Headphones. It just searches endlessly.  These same headphones work with my blackberry playbook.  Does Apple only allow certain bluetooth devices to pair?  i.e. only the ones sold on their site?

    I cannot get my new Ipod Nano to pair with my bluetooth Headphones.  It searches without finding it. This headset works fine with my blackberry playbook.  Any suggestions? 

    thanks for reply... I saw on the Nano package that it is only compatible with bluetooth 4v.  Is that the same as A2DP.
    That's probably the problem... it wasn't a high-end headset. 

  • Ipad no longer pair with Mac

    Ipad suddenly stopped sharing internet from Macbook, how do I reconnect it?
    I was using the internet provided by wifi that my mac had access to on my ipad. It was connected and working fine, then suddenly it said it couldn't pair with my mac anymore. Right now it says 'pairing unsuccesful: make sure victoria's macbook is turned on, in range and is ready to pair" it is all of those things.
    I appreciate any help. Thank you

    iOS devices do not pair with one another, as their is no reason to.
    What is it you are trying to do?

  • IPod touch won't pair with Bose bluetooth anymore.

    I've been using my new Bose Bluetooth speaker with the newest iPod touch and I connected fine and it's been playing everything good for weeks. When I usually play it my iPod is on a dock charger but when i put it on my ihome today and tried to choose Bose everything froze and disconnected now when I try to connect it with the speaker it won't go and read the manual and tried resetting the speaker but the iPod won't connect and they're both in discoverable. I don't know what to do anymore. Does anyone know how to fix this?

    - Try resetting the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next try resetting network settings: Settings>General>Reset>Reset Network Settings.  You will have to repair and rejoin wifi networks.
    - Restore the iPod.

  • Audio will no longer pair with vehicle bluetooth

    I purchased my 4S the day they first came out. Up until a week ago everything has worked great in relations to my 2010 Mazda CX-9. BLuetooth paired without issues. Music (iPod and Pandora) played great through vehicle. Phone calls worked great. Last week my music stopped playing through BT. The vehicle requested paring the audio side of the phone. No matter what I do it will not connect. Never seen this before...any advice? Thanks!

    Mark your above reply as Solved so that others searching for this issue will find the Solution.
    Cheers.

  • After ios 5 update, bluetooth on ipod touch not funcioning-keynote app no longer pairing with ipad

    Since the ios 5 update--bluetooth longer funcioning on ipod touch.  iPad no longer syncing with keynote remote app on ipod touch.  My iPad no longer sees the iPod touch.  The Bluetooth indicator does not come on or flash on the ipod touch.
    any help or suggestions?

    alex.g wrote:
    I've got a fix, even for  those who don't have hotspot (like me) who want to get the ipad and iphone talking over bluetooth again.
    First, I should say that I said when I got my 4s, the problem was solved. It was not. I was just connecting via wifi, but I wanted bluetooth back.
    Here is how I got it back without hotspot.
    1. Launch keynote on one device and the remote on the other as you normall would.
    2. Find another app that bluetooth links ipad and iphone (I used 'pictransfer light'). Install on both devices and launch on both devices. Follow the promt to get a bluetooth sync.
    3. Double push the home button both devices to pull up the multi-tasking and open keynote and keynote remote on the relevant devices.
    4. In keynote, go to settings; advances; remote. You should now be able to get the remote to link (you may, on the device running the remote, need to hit settings and then 'new keynote link'.
    Once I launched pictransfer, the bluetooth logo was blue on both devices the whole time I ran through the other steps. I suspect that that was also the point of using the hotspot service.
    Also noteworthy: I am yet to try this 'in the field'. For all I know, this won't keep a connection for as long as one might need. I'll find out on Thursday when I rely on the remote for 90min. On the positive side, I was able to keep the connection even when I double clicked home and closed pictransfer while leaving keynote and keynote remote open...
    This work-around worked -- I found that as long as I launched the "Pictransfer for iPad Lite" app just before the presentation that it seemed to work fine.  However, if Bluetooth gets turned off or you disconnect I think you will have to repeat the work-around -- nice find.
    Apple really needs to fix this.  They even have a posted document describing how to link two devices by Bluetooth and the truth is that it just does not work as they say.  They need to add whatever code into the Keynote & Keynote Remote apps to initiate bluetooth to connect the devices.  It's fine if it prefers WiFi, but it should give you the bluetooth option as well.

  • Bose bluetooth headphones pairing issue

    I have an iPhone 5 32Gb and an iPad 3 32Gb.  I had both running iOS 7.1 and my Bose Bluetooth headphones worked exactly as they should.  One of the great features of these is that they can pair to the iPhone and iPad at the same time, meaning that I can watch a video on my iPad and when the iPhone rings, it rings through the headphones and pauses the video. 
    Since upgrading both devices to iOS 7.1.1, I can only pair to one of them at a time.  Let's say that I am paired to my iPad, but now want to use my headphones to listen to music on my iPhone.  I now have to go into Bluetooth on my iPhone, have it forget the Bose headphones and then repair.  If I want to go back to my iPad, I have to go through the same process for the headphones to work on that device. 
    Has anyone else come across this issue?  From briefly looking at this forum, Apple seems to have made a mess of Bluetooth in this iOS release.  Any ideas on a fix? 

    I actually did both iPhone and iPad tethered to iTunes. I favour doing this instead of OTA.  The iPhone was a replacement from Apple and immediately updated through iTunes to iOS 7.1.1. 
    @Peter Gillespie, are you using an iPhone and iPad with your AE2? 

  • Bose Bluetooth headphone with skype

    I recently purchased a Bose Bluetooth headphone planing on using my 3g iPhone with Skype, as ie does work with the plug in set that came with the phone. Is there any way I can do this ?

    I have found the answer to my question. Leave the ipad at home and use a laptop.

  • HTC Sensation no longer pairs with iPad 3 after IOS 6 Upgrade

    HTC Sensation no longer pairs with iPad 3 after IOS 6 Upgrade

    Lots of people having this problem? Hmm. For what it's worth I haven't seen that problem on my iPad 3
    This is a user to user forum so no one here would have any idea whether there is a real problem and, if so, whether Apple is working on a fix.
    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

  • Christmas morning ipad mini won't pair with my bluetooth stuff

    Christmas morning ipad mini won't pair with my bluetooth stuff

    What "Bluetooth stuff" exactly? Here is a list of Bluetooth profiles iOS supports and what they can be used for:
    http://support.apple.com/kb/ht3647

  • I just downloaded the newest IOS software and now my iPhone5 won't pair with the Bluetooth in my car (the car system says it's paired when I try to re-pair it but then when n try to make a call it tells me it doesn't recognize the phone.

    I just downloaded the IOS upgrade, 7.0.2, and now my iPhone 5 won't pair with my Bluetooth in my car, despite repeated attempts to re-pair the two and despite the fact it's been paired fine previously.  The car system tells me it's paired but then when I try to make a call I get another message that says there is no paired phone.

    You can't override it no matter what you do. The device has to connect to the server to complete the iOS update. You could try rebooting the iPad and see if that lets you connect to the server after it starts up.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that will not work, you can try connecting to iTunes on your computer and see if the activation will complete. Sometimes when thes activation issues arise, you end up having to restore the device again, but first things first. Reboot and see what happens.

  • Apple Wireless Mouse - No Longer Pairs with Mac Mini?

    Hi there,
    I've had an Apple Wireless Keyboard and an Apple Wireless Mouse for several months. Unfortunately, the Apple Wireless Mouse no longer pairs with the Mac Mini (Core Duo, 1.66) -- it is getting very frustrating.
    I've tried rebooting the machine, restarting the mouse, and nothing works. Sometimes I get the Bluetooth Setup Assistant which says that it found 1 Mouse, but it failed to pair.
    I replaced the batteries, but nothing changes.
    Help!

    Normally that's caused by debris under the trackball preventing the rollers from moving.  Turn the mouse upside down and rub the trackball Vigorously with a microfiber cloth. 
    The symptoms are usually that scroll will work one direction but not the other.
    Captfred

  • How to get ipad won't pair with droid razr

    I tried to get my ipad mini to pair with my android razr in order to sync c.alendar info. Was unsuccessful - how do I get them to pair?

    You can't. iPad Bluetooth does not support it.
    Supported BT profiles: http://support.apple.com/kb/HT3647

  • HT4972 I cannot pair my new I pad 3 with my I phone 4, both are now running os 5.1.1, will pair with other Bluetooth but not each other. Help please

    I cannot pair my new iPad 3 with my iphone4, both are now running on os 5.1.1, please help with any suggestions you may have.  They are both pairing with other Bluetooth devices (including the wife's iPhone 3G on 4.2.1).  Thanks.

    Hi,
    I have purchased a wifi only I pad 3 in the hope I could thether using the 3G through my I phone 4.
    My I phone 4 and my iPad 3 cannot seem to find each other at all through Bluetooth yet
    Can find other devices ok no problems. I am wondering if it is an issue with os 5.1.1

  • My iPad 4 wont pair with my iPhone 5.  Why?

    My iPad 4 wont pair with my iPhone 5.  Why?

    What are you trying to do? If you are trying to use your
    iPhone to provide internet access for your iPad, does your
    wireless provider offer internet tethering and is your account
    provisioned for it?
    If you are trying to connect using bluetooth, this is not a feature of
    iphone, iPad or iOS, never has been.
    Bluetooth is supported for stereo headsets/speakers,
    handsfree telephone devices/headsets, some keyboards,
    some peer-to-peer apps from the app store and internet
    tethering where provided by the carrier.
    Other than this it will not connect to a phone/computer/device. 
    (thanks to ckuan for the wording)

Maybe you are looking for

  • HP Photosmart prem C310. The wireless radio is not functioning. contact HP support

    Hi there, I turned off and unplug my printer as had to move it for a couple of weeks, and now I have put it back and switched it on it will not print.  It will not atomatically contect to internet.  I have checked router and it is fine.  I get the wi

  • How exactly are item shown in item LOV on PO Line

    Hi everybody, I want to understand how exactly items are shown in item LOV on PO Line. The reason I am asking is we can set purchaseable property on individual organizations not just at validation organization . what I mean is lets say if I have thre

  • I can't get flashplayer to work on all sites

    I am having a problem with viewing a website that uses a flashplayer. I can go to youtube and see the videos fine, but the site that I need to go to, I get a white page, and nothing on it. I have to get into this site for my job and do training at ho

  • Error message in an exit

    If i want to give informative message in an exit like for eg. when the exit fires , i should be able to display information like "Error occurred due to", "Solution" etc. how can i do it. Right now i am able to write a single sentence, but if i want t

  • Can we use two costing variants for standards cost estimate release.

    Hi, We have 2 plants (plant 5100 and plant 5200) under company code 5000. We have run standard cost estimate(CK11N) for material 98001000027 at plant 5100 using costing variant ZG01 and at plant 5200 using costing variant ZG02. First, we released  st