IPad no longer recognizing CF card through USB port

I'm a photographer, Using a USB cable to a CF card reader, I can import and view my images via the iPad. This not only is easily done, Lexar's president has a video on Youtube demonstrating this.
I've used this feature regularly for several events.
However just recently the iPad has simply stopped recognizing the USB reader and said that there isn't enough power to do this.
So from 7/4-2010 through Friday,7/23 I was able to import images via this daisylink chain. Then on Saturday 7/24 I was no longer able to do this.
The iPad does seem to be losing battery power more quickly than when I first got it, so my assumption is that it is a mechanical thing and the iPad battery is defective.
Any thoughts? Please remember, this function operated smoothly for a month, and is described regularly in another company's marketing materials, and no changes to the iPad have taken place.

Have you tried making sure the iPad is fully charged before doing this? I suppose so.

Similar Messages

  • Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    jrburrows wrote:
    Ok, fair enough.  But since Job's death - Apple's control on leaks has been terrible.  I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones.  Because of the vast ammount of leaks.  With the iPad mini leaks, it's 99% sure to come out next week.
    Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
    Amd by "others" I meant other people on iPads - not other devices/manufacturers.  It's possible to do so, I just want to know how.  I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
    No, USB is not the future, you missed the memo about cloud and wireless computing?

  • The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In atte

    My home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

    Maybe not too late to help you.
    For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
    In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
    HTH.

  • HT4101 Can I load photo's from my IPad back onto my SD card through the Camera Connection Kit?

    Can I load photo's from my IPad back onto my SD card through the Camera Connection Kit?

    No, it only supports the copying of photos and videos to the Photos app on the iPad, not from the iPad. You can copy photos that you've copied to the iPad via the kit to your computer : http://support.apple.com/kb/HT4083

  • TS2634 When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    Well ... the charger is the original charger and just checked and confirmed it is a 5.1V charger. How come? Next is why when i connect my iPad via original usb cable, no response from macbook pro? used to sync with iTunes now totally dead.

  • How can i use labview for communicating with pic18 microcontroller through usb port?

    Hi all,
    I want to make a DAQ card using pic 18 microcontroller which has a built-in usb protocol. I have the firmware of this
    controller which will  make it as a usb device. How can i receive the analog voltages from this DAQ card in Labview? or i mean to say that how i can communicate labview with the Pic 18 microcontroller through usb port? I have also the
    mpusbapi.dll file which is for Visual C++. Can i make changes in this dll file to make it compatible with labview?

    Which labview version do you have. Up to labview 7.1 it was no USB raw communication options. I have heard it did not work well in 7.1, but from 8.x most of the errors were fixed.
    Here is a link it should be useful http://forums.ni.com/ni/board/message?board.id=170&message.id=340676&query.id=365864#M340676
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • My ipad 3 is frozen on the plug into itunes page. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (there is no usb port on an ipad). If anyone could help it would be appreciated.

    My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.

    I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
    iPad User Guide for iOS 6
    iPad User Guide for iOS 7

  • While charging through usb port i am getting small shock at the edges of my iphone 5??why is this?

    I am getting small shock when charging my iphone 5 through usb port?why is this??any solutions??

    Bring the phone and USB cable to Apple for evaluation

  • How do I get iTunes output through USB port ?

    How do I play iTunes through USB Port ?

    Have you updated both Airport Express units to the latest firmware?

  • My first generation iPad no longer recognized in iTunes, neither via usb nor wi-fi. Did all the steps  recommended in Apple iPad support. Now what?

    My first generation iPad is no longer recognized in iTunes. It just doesn't show up neither via USB nor via wi-fi.
    I've checked the usb connection and cable and its OK.
    I checked that iTunes is up to date on my Mac.
    I reinstalled iTunes on my Mac. 
    I restarted my Mac,
    I've restarted my iPad.
    The iPad has IOS 4.3.1 (8G4) installed. And without the iPad being recognized in iTunes  I can not update the IOS nor apps, nor remove unneeded photos. The iPad is completely filled up, no memory left to allow even updates via cellular or via wi-fi.
    Trying to gain access to update the IOS and to update APPS and to remove the pics I already have backed up and do not need on this iPad locally.
    PS: I even tried to connect the iPad to a different Mac and it was not seen in that iTunes either.
    So, what can I do now?
    Any suggestions besides using it as a paper weight?
    Thanks

    Hello there, Blueye3355.
    The following iPad Troubleshooting Assistant has some good steps to run through, to make sure you've covered all your bases:
    Apple - Support - iPad - iTunes Assistant
    http://www.apple.com/support/ipad/assistant/itunes/
    If following all the steps listed there are additional options on the last step you might want to try or review the "if the issue persists" steps mentioned in the second part of:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • After an update, my touch is no longer recognized by iTunes or USB input on car stereo

    Formerly I was able to connect my touch to both iTunes (Windows) and through USB on my car stereo (Kenwood).  After updating the touch's IOS I cannot connect to either.  I am able to connect to the car stereo through blue tooth.  I did open an iCloud account for the touch but I doubt that is a factor.  I have tried turning the unit completely off and that does not help.  I uninstalled iTunes and reinstalled it making certain I used the 64-bit version.  It is still not recognized.  Any ideas on what to try next?

    As it turns out, this was a hardware failure.  One of the pins on the bottom connector was bent and  caused the problem. What burns me is the problem initially showed itself after updating to ios 5.0.1.  I tried a reset over the weekend (including deleletion of my entire music collection) to no avail.  I took it in to the local Apple store today and they essentially turned it into a paper weight.  After putting it into recovery mode the unit would no longer turn on at all.  Unfortunately they wouldn't replace the unit for free because it was 11 days out of warranty.  I could have lived with the Touch with all my music on it, but it was worthless after the music was deleted.  I feel like they should have replaced it for free.  I was planning on upgrading to the next iPhone but this has shaken my confidence (as well as irritating the living **** out of me).
    To be fair, Apple did replace the player at a reduced rate.  That was better than nothing.

  • IPad no longer recognized by any computer after 4.2.1 update

    Hi,
    my iPad is no longer recognized by any computer after the 4.2.1 update. It does not show up in iTunes and this even in recovery mode. When connected to charger it does not show that it would charge (but it does). The iPad is still usable except in the iPod app is says "cancelling sync" and does not show any music.
    I already reinstalled iTunes, reinstalled the Apple Mobile Device Service, used different computers with different OS version, but it does not show up, not even in the system profiler (USB tab).
    Any idea what I should do? I mean it is quite unlikely that there is a hardware issue as the problems appeared right after the 4.2.1 update (from 4.2).
    Thanks in advance

    Yes I know, I already reset like 100 times. Turned off-on...
    I guess a recovery could solve the problem, but how do it if the iPad does not even appear in iTunes. I guess it is somewhat stuck in "cancelling sync" and therefore will not accept an USB connection (the USB port behaves like it is deactivated).

  • My first generation ipad no longer recognized by itunes 12.1.2.27

    I just recently updated iTunes to  12.1.2.27 now my first generation iPad is no longer recognized.
    iPad Model MC349FD / Mid 2011 iMac 3.4GHz, 32GB ram, OS X 10.10.3

    Hello there, Blueye3355.
    The following iPad Troubleshooting Assistant has some good steps to run through, to make sure you've covered all your bases:
    Apple - Support - iPad - iTunes Assistant
    http://www.apple.com/support/ipad/assistant/itunes/
    If following all the steps listed there are additional options on the last step you might want to try or review the "if the issue persists" steps mentioned in the second part of:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • IPad no longer recognized

    1st gen iPad not recognized by either computer after upgrading to iTunes 10.5.
    One is XP 32-bit and other is Win7 64-bit.
    Any solutions?

    I have tried all the steps I have found in similar discussions including removing every last trace of Apple software from my system and restarting. Used a known good cable hooked directly to motherboard USB ports. All Windows updates and hardware drivers are updated.  Windows still doesn't recognize the device. Manually selecting the driver results in an "unable to start (code 10)" every time. The iPad synced fine on my laptop until the iTunes 10.5 upgrade. But now works neither on it or the new desktop I just built.

  • IPod Touch 4th gen after updating to IOS 6.0.1 no longer plays sound when connected to a JVC KW-AV60BT through USB port.

    It used to work fine, but now when you plug in to the USB, it properly identifies the head unit in settings>General>About, and the JVC unit displays album art, track info and scrolls through music fine, but no sound comes through the speakers. I've tried to reset all settings on the iPod, I've tried the reset on the head unit, even disconnected the vehicle battery and nothing changes. I can also add that my sisters iPhone 4S on IOS 6.0.1 also performs the same when connected. I've tried my Touch in the USB port of my 2010 Chevy truck and that works fine. oh, and an MP3 player worked proper with the JVC USB port.

    - Try resetting the car system if you can.
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    However. sometimes an iOS update breaks compatibility. In that case you will have to wait for a firmware update to either the care system or the iPod.

Maybe you are looking for

  • Inconsistency BSEG, BSIS, BSAS

    Hi, likeable consultants! In transactions reports: FBL3N and FS10N I have differents accounts balances display. analyzing BSEG Table, I have 15 line itens, and BSIS and BSAS have 18 line itens. I request a solution to adjust these 3 line itens to bal

  • Solaris Branded Zones, Unable to reboot/Halt

    Hi People, Hoping someone can help. Im running Solaris 10 on a Sun Workstation Ultra 45. I have two disks. One disk has the default install of solaris 10 all updated to the latest patches.The second disk is mounted as /zones and holds each of the zon

  • Long phone call, backlight problem.

    Well sometimes i have long phone calls to deal with, say for around 3-4 hours. When i want to end the phone call i obviously move the phone away from my ear and press the "End Call" button. Problem is, that the backlight doesnt come on. I dont know w

  • Test JDBCFactory Failed

    Hi, I want to use a JDBC connection in VC. When I create a jdbc System in my portal (ep 7 sps10) I get a connection error in the test. When I change the The Factory Class to SDK_JDBC  I don't get a connection error. After changing it back to JDBCFact

  • UME initialization error

    Dear Experts,        I've tried to connect an LDAP to our UME by configuring the ume.persistence.data_source_configuration parameter in the com.sap.security.core.ume.service in Config Tool, which cause the startup error of our j2ee engine, I changed