Ipad not clearing memory after movie erased
Ipad not clearing memory after movie erased. Any fixes out there?
I did both a soft and hard reset. I just wanted to know if I am going to have to do this every week after my kid loads movies and erases them. It seems this is a major flaw in 7.03 and needs to be rectified.
Similar Messages
-
Accounting document not clearing even after payment posting.
In document flow of may cash sale process showing the accounting document 123-- Not cleared.
After payment receipts in FBCJ and posted & saved, eventhough the accounting data not clearing, but in FBL5N the report is updating, what can be the step i am missing to update the document flow TOP to BOTTOM cleared.
Waiting for your replies
Thanking you,
VeeraDear,
Kindly use the transaction F-32 (Clear Customer). Select both Uncleared items or document numbers.
Regards
Ramesh -
MaxDB 7.5 does not clear logarea after full backup
Hi all,
We have MaxDB 7.5, turned on the auto-log-backup and are running full data-backups every night.
The problem is that the log-area is not cleared as I expected, so the log-area is filling up at 300 MB per day.
Was I wrong to expect the log-area to be cleared after a full backup?
Is it a parameter-setting?
Any ideas how to solve this?
Thanks in advance,
MartinHi,
check Note 869267 - FAQ: MaxDB LOG area
regards,
kaushal -
Screen not clearing once after MIRO POSTING
Hi Expert
We done Enhancement in Miro, This enhancement working but once posted the document, screen will clear but in this process after posting the doc everthing as it is, screen is not clear.
Please give me a solution
Thanks
Mani.S
Edited by: smanimba1 on Oct 11, 2011 10:57 AMHi ,
Check whether Posting is done properly or Not . There might be some error left to be cleared in your Enhancement .
regards
Deepak. -
Downpayment is not clearing even after invoice has been fully paid
Good day to everyone,
I am currently having an issue with a down payment not clearing even though the invoice has been fully paid. to my understanding, once the order is fully invoiced- down payments should be cleared as well, am i correct?
The order related billing's status containing the down payment is set to "fully invoiced", yet when i view the document flow containing the down payment, it states "not cleared". What could be the problem? Could i just manually release the down payment? thanks in advance!hi
if you are doing vendor manual payment program then you clear down payment as below.
T-Code-F-44 Clear down payment
Select special gl indicator
then press enter and clear down payment against invoice. -
ITunes track on ipad not in order after update
iTunes LP not in numbered order after iPad update. Checked if shuffle mode was the issue but seems not to be the problem.
I Had the same issue. I spent a good couple of hours talking to iTunes support last night about it. All they could say was that iTunes extras are only available on iTunes and Apple TV.
this morning I had to erase all the content from my iPad and the restore it from an iCloud back up. When the back up was restored the extras were available on my iPad. Might just be a coincidence. -
Screensaver does not clear properly after sleep mode
henever I start my iMac up from sleep mode the screensaver doesn't clear so that I can enter my password. Instead, wherever my mouse is hovering the screensaver is erased in a sort of block by block mode? Then when I hit enter after typing in my password it goes onto the desktop and everything is fine. Anyone know why??
Where is the screen saver picture saved? If it's on an external HD that could be the problem, move it to the internal drive in that case. This is explained in http://reviews.cnet.com/8301-13727_7-57354082-263/q-a-macfixit-answers/?tag=mnco l;txt
-
Ipad not starting up after complete drain
I'm charging the iPad using the wall adapter. Because I saw online it said it's good to drain the battery. I usually use up the battery before charging it. But these few days I kept having problems of charging.
Now the iPad displays a low battery image. This usually shows up when we start charging after the complete drain. It used to be very fast to start up, but it has been showing this even after 2, 3 hours. The ipad won't start.
This problem only started a few days ago. At first it won't charge, but after one day it seemed to be charging normally again. But after that, it charged very slow sometimes. It charged only to 2%.
I saw the discussions, there are a lot of people having the charging issue.
My ipad is still under warranty, though it's going to expire soon. I know that I need to send it to repair, but I need to back up first. Without turning on the ipad, I can't even back up now.For proper reporting of the battery’s state of charge, be sure to go through one charge cycle per month. Not every day.
-
Problem with file share from iTunes to iPad - not enough memory
Hi
I've got iTunes (10.7.0.21) installed - latest version.
On my iPad I have an app - OpenSong. I need to transfer a number of files to this app throug Application - File share (don't know if this is the correct description, I use a Danish version).
I want to add around 750 small files (1-3 kb) to the iPad. The problem is that it only will copy around 30-60 files at a time before iTunes comes with a box indication that the program encountered a problem and cannot copy the file xxxxx. "Not enough availabel memory".
I then have to close iTunes and continue from where I came to. If i don't, that is I try to copy again, iTunes frequently crashes.
iPad 3, 64 GB - plenty of free memory
Win 7, 4 GB RAM, plenty of free disc space. Windows and iTunes fully updated.
Anyone got an idea? Or how do I report this to Apple?Hi Damse,
I have the same problem. I also have about the same number of small files to transfer to the iPad. The point at which the transfer through iTunes to the iPad varies within the range you describe. I also have taken to loading in as many files as I can, integrating them into the applicatiom, ejecting the iPad, and stopping and starting iTunes again and repeating the process.
Best regards,
Bob Charest -
IPAD not coming up after restoring to factory setting
after a succesful trial on a colleagues itune pending upgrade of mine to the latest version, we successfully set up mi nenly acquired IPAD but later restore to factory setting when we discovered it was 'not charging'. Unfortunately, my IPAD has not been coming up after my upgrade (it is not even seeing itune anymore)- not even on anybody else's system. Can you please offer any help.
Thank you in anticipation of your prompt suggestion or resolutioni had a scare tonight as IMAME4all is out i thought id try to have a look and my ipad wouldnt restore in itunes i tried three times and on the last as it was trying to wait for ipad i noticed that home sharing was on in itunes i turned of off in the menu and bang it bleww up .... / no not really but it started restoring and all good for normal pad.
-
Photoshop does not release memory after closing document.
When I close a large document Photoshop does not release the memory. If I open another document the program is slow and not resposive. If I close out of Photoshop and restart it then load the other document it is quick and responsive again.
A bit late to the party here but this issue is still live and I can't find anything else on the forum similar to it (apologies if there is).
Photoshop does not seem to re-use memory it just keep allocating new right up to the limit before the prog crashes (same applies to Fireworks) so any batch/script processing of more than a handful of files is impossible.
I am Photoshop via Creative Cloud (so I am always updated to your latest release), Windows 7 64k with 8Mb memory and am using Norton Intenet Security 20.3.1.22 which is updated daily. -
Unable to clear message even after resetting.
Contact iTune Support if you still have problem.
https://ssl.apple.com/emea/support/itunes/contact.html -
Iweb not finding photos after move to external hard drive...
so I moved all my photos by copying the iphoto library to a external hard drive, deleting the old library, and telling iphoto to look to the external to find the photos and iphoto works fine.
I launched iweb, tried to go into media, and it said please launch iphoto 2 or later to show photos...I did so and nothing.
How do I point iweb in the right direction in order to work with my photos on the external hard drive?
Thanks so much,
SteveMight be a job for symbolic links!
I thought there used to be a GUI way to create symbolic links, but maybe there never was.
Anyway, here's a "little" background.
http://www.macosxhints.com/article.php?story=2001110610290643
And, if you're comfortable in the terminal, what you want to do is create a Pictures symbolic link that points to the one on your external drive (not sure what problem this might cause iPhoto... may want to point it to the symbolic link as well).
Something along the lines of
cd /Users/username/Pictures/
then
ln -s /Volumes/name-of-external/iPhoto\ Library iPhoto\ Library
or something like that. -
New iPad won't activate after resetting
iPad won't activate thru iTunes after erasing all content and settings. iPad is back at the Welcome screen like when it was new, but go thru iTunes to set it up and no activation.
Can't activate by signing in.
I can't even get to that point. After I enter a wifi password the iPad goes to activate and that's where everything stops with: Can not activate a this time. Please try again later. I've tried a million and 6 times, there is no later...
Also noticed that the serial# listed for the iPad in iTunes is N/A. After a few minutes of trying it gives me the above message. It also shows a lock near the message in iTunes. This shows that somehow the iPad is still locked after I erased all data and wanted to completely start from scratch? -
Could not open the file. Not enough memory
I have always used fireworks cs4 normally, but today, i experienced a bit of trouble. there is one png file that when i click to open it the fireworks loads but then a message pops up (could not open the file. Not enough memory) after a bit of researching, i found out that this error happens when i bring to stage one of the common libraries menu bars. (menu bar 4). Does anyone know how to fix this?
ps: I am able to open this file via file-open-*png. Please i really need help. Is the library corrupted maybe?Hi,
It opened on mine (1.2Gb). I don't think it's a memory issue. I've used FWCS4 with 512mb RAM, never had such a problem. (of course it was very slow at the start, and i used to leave for a cup of coffee first and then come back when it was ready for work. That's why i upgraded to 1.2G .)
Import this menu bar from the common library, save it again as a png and then open it with fireworks the way you did, to see if the same error occurs.
Has this happened with other files as well?
Maybe you are looking for
-
I'm having a problem with a password. The password is an integer, but my problem is that when someone tries to enter a string input, the program crashes, instead i want it to display invalid like when someone tries to enter an invalid integer passwor
-
Can't open reader on the web & can't print!!!
I made the mistake of trying to update my adobe reader to 9.3 and now I can't open .pdf files in a web browser or print any of my .pdf's. I've tried everything the support site said to and nothing's worked!!! PLEASE HELP!!!!!! Thanks!!!!
-
DAQPAD 6020e misses digital triggers during analog input (AI)
I am using a 6020E BNC DAQPAD to acquire two seperate 12kHz analog signals from a sonar through ACH0 and ACH1. The sonar generates a digital start trigger at the start of each ping to notify the DAQ that new data is to follow and i am using this to t
-
Why won't my macbook start?
I used the computer the night before. My 5 month old was playing with it and may have hit some keys that caused the computer to go off...not sure. bottom line is that it has power attached but will not turn on at all...
-
I have been trying to register for Games Centre on my iPhone 4. I have tried so many Nicknames (even obscure and ridiculous ones), and it tells me that every single Nickname is aleady in use by another user. Does anyone else have this problem? Any