Ipad not detecting wifi

Ipad 2 will not detect any wifi signals, even when close to hub. It's about 3 months out of its one year apple warranty !! We came across a small bit of info about eu consumer law, do we have any chance of getting this fixed without having to fork out more money ?? thank u any help appreciated

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Similar Messages

  • Iphone 6 not detecting wifi networks

    my iPhone 6 is not detecting wifi network, i already switched off and on.
    thanks

    cheeku2000 wrote:
    my iPhone 6 is not detecting wifi network, i already switched off and on.
    thanks
    Switched what off and on, Wi-Fi in Settings, the iPhone, the router? See this support document about troubleshooting Wi-Fi connections. If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support

  • TS1398 my phone does not detect wifi at all

    my phone does not detect wifi at all. what should i do? i did everything from turning it off to resetting my phone.

    try a hard reset and charging it. then get it replaced through apple

  • My iphone 3g is not detecting wifi it is having ios 4.2.1

    my iphone 3g is not detecting wifi it is having ios 4.2.1 how to solve this problem

    Not sure what you question is, but the 3G cannot be updated beyond iOS 4.2.1.  The 3GS can be updated to the current version (iOS 6.0.1).

  • My apple 4s with 7.0.4 os is not detected wifi devices.can u help,

    my apple 4s with 7.0.4 os is not detected wifi devices.can u help,

    If you get that message, then the device was not reset to factory settings.
    Go to Settings > General > Reset > Erase all content & settings.  Then start fresh with your new device.

  • Iphone 4s ,version 7.0.4 not detecting wifi

    my iphone 4s is not detecting wifi network and i tried by reseting the network settings....but  it doesn't work...
    please suggest me any other option...

    Erase all contents and settings does not reinstall iOS.
    If whatever the problem is applies to every wi-fi network the iPhone has access to, if no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem.

  • My iphone 4s had upgrade to ios 8.1.1 and wifi can turn on but can not detect wifi. how to downgrade ios org back in to ios 6 again?

    my iphone 4s has upgrade to ios 8.1.1 and wifi can turn on but can not detect wifi. how to downgrade ios or back in to ios 6 again? i have try to restore iphone , reset all but it can't solve my problem. any one can help me?

    You can't downgrade the iOS level.
    Try using Settings > General > Reset > Reset Network Settings.

  • Why does my ipad not detected on my lap or I can not sync itunes and updated IOS 7.1.2 this

    Why does my ipad not detected on my lap or I can not sync itunes and updated IOS 7.1.2 this

    The following may help:
    Windows computer: iOS: Device not recognized in iTunes for Windows
    Mac computer: iOS: Device not recognized in iTunes for OS X

  • Bluetooth in iPad not detecting with imac

    Bluetooth in iPad not detecting with imac

    http://support.apple.com/kb/HT3647?viewlocale=en_US&locale=en_US

  • Ipad not detected by itunes

    Ipad not detected by itunes...clues to why?

    Sometimes all that it takes is to quit iTunes, restart your computer and reset your iPad. Maybe try switching USB ports as well.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button.
    Sometimes, it isn't quite that easy and that is why these kb articles may come in handy.
    iOS: Device not recognized in iTunes for Windows - Support - Apple
    iOS: Device not recognized in iTunes for Mac OS X - Support - Apple

  • Ralink RT3290 802.11bgn Wi-Fi Adapter is not detecting wifi

    i am using HP PAVILION 15-E015TX. i reset my windows 8 OS recently because of some corruption of data. after resetting the OS everything is reinstalled to its original state. But the Ralink RT3290 802.11bgn Wi-Fi Adapter is not detecting the wifi which is worked properly before resetting the OS. when i run the troubleshoot option under HP SUPPORT ASSISTANT it shows a red mark while resetting the adapter. 
    i want to know how can i fix it. 
    This question was solved.
    View Solution.

    Rats.
    I hope the replacement card fixes the problem.  Over the years I have had just one bad network card -- and it drove me nuts tracking down that it was, indeed, a failed card. 
    Good Luck - post back if you like and let us know the results!
    Click the Kudos Star!
    It is a nice way to say “Thank You” for the help.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • IPad not detecting in Xcode

    Hi, my iPad is not detected in the xcode even the required certificates are installed in the iPad. I thought updating the iPad iOS version could fix this and now i got into some trap.
    Now the iOS version of my iPad is 5.1 and my xcode supports until 5.0 . I don't want to update my xcode , instead i was thinking to downgrade the version of the iPad. Now i want to rollback the iOS version in my iPad. Can anyone tell me how ?

    There are 3 different HP printers in the AirPrint website, so I assume that one of those is your model.
    If you power cycled the router, and then printer (unplugged both for about 30 seconds and then plugged them in again), and updated the firmware which I assume HP support would have suggested, maybe some help from Belkin would be in order.
    The only other things that I can think of would be to reinstall the printer software, reboot the iPad, or reset all settings on the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.

  • 7520 not detecting wifi

    have had to replace router with a new one opertiong on two frequencies 2.4 ghz and 5 ghz the printer will not detect either of these. Had no problems with the previous router.  
    Also other wifi devices ie. phone, tablet, laptop have no problems in detecting new router.
    Any suggestions 
    This question was solved.
    View Solution.

    Does the Wireless Setup Wizard display the new SSID in the list. (you can only see the 2.4 ghz)
    Which router did you get?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • HT4623 iphone does not detect wifi

    I have factory unlocked iphone 4s. It can not detect my home wifi. I tried every possible alternatives ...resetting, restarting. Nothings working. It can detect other wifi in the range. My wifi is in good condition. I am using this from my laptop. But only my phone does not detect this connection ?
    Please help me out.

    WE're going to need a bit more... what steps have you tried... what if any error messages do you get... at what step in the restore does it get blocked.... what happens,,, does it freeze, black out, not restart etc...

  • Lenovo M90Z Not Detect WIFI Adapter

    Dear Forum
    I have problem with my Lenovo Thinkcentre M90Z.
    Recently, the Wifi Card was not detect any wifi signal available in the near site.
    I trying to uninstall the driver to solve the problem.
    But unfortunatelly, after unisntall the Wifi adapter dissapear from the network adapter list.
    I have try re-isntall the driver but no result.
    Also try to re-attach the WIFI card to the slot, but it still not recognized by the OS.
    Any solution for this problem?
    Here the screen capture of the device manager and the network adapter list :

    Have you tried Safe mode with Networking? Check if the adapter is being detected in Safe mode. You can reboot in Safe Mode by pressing the 'F8' key repeatedly as soon as you turn on the computer. If you're using Windows 8, refer to this link for how to start your system in Safe Mode:
    http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode
    If the adaptor is being detected in Safe Mode, try updating the drivers and uninstalling any new hardware or software that you might have installed recently. If it still doesn't work, try doing a system restore back to the point when the adaptor was detected.
    If the adaptor is still not getting detected even in Safe Mode, it's probably a faulty adaptor, or it might not be connected properly on the mother board. You might have to open the system to check the connections. Keep in mind that opening the system up might void your warranty if the system is still in warranty.
    GuruAid

Maybe you are looking for

  • How to delete my iCloud using an old email no longer in use.

    I have an old AOL account that I no longer use.  I tried resetting the password but that didn't work.  So every time I go to delete the account it asks for my password which I do not know or not able to get anymore.  Does anyone know a way to delete

  • My iMac will not boot up in any mode

    Tried normal mode Tried safe mode Tried install DVD Tried hardware test with application DVD Tried hardware test from Internet ( not supported my my machine ) Any suggestions ?

  • Cursor (Mouse pointer) icon automatically changes

    I am using Windows 8.1 and Office 365. I have downloaded a mouse pointer icon in .cur format. I applied changes to the mouse pointer and it changed successfully. For sometime it will remain the same, but later (a few days) it changes back to the defa

  • Opening .avi file in QT & getting "some necessary QT software is missing"

    Firstly, I don't know alot about Mac or QT as I've never used one until I bought my MacBook about a month ago. So forgive me if this is a stupid question! When I try to open a .avi file in QT, I get the following message: "Some necessary QuickTime so

  • Imported photos- offline?

    I recently imported photos from my camera to my laptop and Photoshop Elements 11. Why do each of the impages have an icom that says they are offline? And when I try to enlarge them, they are blurry?